Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Polycrystals undergoing ductile deformation develop lattice‐preferred orientation (fabric) as a result of intracrystalline slip. A consequence of fabric development is that bulk physical properties become anisotropic. Fabric development and macroscopic deformation are studied by examining three effects: nearest‐neighb…
A conceptual-scale continuous pyroelectric converter was constructed and tested. Low-grade heat was converted to electricity using a single 25 @ m thick 60%-40% P(VF 2 -TrFE) copolymer film. A pyroelectric conversion cycle conceived by Olsen was adopted; external control voltage was cycled between high and low in sync…
Surface modification of poly(lactic acid) (PLA) film surface by Ar-plasma was investigated by contact angle measurements and XPS in order to answer the following two questions. (1) Could the Ar-plasma modify the PLA film surfaces? (2) What chemical reactions occurred on the film surfaces during the Ar-plasma treatment…
Microemulsions (oil-in-water) have been used as templates to engineer stable emulsifying wax and Brij 72 (polyoxyl 2 stearyl ether) nanoparticles. The technique is simple, reproducible, and amenable to large-scale production of stable nanoparticles having diameters below 100 nm. Investigation of the process variables…
Abstract—We use the three dimensional Finite Difference Time Domain (FDTD) technique to study metamaterials exhibiting both negative permittivity and permeability in certain frequency bands. The structure under study is the well-known periodic arrangement of rods and split-ring resonators, previously used in experimen…
There have been numerous efforts in processing metallic alloys into fine-grained materials, so as to exhibit high strain rate superplasticity (HSRSP) and/or low temperature superplasticity (LTSP). The current study applied the most simple and feasible one-step extrusion method on the commercial AZ31 magnesium ingot to…
A zero order lumped parameter control oriented model of a Selective Catalytic Reduction (SCR) catalyst is presented. The lumped parameter model is developed using two approaches. in the first approach it was assumed that the catalyst behaves as an Isothermal Continuously Stirred Tank Reactor (ICSTR). The second approa…
Polypyrrole (PPy) films deposited by the galvanostatic method at 4°C with polymerization charges equal to/less than 1.0 C cm −2 were demonstrated to exhibit ideally capacitive characteristics with a high specific capacitance of 268 F g −1 for application to electrochemical supercapacitors. Influences of the polymeriza…
The second-phase particles (SPP) play an important role on the corrosion and hydriding properties of BWR Zircaloy-type materials. It has been proposed that the chemical composition of the SPPs as well as the SPP size distribution strongly affect the in-reactor performance. Zr-Fe, Zr-Cr, and Zr-Ni binary alloys were pr…
Cutometer is a commercially available non-invasive suction skin elasticity meter. The present study discusses some aspects of the biological informativeness and interpretation of the results obtained in studying skin mechanical properties with cutometer. We analyze the results of previously published studies on the me…
The function of oxygen storage capacity (OSC) is very important to improve a performance for an automobile exhaust catalyst. CeO2-ZrO2 solid solution has an excellent OSC, and is available for a catalytic promoter. In this paper, OSC of the CO reduced CeO2-ZrO2 solid solution having various composition loaded with Pt…
A method for the preparation and characterization of bioinorganic conjugates made with highly luminescent semiconductor CdSe–ZnS core-shell quantum dots (QDs) and antibodies for use in fluoroimmunoassays is presented. The conjugation strategy employs two routes: 1. Use of an engineered molecular adaptor protein, attac…
A three dimensional modified cellular automaton model (3-D MCA) was developed in order to simulate the evolution of microstructures in solidification of alloys. Different from the classical cellular automata in which only the temperature field was calculated, this model included the solute redistribution both in liqui…
To improve the hydrophilicity and reduce the aging effect, argon and oxygen mixtures were employed in the plasma treatment of low-density polyethylene (LDPE). Argon resulted in producing more oxygen ions and radicals in the plasma than only oxygen and forming cross-linked layers on the LDPE surface. Therefore, the wat…
Mutations in the genes that code for collagen VI subunits, COL6A1, COL6A2, and COL6A3, are the cause of the dominantly inherited disorder, Bethlem myopathy. Glycine mutations that interrupt the Gly-X-Y repetitive amino acid sequence that forms the characteristic collagen triple helix have been defined in four families…
Violet-blue emission from novel aromatic bis(diazaborole)s, which were synthesized by the reaction of 2,5-bis(hexyloxy)-1,4-phenylenediboronic acid and 1,2-phenylenediamine derivatives or diaminonaphthalene derivatives, is described. White-blue emission from a 4-methoxy-1,2-phenylenediamine-derived molecule was observ…
We have conducted a broad survey of switching behavior in thin films of a range of ferroelectric materials, including some materials that are not typically considered for FeRAM applications, and are hence less studied. The materials studied include: strontium bismuth tantalate (SBT), barium strontium titanate (BST), l…
Typically, an orthodontic metal bracket is made from stainless steel. It has been shown that such metal may corrode in an acid- and chloride-rich environment. The purpose of the current study was to investigate a titanium nitride (TiN) ion-plated stainless steel orthodontic bracket's anticorrosion properties and compa…
Three topics are discussed. Enhanced anti-tumor efficacy of targeted doxorubicin-containing sterically-stabilized liposomes using an anti-beta1 integrin Fab' ligand. Use of tumor targeting with an internalizing ligand to improve the efficacy of a non-leaky cisplatin-containing sterically-stabilized liposome formulatio…
The pressure dependence of first- and second-order Raman frequencies of wurtzite ZnO has been measured up to the wurtzite-rocksalt phase transition pressure of 8.3 GPa. A small increase of the LO-TO splitting with increasing pressure is observed. This effect is related to the combined pressure dependences of the elect…