Ichiro Yamanaka、Taishi Furukawa、Kiyoshi Otsuka2000-01-01Chemical Communications
Ir(acac)3 supported on a carbon fiber-anode catalyzed the oxidations of alkanes (cyclohexane, n-hexane, adamantane) by generating strong electrophilic oxygen species from H2O at 1.3 V (Ag|AgCl) with high current efficiency, for example, 45% for cyclohexanone formation.
Electrocatalysts for Energy ConversionCatalytic Processes in Materials ScienceCatalysis and Oxidation Reactions
Hua‐Dong Huang2000-01-01Journal of Applied Polymer Science
A new self-designed mechanochemical reactor, inlaid pan-mill, was used in studying high density polyethylene (HDPE). The effects of pan-milling stress on the structure and properties of HDPE were investigated. Gel permeation chromatography, melt indexer, Fourier transformed infrared spectroscopy, electron spectroscopy…
Carbon Nanotubes in CompositesPolymer crystallization and propertiesPolymer Nanocomposites and Properties
Boris E. Burakov2000-01-01AIP conference proceedings
Our research has shown that mono-phase cubic zirconia has the highest loading capacity for Pu (not less than 10 wt. %) in the form of Zr-Pu solid solution. Zircon host-phase provides complete incorporation of 6.9 wt. % Pu into zircon crystalline structure; however, higher Pu loading into initial precursor phases cause…
Radioactive element chemistry and processingNuclear Materials and PropertiesNuclear materials and radiation effects
Hiroaki Otsuka、Kazuo Nakajima、Tadakatsu Maruyama2000-01-01Materials Transactions JIM
In this study the superelastic effect of Fe–Mn–Si–Cr shape memory alloys was investigated using a coil which permits the measurement of small strain. Fe–Mn–Si shape memory alloys were found to exhibit superelastic behavior to some extent over a temperature range above As. Superelastic behavior was most pronounced in t…
Microstructure and Mechanical Properties of SteelsShape Memory Alloy TransformationsMetallurgy and Material Forming
Sharon K. Rutledge、Bruce A. Banks、Mark Forkapa 等 6 位作者2000-01-01Journal of the American Institute for Conservation
The noncontact technique that is described uses atomic oxygen, generated under low pressure in the presence of nitrogen, to remove soot and charred varnish from the surface of a painting. The process, which involves surface oxidation, permits control of the amount of surface material removed. The effectiveness of the…
Silicone and Siloxane Chemistry
Yuanzheng Yue、Christian Rüssel、G. Carl 等 5 位作者2000-01-01VBN Forskningsportal (Aalborg Universitet)
The structure of extruded Ca(PO 3 ) 2 glass was characterised by measuring optical birefringence, thermal expansion and two dimensional rotorsynchronised nuclear magnetic resonance spectra using magic angle sample spinning (2D MAS NMR). The results give evidence not only of a macroscopic structural anisotropy but also…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsPhase-change materials and chalcogenides
E. Lefterova、P. Angelov、Y. Dimitriev2000-01-01Physics and chemistry of glasses
New glasses in the quaternary system AgI-Ag 2 O-TeO 2 .B 2 O 3 have been synthesised by rapid quenching from glass melts. The ratio between B 2 O 3 and TeO 2 was kept constant, B 2 O 3 :TeO 2 =1. Glasses were obtained with up to 50 mol% AgI. Above this value, β/γ-AgI crystallised in the amorphous matrix. It is seen fr…
Glass properties and applicationsPhase-change materials and chalcogenidesSolid-state spectroscopy and crystallography
Chen Guoqiang2000-01-01OpenAlex
Polyhydroxyalkanoate, abbreviated to PHA, is a family of polyesters produced by a variety of microorganisms. Over 90 PHA with various structure variations have been reported and the number is still increasing. Some interesting physical properties of PHA such as piezoelectricity, nonlinear optical activity and biocompa…
biodegradable polymer synthesis and propertiesElectrospun Nanofibers in Biomedical ApplicationsMicroplastics and Plastic Pollution
Yoshikazu Tanaka、Yoshikazu Aikawa2000-01-01Journal of the Japan Society of Powder and Powder Metallurgy
Mn-Al-C magnet has been produced by powder-extrusion process since 1989. It is known that rapidly solidified powder improves the magnetic properties of magnet. In this work, the possibilities to improve magnetic properties for powder-extrude Mn-Al-C-alloy were studied by using heat treated gas atomized powders. The ef…
Metallic Glasses and Amorphous AlloysMagnetic Properties and ApplicationsMagnetic Properties of Alloys
Nozomu Takano、Tomio Fukuda、Katsumichi Ono2000-01-01KOBUNSHI RONBUNSHU
アルコキシシラン化合物を用いて, 処理条件がシロキサン形態に及ぼす影響を検討した. シロキサン形態はFT-IRの拡散反射法で分析した. 試料はアルコキシシラン溶液で直接処理したKBrを用いた. 処理条件と鎖状シロキサンの生成割合との関係を評価した結果, 処理液濃度が低くなるとシロキサン結合は形成しにくく, 鎖状シロキサン成分の生成割合が高くなることがわかった. この傾向は, トリメトキシ系よりもジメトキシ系のアルコキシシラン化合物で顕著であった. メトキシ基に比べてエトキシ基を末端にもつアルコキシル化合物は, 鎖状シロキサンの生成割合が低かった. 一方, 低沸点の溶媒を処理液に用いた系は, 鎖状シロキサン生成割合が増加した. この…
Synthesis and properties of polymersSilicone and Siloxane Chemistry
Deane K. Smith、Gerald Johnson2000-01-01OpenAlex
