Marcos Flávio de Campos2014-12-31Materials science forum
The coercivity in soft and hard magnetic materials has different origin. The high coercivity of barium ferrite, SmCo 5 , Sm 2 Co 17 or Nd 2 Fe 14 B is due to high magnetocrystalline anisotropy, and the processing aims very small grain size (nanocrystalline). In the case of soft magnetic materials, the coercivity has o…
Metallic Glasses and Amorphous AlloysMagnetic Properties and ApplicationsMagnetic Properties of Alloys
Kenneth Kanayo Alaneme2014-12-31Acta Metallurgica Slovaca
The hardness, and corrosion behaviour of ferromanganese modified Cu-Al alloys in selected industrial and biological fluids has been investigated. Cu-Al alloys containing approximately 12wt% Al were produced by casting with varied lean additions of ferromanganese ranging from 0.1 – 0.4 wt% of the charge. The alloys wer…
Metal Alloys Wear and PropertiesPowder Metallurgy Techniques and MaterialsMetallurgy and Material Science
Sanja Milošević、Ivana Stojkovic、Miodrag Mitrić 等 4 位作者2014-12-31Journal of the Serbian Chemical Society
The VO2 (B) was synthesized via a simple solvothermal route at 160oC in ethanol. The initial discharge capacity of VO2 (B) anode, in saturated aqueous solution of LiNO3, was 177 mAh g-1 at a current rate of 50 mA g-1. After 50 cycles capacity fade was 4%, but from 20th-50th cycle no capacity drop was observed. The VO2…
Advancements in Battery MaterialsTransition Metal Oxide NanomaterialsAdvanced battery technologies research
Zeyi Tu、Xuri Huang、Yuanping Yi2014-12-31Journal of Materials Chemistry C
Good ambipolar charge-transport characteristics have been revealed for the halogenated anthanthrone crystals by DFT and MD calculations.
Nonlinear Optical Materials ResearchPhotochemistry and Electron Transfer StudiesOrganic and Molecular Conductors Research
Alexander Sukhov、Chenglong Jia、L. Chotorlishvili 等 6 位作者2014-12-31Physical Review B
We investigate theoretically how ferromagnetic resonance (FMR) in a multiferroic heterostructure provides quantitative information on multiferroic coupling. In particular, we analyze the asymmetry of the angular dependence of FMR on the direction of resonance magnetic fields as experimentally reported for ${\mathrm{Co…
Ferroelectric and Piezoelectric MaterialsMultiferroics and related materialsAdvanced Condensed Matter Physics
Kaline P. Furlan、Julia Zimmermann de Assunção、G. Paz 等 5 位作者2014-12-31Materials science forum
The development of dry self-lubricating materials is directly linked to the rising requirements of performance. Iron and steel are the most used metals around the world and molybdenum disulfide (MoS 2 ) one of the most used solid lubricant. Therefore it is expected that one might try to develop self-lubricating steels…
Metal Alloys Wear and PropertiesPowder Metallurgy Techniques and Materials
Carlos Alvarez、Russell L. Leonard、Sharon K. Gray 等 5 位作者2014-12-31Journal of the American Ceramic Society
The presence of BaCl 2 nanocrystals and the crystallographic phase that they adopt controls the optical behavior of fluorochlorozirconate glass‐ceramics. We have used in situ X‐ray diffraction heating experiments and ex situ transmission electron microscopy to follow the BaCl 2 nanocrystal nucleation and growth proces…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsMicrowave Dielectric Ceramics Synthesis
Flávio Perpétuo Briguente、Luciana Aparecida Narciso da Silva Briguente、Danieli Aparecida Pereira Reis 等 4 位作者2014-12-31Materials science forum
Titanium and its alloys are largely used for many industrial applications due to their high mechanical and corrosion resistance and low specific mass. Ti-6Al-4V alloy is the most used in aerospace industry and it is applied for the manufacturing of aircraft blades and steam turbines. This alloy has high affinity with…
Metal and Thin Film MechanicsIntermetallics and Advanced Alloy PropertiesTitanium Alloys Microstructure and Properties
Javad Farzanfar、Ali Reza Rezvani2014-12-31Comptes Rendus Chimie
The influence of three preparation methods on the properties and reaction performances of a titania-supported Mn–Cr bimetallic nanocatalyst for high-temperature water–gas shift reaction has been studied. Impregnation, co-precipitation and thermal decomposition of the [Mn(H 2 O) 6 ] 3 [Cr(NCS) 6 ] 2 ·H 2 O/TiO 2 precur…
Catalytic Processes in Materials ScienceCatalysts for Methane ReformingCatalysis and Oxidation Reactions
J. Saranya、P Sounthari、A. Kiruthika 等 7 位作者2014-12-31Oriental Journal Of Chemistry
Oriental Journal of Chemistry is a peer reviewed quarterly research journal of pure and applied chemistry. It publishes standard research papers in almost all thrust areas of current chemistry of academic and commercial importance. It provides a platform for rapid publication of quality research papers, reviews and ch…
Corrosion Behavior and InhibitionInorganic and Organometallic ChemistrySynthesis and Biological Evaluation
Jijoy. P. Mathew、George Varghese、KSCSTE , India 等 4 位作者2014-12-31SOP Transactions on Applied Physics
