M.A. Quraishi、Jaya Rawat2000-10-01Anti-Corrosion Methods and Materials
Inhibition of the corrosion of mild steel in 1‐5 N HCl and H 2 SO 4 by a macrocyclic compound viz., tetramethyl‐dithia‐octaazacyclotetradeca hexaene (MTAT) was studied as a corrosion inhibitor by weight loss and electrochemical potentiodynamic polarization methods. The influence of temperature, immersion time and acid…
Corrosion Behavior and InhibitionEpoxy Resin Curing ProcessesConcrete Corrosion and Durability
А. Н. Лачинов、T. G. Zagurenko、В. М. Корнилов 等 6 位作者2000-10-01Physics of the Solid State
The electrical conductivity in a metal-polymer-nanocrystalline metal system has been investigated as a function of temperature. It is found that this system undergoes a transition to the high-conductivity state at temperatures of structural transformations in nanocrystalline electrodes. The results are interpreted wit…
Carbon Nanotubes in CompositesNanopore and Nanochannel Transport StudiesNanotechnology research and applications
Takeshi Endo、Fumio Sanda2000-10-01Macromolecular Symposia
Ring-opening polymerization of cyclic carbonates was studied. Volume expansion during polymerization of cyclic carbonates could be explained by the difference between intermolecular interaction of monomers and polymers, which was evaluated by dipole moment. A seven-membered cyclic carbonate polymerized much faster tha…
Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesCarbon dioxide utilization in catalysis
Barbara Malič、Marija Kosec、Iztok Arčon 等 6 位作者2000-10-01Integrated ferroelectrics
Selective modification of zirconium alkoxide by acetic acid or acetylacetone was used in solution processing of PZT Pb(Zr, Ti)O3 thin films by 2-methoxyethanol route. EXAFS results clearly show a decrease of Zr-O-Zr links in the acetic acid modified PZT sol implying a more homogeneous constituent metal distribution. N…
Ferroelectric and Piezoelectric MaterialsPerovskite Materials and ApplicationsMicrowave Dielectric Ceramics Synthesis
Thobias Sjöqvist、Sung‐Mo Jung、Pär G. Jönsson 等 4 位作者2000-10-01Ironmaking & Steelmaking Processes Products and Applications
An investigation into the cleanness of steel manufactured by a major Scandinavian producer of steel for railway wheels has been carried out. Samples taken before and after secondary refining in the ladle and after degassing were compared with samples taken similarly from a heat including the addition of a calcium carb…
Microstructure and Mechanical Properties of SteelsMetallurgical Processes and ThermodynamicsMetal Alloys Wear and Properties
Geoffrey Gregory、R. Hamby2000-10-01Surface Engineering
The cutlery & Trades Research Association (CATRA) has recently concluded a two year research project, funded by the Department of Trade and Industry Focus Technology Programme, to review the sharp edge retention of hand held and machine knives and blades. Results for sharpness and wear performance of cutting edges…
Additive Manufacturing and 3D Printing TechnologiesAdhesion, Friction, and Surface InteractionsMetal Alloys Wear and Properties
Jae-Mo Goh、Wha‐Tek Kim、Moon‐Seog Jin 等 6 位作者2000-10-01Journal of Applied Physics
The optical energy band gaps of BaAl2S4 and BaAl2Se4 single crystals at 300 K were found to be 3.98 and 3.35 eV, respectively, and the optical energy band gaps of Ho3+, Er3+, and Tm3+-doped BaAl2S4 and BaAl2Se4 single crystals were smaller than those of the undoped single crystals. Photoluminescence spectra peaked at…
Luminescence Properties of Advanced MaterialsCrystal Structures and PropertiesSolid-state spectroscopy and crystallography
Mukta Arora B. K. Behera2000-10-01Energy Sources
Petroleum reserves of the world may not last forever. There is a need to develop alternative and renewable sources of petroleum. Petrocrops (wild and waste plants) are renewable sources of petroleum hydrocarbons. Calotropis procera is one of the potential candidates for petrofarming. The latex obtained from C. procera…
Lignin and Wood ChemistryPhytochemistry and Bioactive Compounds
Hirosuke Watanabe、Masashi Furukawa、Tadahiko Takata 等 4 位作者2000-10-01Macromolecular Symposia
The application of the low-temperature plasma method, the excimer laser treatment method and the corona-discharge method to aramid) were discussed, presenting an overview of current trends and developments in this area.
