Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The paper presents the influence of mechanical surface damage on the physicochemical properties of plates after implantation made of CrNiMo stainless steel, used in the treatment of anterior surface deformity of the chest. Analysis of the data allowed us to investigate the effect of implant design and condition of the…
Abstract The subject of the research was a material in the form of a ϕ38×4 pipe from HCM12 steel used for steam superheater coils in power boilers with supercritical and ultra-supercritical steam parameters. This article presents results of investigations of mechanical properties and microstructure of material of the…
Abstract The paper contains results of studies into the formation of oxide layers on 10CrMo9-10 (10H2M) steel long-term operated at an elevated temperature (T = 545°C, t = 200,000h). The oxide layer was studied on a surface and a cross-section at the inner and outer surface of the tube wall on the outlet both on the f…
Abstract In the paper presented experimental data and numerical analysis of stress distribution in front of the crack of two melts of low-alloy G17CrMo5-5 cast steel-modified (M) by rare earth metals and original, unmodified (UM) in the temperature range, according to the brittle-ductile transition region. Experimenta…
The article presents an issue referring to a reduction of deformation during welding metal wire mesh into the frames. A problem of a possible reduction of deformations was described taking into account characteristics of a construction of a welded element. Technological tests and their results are provided. Technologi…
Dy and Ho iron garnets in form of nanoparticles were synthesized by citrate sol-gel method. Phase formation, lattice constant and average crystallite sizes of the samples were determined via XRD measurements. Morphology and particle size distribution were studied by TEM and chemical composition was checked by EDX. Mag…
Abstract The effect of second phase particles on grain refinement in CuFe2 alloy has been investigated by using rolling with the cyclic movement of rolls (RCMR) method. Two different population of second phase particles of Fe: coherent, about 10 nm in diameter and about 100 nm in size were obtained by applying aging t…
Abstract Creep and fatigue properties of two-phase titanium alloys show strong dependence on microstructure, especially morphology of the α and β phases which can be controlled to certain extent by proper selection of hot working and heat treatment conditions. In the paper the creep behaviour of Ti-6Al-2Mo-2Cr alloy (…
Abstract Interdiffusion between Fe (Armco) and Cu single crystals of similar orientation (around [110]) annealed at temperatures of 873 and 973K in air for 0.5 up to 4 h is studied. Formation of three phases different in their chemical composition has been observed: 1) oxide layer on Cu border (porous), 2) a layer ric…
Abstract The study presents the results of investigations of modeling the usable properties of implant surfaces made of Ti6Al7Nb alloy, using the example of a dynamic hip screw (DHS) applied in surgical treatment of intertrochanteric femoral neck fractures. Numerical simulation has been performed for the model load of…
Abstract The aim of this work was to characterize the microstructure of LMO type ceramics. The ceramics obtained by the free sintering at two temperatures 1473 K and 1573 K and two sintering times 6 and 12 h was the test material. One series was also obtained by the hot pressing method for a comparison. In all the cas…
Abstract Quantitative and qualitative evaluation of the influence of the applied sample morphology as well as parameters of deformation on the microstructure and selected properties of Ti-6Al-4V alloy after deformation was presented. Both cast Ti-6Al-4V alloy and powder compacts were used as the material under investi…
Abstract The paper presents the results of structural and magnetic properties and thermal stability for a group of functional materials based on Fe61Co10Zr2.5Hf2.5Me2W2B20 (where Me = Mo, Nb, Ni or Y). Samples were obtained in the form of ribbons using melt-spinning method. The X-ray diffraction patterns of investigat…
In this study, Ni-Mo nanocrystalline alloys were prepared on steel substrates by electrodeposition method from citrate-ammonia bath by applying current densities 30, 60 and 100 mA/cm2. Results indicated that the obtained coatings were uniform and compact. Moreover, molybdenum content in the alloy and current efficienc…
The objective of this study was to assess the present state of the reinforced concrete poles of fence at the former Auschwitz I and Auschwitz II-Birkenau concentration and extermination camp. The poles were subjected to renovation about 10 years ago. After this time some deficiencies of applied renovation method were…
Abstract In the paper the microstructures of WE43 matrix composites reinforced with carbon fibres have been characterised. The influence of reinforcement type and T6 heat treatment (a solution treatment at 525°C for 8 h, a hot water quench and a subsequent ageing treatment at 250°C for 16 h) on microstructure have bee…
In this study, Ni-Mo nanocrystalline alloys were prepared on steel substrates by electrodeposition method from citrate-ammonia bath by applying current densities 30, 60 and 100 mA/cm2. Results indicated that the obtained coatings were uniform and compact. Moreover, molybdenum content in the alloy and current efficienc…
Abstract The results of the microstructural and dielectric measurements of (Ba1-xPbx)(Ti1-xSnx)O3 (BPTSx) (x = 0, 0.05, 0.10, 0.30) polycrystalline samples are presented. The samples were obtained by means of a high temperature synthesis and their expected stoichiometry was confirmed by energy dispersive spectroscopy…
Abstract The article presents the results of Transvarestraint test of a modern precipitation hardened steel X10CrNiCuNb18-9-3 with copper. For comparison, the results of tests of conventional steel without the addition of copper X5CrNi18-10 are presented. The total length of all cracks and the maximum length of cracks…
Abstract Thermal oxidation in air may be one method to improve the properties of titanium and its alloys through its influence on the structure and properties of the material’s surface layer. This paper presents a description of oxide layers obtained on the surface of Grade 2 titanium as a result of oxidation at tempe…