Zn1 xNixO thin films were prepared on glass substrate by sol-gel dip coating method. The concentration of Ni in the films varies as x=0.02,0.04,0.06,0.08 and 0.10.To understand about the influence of annealing temperature on the structural and optical properties, the Zn0:94Ni0:06O thin films are annealed at three diff…
ZnO doping and propertiesGas Sensing Nanomaterials and SensorsTransition Metal Oxide Nanomaterials
Jijoy. P. Mathew、George Varghese、Physics , KSCSTE , India 等 4 位作者2014-12-31SOP Transactions on Nano-technology
Zn1 xCuxO thin films are prepared from inexpensive sol-gel dip coating technique using PVA as a polymer precursor. The concentration on the films x varies from 0.02 to 1 insteps of 0.02. The effect of doping concentration and annealing temperature on the structural and optical properties are thoroughly studied. It has…
ZnO doping and propertiesGas Sensing Nanomaterials and SensorsCopper-based nanomaterials and applications
Ömer Yurdakul、Dursun Ali Köse2014-12-31Hittite Journal of Science & Engineering
In the scope of this study, acesulfame ace, acs -nicotinamide na mixed ligand complexes of Mg II , Ca II , Sr II and Ba II were synthesized for the first time. Possible formulas for complexes were determined as [Mg H2O 4 na 2] acs 2, [Ca H2O 6 na 2] acs 2, [Sr H2O 7 na 2] acs 2, [Ba H2O 7 na 2] acs 2 . It was observed…
Crystallography and molecular interactionsThermal and Kinetic AnalysisChemical Thermodynamics and Molecular Structure
Mônica Calixto de Andrade、Geysa N. Carneiro、Elizabeth L. Moreira 等 5 位作者2014-12-31Materials science forum
Solid-state reactions were used to synthesize pure and doped barium titanate powder. Barium titanate formation with tetragonal perovskite structure was detected by X-ray diffraction and occurred at a temperature above 700°C for pure powder and 500°C for doped powder. However, quite crystalline samples were observed on…
Ferroelectric and Piezoelectric MaterialsMicrowave Dielectric Ceramics SynthesisElectronic and Structural Properties of Oxides
Aurélien Hameau、Séverine Fruchon、Christian Bijani 等 9 位作者2014-12-31Journal of Polymer Science Part A Polymer Chemistry
ABSTRACT The synthesis of new series of PPH (poly(phosphorhydrazone)) dendrimers with amino‐PEG phosphonates or the corresponding amino‐PEG phosphonic acids as terminal groups is presented, from generations 1–3. The size of PEG‐terminated dendrimers is experimentally measured by diffusional NMR, and by means of dynami…
RNA Interference and Gene DeliveryChemical Synthesis and AnalysisDendrimers and Hyperbranched Polymers
Sunghyun Yoon2014-12-31Journal of Magnetics
Superparamagnetic maghemite nanoparticles were prepared by chemical co-precipitation, followed by a temperate oxidation stage, and investigated using FE-SEM, XRD, TGA, VSM, and M<TEX>$\ddot{o}$</TEX>ssbauer spectroscopy. Through SEM image and XRD analysis, its average particle size was found to be 13.9 nm. While VSM m…
Nanoparticle-Based Drug DeliveryMagnetic Properties and Synthesis of FerritesCharacterization and Applications of Magnetic Nanoparticles
Alvin L. Lee、Li Tao、Deji Akinwande2014-12-31ACS Applied Materials & Interfaces
Thin metal films can be used to catalyze the growth of nanomaterials in place of the bulk metal, while greatly reducing the amount of material used. A big drawback of copper thin films (0.5-1.5 μm thick) is that, under high temperature/vacuum synthesis, the mass loss of films severely reduces the process time due to d…
Advancements in Battery MaterialsGraphene research and applicationsGraphene and Nanomaterials Applications
Himchan Cho、Seong Dae Kim、Tae-Hee Han 等 11 位作者2014-12-312D Materials
We report improvement of hole injection efficiency of a graphene anode by tuning its work function (WF) via surface fluorination. We used chemical vapor deposition to synthesize high-quality graphene sheets and then treated them with CHF3 plasma to induce fluorination. We used x-ray photoelectron spectroscopy to exami…
Graphene research and applicationsAdvanced Sensor and Energy Harvesting MaterialsAdvanced Memory and Neural Computing
Cihat Taşçıoğlu、Mürşit Tufan、Mesut Yalçın 等 4 位作者2014-12-31Journal of Thermoplastic Composite Materials
The aim of this study was to investigate the dimensional stability, mechanical and biological performance and thermal degradation of wood–plastic composites made from high-density polyethylene and recycled wood treated with chromated copper arsenate (CCA), a commonly used wood preservative chemical. Virgin pine wood s…
Natural Fiber Reinforced CompositesLignin and Wood ChemistryPolymer Foaming and Composites
Tomoki Okuhata、Yoichi Kobayashi、Yoshiyuki Nonoguchi 等 5 位作者2014-12-31The Journal of Physical Chemistry C
Semiconductor–metal hybrid nanostructures (HNs) are promising materials for photovoltaics and photocatalysis because of their efficient charge separation in the excited state. However, analysis of their carrier dynamics has been limited to only a handful of HNs, such as CdSe–Au and CdS–Au. Herein, we synthesized and c…
Gold and Silver Nanoparticles Synthesis and ApplicationsQuantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin Films