Surface Modification and SuperhydrophobicityDiamond and Carbon-based Materials ResearchFiber-reinforced polymer composites
Noboru Oyama2000-10-01Macromolecular Symposia
Novel polymer composites based on polydisulfide compounds are developed as a high energy density cathode material for lithium rechargeable batteries. A polymer composite composed of 2,5-dimercapto-1,3,4-thiadiazole (DMcT) and conducting polymer polyaniline (PAn) on a copper current collector provides high charge densi…
Advanced Battery Materials and TechnologiesConducting polymers and applicationsSynthesis and properties of polymers
Akio Kagawa、Masahiro Fukumoto、Kazuhiro Kawamura2000-10-01Journal of Nuclear Science and Technology
Bitumen has been used as a matrix for low-level radioactive liquid waste in Japan and other countries.Originally, bituminization was adopted for dumping at sea, but today underground disposal is being considered.Under this disposal condition chemical, radiolytic, and microbial degradation may affect the performance of…
Concrete Corrosion and DurabilityGraphite, nuclear technology, radiation studiesMaterial Properties and Failure Mechanisms
Manouchehr Lajavardi、Donald J. Kenney、Sheng Hsien Lin2000-10-01Journal of the Chinese Chemical Society
Abstract The nanocrystalline cubic Phase of zirconia was found to be thermally stabilized by the addition of 2.56 to 17.65 mol % Y 2 O 3 (5.0 to 30.0 mol % Y, 95.0 to 70.0 mol % Zr cation content). The cubic phase of yttria stabilized zirconia was prepared by thermal decomposition of the hydroxides at 400°C for 1 hr.…
Advanced ceramic materials synthesisThermal and Kinetic AnalysisNuclear materials and radiation effects
Vladimir Y. Lunin、Natalia L. Lunina、T. Petrova 等 6 位作者2000-10-01Acta Crystallographica Section D Biological Crystallography
If only native amplitudes are used for structure determination, then additional 'theoretical' information is necessary to determine their phases. For use in a phasing procedure, this information can be formulated as a selection criterion (figure of merit) which assigns a reliability weight to every trial phase set and…
Advanced Electron Microscopy Techniques and ApplicationsElectron and X-Ray Spectroscopy TechniquesX-ray Diffraction in Crystallography
Saïd Belaaouad、Kacem Sbai、A. Kenz 等 4 位作者2000-10-01Materials Research Innovations
Ammonium and barium cyclotriphosphate monohydrate, BaNH4P3O9·1H2O, was prepared for the first time by using Boullé's process [1] by Durif et al. [2] who reported a complete description of the atomic arrangement. BaNH4P3O9·1H2O is monoclinic P21/n with the following unit-cell dimensions: a=11.70(1)Å, b=12.12(1)Å, c=7.5…
Chemical Synthesis and CharacterizationX-ray Diffraction in CrystallographyPigment Synthesis and Properties
A.A. Al-Zahrani、Yahia A. Alhamed2000-10-01Journal of Environmental Science and Health Part A
Solvents screening experiments using a Soxhelt extractor were conducted to determine the best solvents for oil removal from spent bleaching clay. The solvents extracted oil in the following decreasing amount: methylethylketone > benzene‐ethanol mixture (1:1 by volume) > acetone > trichloroethylene = dichloromethane >…
Clay minerals and soil interactions
Masanori Hirano、Michio Inagaki、Yasunobu Mizutani 等 6 位作者2000-10-01Journal of the American Ceramic Society
Significant improvement in the fracture strength, accompanied by an enhancement in the electrical conductivity, of zirconia polycrystals that were doped with 3–7 mol% Sc 2 O 3 was obtained by sintering at 1300°C for 1 h in air, followed by hot isostatic pressing (HIP) at 196 MPa at 1300° and 1450°C for 1.5 h in an arg…
Advancements in Solid Oxide Fuel CellsCatalysis and Oxidation ReactionsElectronic and Structural Properties of Oxides
Tomoyuki Sugiyama、Toyoshi FUKETA2000-10-01Journal of Nuclear Science and Technology
The dominant factor of mechanical energy generation during high burnup fuel failure under reactivity initiated accident (RIA) conditions is discussed on the basis of results from recent two RIA-simulating tests with burnup fuel rods and separate-effect tests with powder fuels. When cladding failed during the RIA condi…
Nuclear reactor physics and engineeringNuclear Materials and PropertiesNuclear Engineering Thermal-Hydraulics
P. Rudolph、Akira Yoshikawa、Tsuguo Fukuda2000-10-01Japanese Journal of Applied Physics
The stable capillary growth conditions for pulling, from melt, 500-mm-long fiber crystals with constant diameter in the region 150–270 µm by the micro-pulling-down method are investigated. As a model, a substance with the sapphire/YAG eutectic composition is used. The experimental results are compared with theoretical…
Surface Modification and SuperhydrophobicityTextile materials and evaluationsFluid Dynamics and Thin Films
Manouchehr Lajavardi、Donald J. Kenney、Sheng Hsien Lin2000-10-01Journal of the Chinese Chemical Society
Abstract The nanocrystalline cubic phase of zirconia was found to be thermally stabilized by the addition of 3 to 40 mol % manganese. The nanocrystalline cubic, tetragonal and monoclinic phases of zirconia stabilized with manganese (III)oxide (Mn‐Stabilized Zirconia) were prepared by thermal decomposition of carbonate…
Ferroelectric and Piezoelectric MaterialsAdvanced ceramic materials synthesisNuclear materials and radiation effects
К. С. Журавлев、A. Yu. Kobitsky2000-10-01Semiconductors
The kinetics of photoluminescence (PL) and steady-state PL from silicon nanocrystals formed in the SiO 2 matrix by silicon ion implantation were studied experimentally for the first time in the temperature range from liquid-helium to room temperature. A dramatic increase in the photoluminescence decay time, accompanie…
Thin-Film Transistor TechnologiesSilicon Nanostructures and PhotoluminescenceNanowire Synthesis and Applications