Use of the fully digitized X-ray diffraction pattern for phase quantification has proven to be the most effective approach to achieving the theoretical accuracy potential of 1 % absolute. The digitized database quantification technique, DDBQ, was developed in the 1980s. Appropriate reference patterns are stored in sma…
X-ray Spectroscopy and Fluorescence AnalysisMachine Learning in Materials ScienceX-ray Diffraction in Crystallography
Randal E. Morris2000-01-01Journal of Electron Microscopy
Parametric statistical methods assume samples that have a normal distribution and representative sample sizes (i.e. n >20). Quantitative electron microscopy is inherently restricted to small sample sizes and a priori there is no way to know if the expression of the ligand being studied has a normal distribution. Thus…
Electron and X-Ray Spectroscopy Techniques
Yoshinori Ishii、J.M. Sykes2000-01-01Materials at High Temperatures
Oxidation tests were conducted at 450°C in air for Zircaloy-2 and modified alloys. The results showed breakaway oxidation, as has been reported previously. The microstructures of the oxide films were examined by transmission electron microscopy (TEM). Cross-sections were prepared from test samples with various thickne…
High-Temperature Coating BehaviorsHigh Temperature Alloys and CreepNuclear Materials and Properties
Andrei‐José Petrescu、P. Calmettes、D. Durand 等 5 位作者2000-01-01Protein Science
Understanding protein folding requires the determination of the configurational space accessible to the protein at different stages in folding. Here, computer simulation analysis of small angle neutron scattering results is used to probe the change in the distribution of configurations on strong denaturation of a glob…
Protein Structure and DynamicsEnzyme Structure and FunctionAdvanced NMR Techniques and Applications
Sindhu C. Vasudev、Thomas Chandy、Chandra P. Sharma2000-01-01Artificial Cells Blood Substitutes and Biotechnology
Pathologic calcification is thought to be the main cause of failure in the present generation tissue valves fabricated from glutaraldehyde pretreated bovine pericardium (BP). The present investigation describes the in vitro calcification and enzymatic degradation of bovine pericardia after hexamethylene diisocyanate (…
Dental materials and restorationsElectrospun Nanofibers in Biomedical ApplicationsSurgical Sutures and Adhesives
Wei Zhao-hui、GU Zhen-ya2000-01-01Journal of Applied Polymer Science
The feasibility of PVDF (polyvinylidene fluoride), as a novel waterproof and moisture-permeable material, to substitute PTFE (polytetrafluoroethylene) for manufacturing civil high-performance textiles was discussed. The work was focused on the design of casting solution composition (including solvent, additives, and p…
Advanced Sensor and Energy Harvesting MaterialsAdditive Manufacturing and 3D Printing TechnologiesTextile materials and evaluations
Ramaswamy Mani、Jude Currier、Mrinal Bhattacharya2000-01-01Journal of Applied Polymer Science
High-molecular-weight polymers of ϵ-caprolactone (CL) and maleic anhydride (MA) with anhydride group content of about 1% wt have been synthesized and studied. The polymerization reaction was carried out in bulk under nitrogen atmosphere. Stannous octoate (Sn(oct)2), and 2,2'-azobisisobutyronitrile (AIBN) were used as…
Polymer crystallization and propertiesPolymer Nanocomposites and Propertiesbiodegradable polymer synthesis and properties
Е. Н. Попова、V. V. Popov、L. A. Rodionova 等 9 位作者2000-01-01Texture Stress and Microstructure
Heavily cold drawn in situ Cu–Nb composites have been investigated by transmission electron microscopy (TEM) and X‐ray analysis. Dislocation density in the copper matrix has been shown to change only slightly in the investigated drawing ratio range because of the development of stage IV of deformation. In Nb filaments…
Microstructure and mechanical propertiesMetal Forming Simulation TechniquesAluminum Alloys Composites Properties
Gordana Bogoeva‐Gaceva、Biljana Mangovska、E. M�der2000-01-01Journal of Applied Polymer Science
Melt nucleation and crystallization behavior of homo-isotatic polypropylene (homo-iPP), maleic anhydride (MAH)-grafted-iPP, and MAH-modified iPP, produced from iPP and a small amount of MAH-grafted-iPP, was investigated by polarizing optical microscopy (POM), at Tc = 121–135oC. Nucleation processes at a given Tc were…
Polymer crystallization and propertiesPolymer Nanocomposites and Propertiesbiodegradable polymer synthesis and properties
Zhen-Huan Lei、Shoji Yahara、Toshihiro Nohara 等 6 位作者2000-01-01Chemical and Pharmaceutical Bulletin
Two new cardiac glycosides called cheiranthosides VI (2) and VII (3) were isolated together with a known one, glucoerysimoside (1) from the seeds of Erysimum cheiranthoides. Based on spectroscopic data, the structures of 2 and 3 were characterized as periplogenin 3-O-beta-D-glucopyranosyl(1-->4)-beta-D-fucopyranoside…
Natural product bioactivities and synthesisPhytochemistry and Biological ActivitiesPhytochemistry and Bioactive Compounds