Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Abstract As a unique tubular nanoclay, halloysite nanotubes (HNTs) have recently attracted significant research attention. The HNTs have outer diameters of ∼50 nm, inner lumens of ∼20 nm and are 200–1000 nm long. They are biocompatible nanomaterials and widely available in nature, which makes them good candidates for…
Power transformers are one of the most important and expensive electrical equipment that require online condition monitoring. Partial discharge (PD) measurement is considered the most effective and non-destructive approach to observe the condition of power transformers in service. However, many sources of noise interf…
Abstract The present work was conducted to assess the weldability of duplex stainless steel in underwater conditions. Metal manual arc welding (MMA) with the use of coated electrodes was used in the investigations. Tekken weldability tests were performed underwater at 0.5 m depth and in the air. Nondestructive tests,…
Concrete is the most widely used construction materials for building technology. However, cement production releases high amounts of carbon dioxide (CO 2 ) to the atmosphere that leads to increasing the global warming. Thus, an alternative, environmental friendly construction material such as geopolymer concrete has b…
Fuel flexibility is a significant advantage of solid oxide fuel cells (SOFCs) and can be attributed to their high operating temperature. Here we consider a direct internal reforming solid oxide fuel cell setup in which a separate fuel reformer is not required. We construct a multidimensional, detailed model of a plana…
Characteristics of negative DC corona threshold inception in the coaxial cylindrical electrode arrangement are investigated based on experimental data and computations on avalanche growth considering a field and atmospheric conditions dependent photoelectron emission coefficient. A transition region between glow and s…
Abstract An acoustic emission method (AE) is widespread and often applied for partial discharge (PD) diagnostics, mainly due to its ease of application as well as noninvasiveness and relatively high sensitivity. This paper presents comparative analysis of AE signals measurement results archived under laboratory condit…
In this article, the challenges with continuous partial discharge (PD) monitoring of HV power cables, transformers and rotating machines are presented. A versatile partial discharge monitoring system is described that is applicable to different high-voltage equipment and can be connected to a vast range of sensors. In…
Up until about 2005, the main application of halloysites had been as an alternative raw material to kaolinite for ceramics. Since then, however, there has been an exponential increase in studies aimed at applications of halloysite nanotubes, now widely referred to as HNTs. The readily available and relatively cheap na…
The direct synthesis of hydrogen peroxide (H 2 O 2 ) from hydrogen and oxygen has been studied using an Au–Pd/TiO 2 catalyst. The aim of this study is to understand the balance of synthesis and sequential degradation reactions using an aqueous, stabilizer-free solvent at ambient temperature. The effects of the reactio…
We report the preparation of a nanocomposite hydrogel based on a poloxamine gel matrix (Tetronic T1107) and cyclodextrin (CD)-modified barium titanate (BT) nanoparticles. The micellization and sol-gel behavior of pH-responsive block copolymer T1107 were fully characterized by small-angle neutron scattering (SANS), dyn…
The structures and nonlinear optical properties of a novel class of alkali metals doped electrides B12N12–M (M = Li, Na, K) were investigated by ab initio quantum chemistry method. The doping of alkali atoms was found to narrow the energy gap values of B12N12 in the range 3.96–6.70 eV. Furthermore, these alkali metals…
Using a single-potential-step coelectrodeposition route, Ppy-SiO2 nanocomposite films characterized by a multimodal porous structure were cathodically deposited from ethanolic solutions on oxidizable and nonoxidizable substrates for the first time. The materials produced have an interesting and unique strata-like pore…
Highly efficient solar thermal systems generally undergo stagnation conditions with temperature inside the solar collectors as high as 190-200 °C, as soon as the domestic hot water demand is poor or when the system is off while the collectors are still submitted to a strong solar radiation (> 950 W/m 2 ). These stagna…
Silver and copper nanoparticles are well-known as the good antimicrobial agent. The nano-size of particles influences in enhancing the antimicrobial activity. This paper discusses the effect of molarity on the microstructure and morphology of silver-copper core-shell nanoparticles prepared by a polyol method. In this…
The corrosion inhibition performance of 2-hydrazino-4,6-dimethoxy-1,3,5-tirazine (DMeHT), 2,4-dihydrazino-6-methoxy-1,3,5-triaizine (DHMeT), and 2,4,6-tridydrazino-1,3,5-triaizne (TH₃) on steel corrosion in acidic media was examined using electrochemical techniques. The results showed 2,4-Ddihydrazino-6-methoxy-1,3,5-…
The corrugated layer structure bismuth has been successfully tailored into negative thermal expansion along c axis by size effect. Pair distribution function and extended X-ray absorption fine structure are combined to reveal the local structural distortion for nanosized bismuth. The comprehensive method to identify t…
Alkali metal intercalated iron selenide superconductors A x Fe2-y Se2 (where A = K, Rb, Cs, Tl/K, and Tl/Rb) are characterized by several unique properties, which were not revealed in other superconducting materials. The compounds crystallize in overall simple layered structure with FeSe layers intercalated with alkal…
The possibility of biaxial orientational order in nematic liquid crystals is a subject of intense current interest. We explore the tendencies toward local and global biaxial ordering in the recently synthesized trimethylated oxadiazole-based bent-core mesogens with a pronounced asymmetric (bow-type) shape of molecules…
Topological defects (TDs) appear almost unavoidably in continuous symmetry breaking phase transitions. The topological origin makes their key features independent of systems' microscopic details; therefore TDs display many universalities. Because of their strong impact on numerous material properties and their signifi…