Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Abstract The aim of this work was to characterize the microstructure of LMO type ceramics. The ceramics obtained by the free sintering at two temperatures 1473 K and 1573 K and two sintering times 6 and 12 h was the test material. One series was also obtained by the hot pressing method for a comparison. In all the cas…
Abstract Quantitative and qualitative evaluation of the influence of the applied sample morphology as well as parameters of deformation on the microstructure and selected properties of Ti-6Al-4V alloy after deformation was presented. Both cast Ti-6Al-4V alloy and powder compacts were used as the material under investi…
Abstract The paper presents the results of structural and magnetic properties and thermal stability for a group of functional materials based on Fe61Co10Zr2.5Hf2.5Me2W2B20 (where Me = Mo, Nb, Ni or Y). Samples were obtained in the form of ribbons using melt-spinning method. The X-ray diffraction patterns of investigat…
In this study, Ni-Mo nanocrystalline alloys were prepared on steel substrates by electrodeposition method from citrate-ammonia bath by applying current densities 30, 60 and 100 mA/cm2. Results indicated that the obtained coatings were uniform and compact. Moreover, molybdenum content in the alloy and current efficienc…
The objective of this study was to assess the present state of the reinforced concrete poles of fence at the former Auschwitz I and Auschwitz II-Birkenau concentration and extermination camp. The poles were subjected to renovation about 10 years ago. After this time some deficiencies of applied renovation method were…
Abstract In the paper the microstructures of WE43 matrix composites reinforced with carbon fibres have been characterised. The influence of reinforcement type and T6 heat treatment (a solution treatment at 525°C for 8 h, a hot water quench and a subsequent ageing treatment at 250°C for 16 h) on microstructure have bee…
In this study, Ni-Mo nanocrystalline alloys were prepared on steel substrates by electrodeposition method from citrate-ammonia bath by applying current densities 30, 60 and 100 mA/cm2. Results indicated that the obtained coatings were uniform and compact. Moreover, molybdenum content in the alloy and current efficienc…
Abstract The results of the microstructural and dielectric measurements of (Ba1-xPbx)(Ti1-xSnx)O3 (BPTSx) (x = 0, 0.05, 0.10, 0.30) polycrystalline samples are presented. The samples were obtained by means of a high temperature synthesis and their expected stoichiometry was confirmed by energy dispersive spectroscopy…
Abstract The article presents the results of Transvarestraint test of a modern precipitation hardened steel X10CrNiCuNb18-9-3 with copper. For comparison, the results of tests of conventional steel without the addition of copper X5CrNi18-10 are presented. The total length of all cracks and the maximum length of cracks…
Abstract Thermal oxidation in air may be one method to improve the properties of titanium and its alloys through its influence on the structure and properties of the material’s surface layer. This paper presents a description of oxide layers obtained on the surface of Grade 2 titanium as a result of oxidation at tempe…
Abstract The aim of the present work was to plan and carry out an experiment consisting of amorphization of industrial magnesium alloy WE 43 (Mg - 4 Y - 3 RE - 0.5 Zr) modified by the copper addition. Investigated alloy modified with 20% of copper was rapidly quenched with the use of melt spinning technique. The effec…
In this study, TIG welding was used to clad and repair the surface of cast AZ91C magnesium alloy. Then, friction stir processing and T6 heat treatment wrer applied on the welded region. Microhardness results showed an improvement in the mean hardness of welded zone and also FSPed zone. Increase in the mean microhardne…
Ternary (%mol) (64SiO2-31CaO-5P2O5) system of sol-gel derived bioactive glass fibers was prepared by electrospinning method. X-ray Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and nitrogen adsorption test (BET) analyses were performed to investigate the phase and chemical group of…
The purpose of the paper was to evaluate the resistance to high temperature corrosion of laser welded joints of finned tubes made of austenitic steel (304,304H) and nickel alloys (Inconel 600, Inconel 625). The scope of the paper covered the performance of corrosion resistance tests in the atmosphere of simulated exha…
The investigations on microstructure of P92 steel in the as-received condition and after 105 h ageing at 600 and 650 °C were carried out. For the recorded images of microstructure, the quantitative analysis of precipitates was performed. On that basis, a statistical analysis of collected data was made with the aim of…
In this study, a three-dimensional finite element (FE) model for armchair, zigzag and chiral single-walled carbon nanotubes (SWCNTs) is proposed. To create the FE models, nodes are placed at the locations of carbon atoms and the bonds between them are modeled using three-dimensional elastic beam elements. The FE model…
The extrinsic properties of NdFeB-based magnets can be tuned through partial substitution of Nd by another rare-earth element and Fe by Co, as such substitution leads to a modification in the intrinsic properties of the main phase. Optimisation of a magnet's composition through trial and error is time consuming and no…
The recovery of precious metals is necessary for environmental and economic reasons. Spent catalysts from automotive industry containing precious metals are very attractive recyclable material as the devices have to be periodically renovated and eventually replaced. This paper presents the method of removing platinum…
Abstract The influence of adding different amounts of silicon carbide on the properties (density, transverse rupture strength, microhardness and corrosion resistance) and microstructure of low alloy steel was investigated. Samples were prepared by mechanical alloying (MA) process and sintered by spark plasma sintering…