Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Abstract The possibility to apply the Finite Element Method to calculate internal stresses which occur in Ti+TiN, Ti+Ti(CxN1-x) and Ti+TiC coatings obtained in the magnetron PVD process on the sintered high-speed steel of the PM HS6-5-3-8 type. For the purpose of computer simulation of internal stresses in coatings wi…
The aim of this study was to fabricate carbon nanotube (CNT) and bioactive glass nanoparticles (BG) (at levels of 5 and 10 wt%) incorporated electrospun chitosan (CS)/polyvinyl alcohol (PVA) nanofibers for potential neural tissue engineering applications.The morphology, structure, and mechanical properties of the form…
The objective of the study is assessment of suitability of the ALD method for application of a TiO2 layer on surface of 316LVM steel used for production of vessel stents. Selection of the appropriate process parameters for application of the layer affects its electrochemical properties, which largely determine resista…
Abstract The microstructure of as-cast cored turbine blades roots, made of the single-crystal CMSX-4 nickel-based superalloy was investigated. Analysed blades were obtained by directional solidification technique in the industrial ALD Bridgman induction furnace. The investigations of the microstructure of blades roots…
Abstract Carbon nanotubes are one of the strongest materials of unique mechanical, optical, electrical and electronic properties. Because of that they are mainly used as semiconductor materials constituting the reinforcing phase in composite materials. The paper presents properties of polymer composites reinforced wit…
The main purpose of the investigations was to develop the phase composition of the composite assuming that the component selection criterion will be the formability of piston work surfaces during the machining. Wear resistance under the friction conditions was assumed as the additional parameter for the assessment of…
Abstract The aim of the present paper was to investigate microstructure and texture evolution of two single crystals and polycrystal of Cu-8.5%at.Al material. All of mentioned samples were deformed by HE to achieve true strain ε = 1.17. For microstructure analyzes observations by transmission electron microscope (STEM…
In the urban area, the heat island phenomenon and hot nights when the temperature does not fall below 25 °C outdoors are becoming environmental problems. Pavements cover a high percentage of the urban area and largely affect the development of the urban heat island phenomenon. The authors have developed water retainin…
Implant and a tooth supported dentures are avoided by dentists because of uneven distribution of occlusal loads between a stiffer implant and a more pliable tooth. The hypothesis was that a 3-point all-ceramic bridge supported on a natural second premolar tooth and a two-pieces typical implant bears safely mastication…
Abstract The work is focused on evaluation of resistance of the welded joint made of supermartensitic 13Cr6Ni2.5Mo stainless steel to sulfide stress cracking. Testing method A and solution B in accordance with NACE TM 0177 were used. All the testing samples were ruptured in a very short time interval but welded joint…
In the paper the results of research under effect of electroless phosphate coating of titanium dental implants on potentiokinetic polarization characteristic obtained in artificial saliva were presented. On the basis of electrochemical studies it was concluded that the electroless process of phosphating beneficialy ef…
This paper presents an analysis of the joint effect of fluorite and gypsum as mineralizers in the manufacture of Portland cement. A laboratory- scale Box-Behnken statistical design was used to quantify the effects of the explanatory variables fluorite content (0.00, 0.25, 0.50, and 0.75%), fluorite/gypsum ratio (2/15,…
Series of thin films of single-, bi- and tri-layered structure consisting of Ti, V, TiO2 and V2O5 layer and/or mixed Ti–V–Ni layer with different layer sequences and thicknesses were prepared by the sputtering technique on Si and SiO2 substrates. The layer chemical composition and thickness were determined by a combin…
Abstract This paper presents a comparison of the deformations and residual stresses in gear wheels after vacuum carburizing process with quenching in high-pressure nitrogen and oil. The comparison was made on a medium-sized gear wheels, made of AMS6265 (AISI 9310) steel. This steel is applied in the aerospace industry…
The aim of this study was to determine and select boundary conditions of modeling and FEM simulation for plastic processing on the example of sheet-metal forming. For sheet-metal deformation analysis, Deform 3D has been used. The study presents research methods for real and virtual conditions. There are also described…
Abstract High-quality titanium nitride thin films have been grown on a cube-textured copper surface via pulsed laser deposition. The growth of TiN thin films has been very sensitive to pre-treatment procedure and substrate temperature. It is difficult to grow heteroexpitaxial TiN films directly on copper tape due to l…
Abstract The paper presents the results of the magnetoelastic Villari effect modelling in high-permeability Mn0.51Zn0.44Fe2.05O4 ferrite. Modelling was performed on the basis of measurements of magnetoelastic characteristics of frame-shaped samples. For the modelling, the corrected Jiles-Atherton-Sablik model was used…
Abstract An improvement in fatigue strength is one of the main factors enabling the use of high-durability Al-Mg-Mn-Sc-Zr alloys in functional components of mobile robots. As part of this study, a computer simulation was carried out using ANSYS LS-DYNA software that involved the hybridization of high pressure torsion…
Abstract Aim of the present research was to apply a solid state reaction route to fabricate Aurivillius-type ceramics described with the formula Bi6Fe2Ti3O18 (BFTO) and reveal the influence of processing conditions on its crystal structure. Pressureless sintering in ambient air was employed and the sintering temperatu…
Abstract The work addresses the production of medium-Mn steels with an increased Al content. The special attention is focused on the identification of non-metallic inclusions and their modification using rare earth elements. The conditions of the thermomechanical treatment using the metallurgical Gleeble simulator and…