Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
An investigation has been made of ceramics of the Al2 O3–MgO–SiO2 system produced as pellets by laser melting of powder mixtures of the component oxides, followed by relatively rapid solidification. The phase constitution and microstructural features have been investigated using X-ray diffraction, microscopy, and diff…
Abstract The effects of the die-wall material on the apparent viscosity of a blend of Hytrel and Viton and on the formation of a particle-like material, which is commonly referred to as die drool, at the polymer-metal interface were studied. The blend, which consisted of approximately 15 % Viton and 85 % Hytrel, was p…
The crystallization of amorphous carbon films, under inert atmospheres, occurs at annealing temperatures above 800 °C. In this work we have found that when the annealing of carbon films is performed under atmospheric conditions, crystallization occurs at temperatures as low as 200 °C. The catalytic effect of oxygen in…
A range of materials with brittle to ductile behavior (single‐crystal and polycrystalline alumina, aluminum/alumina composite, and metallic aluminum) were investigated by acoustic emission (AE) methods for microcracking during hardness indentations or cooling from elevated temperatures (800°C). During indentation, the…
Abstract New chemical analyses, electron and X-ray powder diffraction data, and comparison with gyrolite and reyerite show that tungusite has the ideal formula , symmetry P and a = 9.714(9), b = 9.721(9), c = 22.09(3), α = 90.13(1)°, β = 98.3(2)°, γ = 120.0(1)°, Z = 1. A structural model for tungusite is derived by sp…
Abstract A Controlled‐atomosphere cone calorimeter was used to investigate the burning of pure and flame retardant‐treated cotton fabrics. The condensed‐phase flame retardants used were Morguard (containing ammonium dihydrogen phosphate and diammonium hydrogen phoisphate) and Nochar (containing ammonium sulfate and a…
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTCalorimetric, Dielectric, and Neutron Diffraction Studies on Phase Transitions in Ordinary and Deuterated Acetone CrystalsR. M. Ibberson, W. I. F. David, O. Yamamuro, Y. Miyoshi, T. Matsuo, and H. SugaCite this: J. Phys. Chem. 1995, 99, 38, 14167–14173Publication Date (Print…
An inexpensive, highly conducting polymer‐thermoplastic composite material is reported which is both flexible and possesse a low percolation threshold. The method used to prepare the PANI‐PVC material “see Figure” allows control of the flexibility of the product through the use of commercially available plasticizers m…
The orientational ordering of several liquid crystals containing a difluorosubstituted phenyl ring has been studied through the use of C-13 NMR. The fluorinated phenyl ring of these liquid crystals have Cs symmetry, so three order parameters are required to completely describe the ordering of this ring. All three of t…
It has recently been proposed that spatially discretized versions of the Alien-Cahn and Cahn-Hilliard equations for modelling phase transitions have certain theoretical and phenomenological advantages over their continuous counterparts. This paper deals with one-dimensional discretizations and examines the extent to w…
We use ac susceptibility to study the vortex pinning force anisotropy and the magnetic lock-in effect in the organic superconductor (TMTSF${)}_{2}$${\mathrm{ClO}}_{4}$, which is believed to have an in-plane anisotropy of ${\ensuremath{\gamma}}_{\mathit{b}\mathit{a}}$\ensuremath{\sim}10 and a maximum out-of-plane aniso…
Predominant parameters in the shock-induced transition from graphite materials to diamond were examined in the present study by using quenching and powder methods under pressures of 50–60 GPa and 80–90 GPa, respectively, in the temperature range from 750 to 3500 K. Effects of the material parameters of the starting gr…
Fourier transform infrared internal reflection spectroscopy and X-ray photoelectron spectroscopy XPS have been applied to investigate the surface of polyacrylonitrile-based carbon fibers treated by chemical oxidation and electrochemical oxidation. We have found that infrared spectroscopy has comparable sensitivity to…
Capabilities and limitations of X-ray computed microtomography (CT) in characterizing relevant composite material issues as identified during manufacturing processes were investigated. Damage in engine subcomponents was evaluated and compared with damage detected in pedigreed coupon type specimens. The system used is…
Polarization reversal switching transients of nylon 11 were measured for samples annealed in various conditions. The relation between the ferroelectric properties and hydrogen bonds between main chains is discussed. Polarization reversal of nylon 11 begins by breaking of the hydrogen bonds and ends by linking of them.…
We present a numerical study of the performance of a one-dimensional Confocal Scanning Optical Microscope (CSOM) when used as a profiler of highly reflecting surfaces. The study is conducted by means of a computer simulation that describes the interaction between the incident beam and the sample in a fairly rigorous m…
The diamagnetic susceptibility χ of aligned carbon nanotubes is anisotropic: χ || differs from χ ⊥ . The ratio χ || /χ ⊥ exhibits a singularity at 40 K. Below this temperature χ || differs in samples cooled in magnetic field from those cooled in zero field. This observation suggested interaction of the magnetic moment…
Abstract The relations between the adjoint group and the additive group of a radical ring and its nilpotency are investigated. It is shown that certain finiteness conditions carry over from the adjoint group to the additive group and that the converse holds for the class of minimax groups.
We describe the effects of yarn twist on the structure, properties, and production of a T/C composite yarn. The results show that yarn twist in the special structure of a composite yarn is very critical, and good properties of 19.7 tex T/C composite yam such as high skein strength, good abrasion resistance, and low ir…
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTDescription of Phase Behavior of Polymer Blends by Different Equation-of-State Theories. 1. Phase Diagrams and Thermodynamic Reasons for Mixing and DemixingBernd Rudolf and Hans-Joachim CantowCite this: Macromolecules 1995, 28, 19, 6586–6594Publication Date (Print):September…