Cover
Treysa, an anomalous member of IIIAB irons, fell 100 years ago in Germany.
Materials Literature
文献浏览
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
SU-8/MWCNT derived Electrospun Composite Carbon Nanofabric as a High Performance Anode Material for Lithium Ion Battery
Introduction Carbon nanofibers (CNFs) have drawn a great attention for being used as anode materials for lithium ion battery due to short lithium ion transport distances, high resilience to volume expansion during cycling even at high current densities and enhanced electronic conductivity (1). Electrospinning is a pro…
Research, Development and Demonstration (RD&D) Needs for Light Water Reactor (LWR) Technologies A Report to the Reactor Technology Subcommittee of the Nuclear Energy Advisory Committee (NEAC) Office of Nuclear Energy U.S. Department of Energy
The LWR RD&D Working Group developed a detailed list of RD&D suggestions and recommendations, which are provided in Appendix D. The Working Group then undertook a systematic ranking process, described in Appendix E. The results of the ranking process are not meant to be a strict set of priorities, but rather should pr…
Channel Scaling Behavior of Amorphous In-Zn-O Thin Film Transistors with High Mobility over 35 cm2/Vsec
Amorphous oxide semiconductors (AOSs) based on In2O3 are promising due mainly to high carrier mobility1,2 and excellent optical transmittance in visible regime. Therefore, AOS materials have been integrated as active layers2 and electrodes2 into a variety of electronic devices such as high performance thin film transi…
High Dopant Activation and Diffusion Suppression of Phosphorus in Ge Crystal with High-Temperature Implantation By Two-Step Microwave Annealing
In this paper, high-temperature ion implantation and low-temperature microwave annealing were employed to achieve maximum n-type active concentration, which can be fully activated in germanium. To use the characteristic of microwave annealing more effectively, two-step microwave annealing was also employed. In the fir…
UK funding for Ceres SOFC range-extender, PEM electrode R&D
In the UK, Ceres Power is leading a consortium which has been granted funding from Innovate UK and the government's Office for Low Emission Vehicles (OLEV), to trial its solid oxide fuel cell stack module as a range-extender in commercial electric vehicles. Another project, involving Intelligent Energy, is developing…
Affiliate Plan of the IEEE Nuclear and Plasma Sciences Society
Presents a listing of the IEEE Societies associated with this publication with the Affiliate Plan. This plan, established by the IEEE Board of Directors, enables individuals who are not members of the IEEE, but who have an interest in the field of plasma science, to join the IEEE Nuclear and Plasma Sciences Society. A…
(Invited) Role of Interfaces in Achieving Self-Compliance Controlled Resistive Random Access Memory Devices for Low-Power Embedded Applications
Resistive Random Access Memory (ReRAM) devices are considered promising candidates for emerging Non-Volatile Memory (NVM) applications. ReRAM devices can be switched at very low voltages using ultra-fast pulses. In addition, these devices can be easily integrated in Complementary Metal Oxide Semiconductor (CMOS) proce…
Selbstheilende Materialien
Abstract Ewig haltbare Materialien sind ein immerwährender Wunsch des Menschen. Beschädigungen durch Deformation, Licht oder auch Abbau müssten sich selbst reparieren ‐ ähnlich wie in Biomaterialien, bei denen die Natur dies über einen Jahrmillionen langen Findungsprozess geschafft hat. Bei Selbstheilenden Polymeren v…
Understanding the Pseudocapacitive Behavior of RuO2 from First Principles
The ever increasing power of electronic devices creates a taxing demand on energy storage technology to increase the energy and power density available. Typical energy storage devices that have met this demand in the past are batteries and capacitors. A growing need for high energy and power dense materials leads to a…
Issue Information ‐ Table of Contents
A new way of quantifying the production of poly(
Low Leakage Current Al2O3 Metal-Insulator-Metal Capacitors Formed By Atomic Layer Deposition at Optimized Process Temperature and O2 Post Deposition Annealing
Introduction In integrated circuits, Metal-Insulator-Metal (MIM) capacitor is the key passive element for filtering, decoupling and oscillating, and so on. Followings are especially important requirements; high capacitance density, low leakage current density [1]. To meet these requirements, various high-k materials h…
Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
This specification establishes the requirements for copper and copper die forgings produced by hot pressing method. The forgings included here are designated with the following Copper or Copper Alloy UNS Nos.: C11000 (copper), C14500 (copper-tellurium alloy), C14700 (copper-sulfur alloy), C36500 (leaded Muntz metal),…
Test Method for Ductility of Oriented Electrical Steel
Significance and Use 4.1 This is a specialized bend test for grain-oriented steel not covered under the provisions of Test Methods E290. 4.2 This test is applicable to grain-oriented silicon steel such as covered in Specification A876 in commercial thick
Information for authors
physica status solidi (RRL) -Rapid Research Letters (www.pss-rapid.com) is presently the fastest peer-reviewed publication medium in solid state physics.It communicates important fi ndings with a high degree of novelty and need for express publication, as well as other results of immediate interest to the solid state…
Effects of H2s and pH on Tafel Slopes in Electrochemical Corrosion of High Strength Carbon Steel S-135 in Alkaline Brines
Effects of H2S concentration and pH on electrochemical corrosion of high-strength low-alloy steel, Grade S-135, in NaCl-based solutions containing H2S were investigated using linear sweep voltammetry (LSV). S-135 is often used as drill pipe in oil and natural gas exploration. LSV was conducted at a scan rate of 5 mV/s…
Peer review statement
All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Pu…
Study of the Stability and Protonic Transport of BaCe0.8M0.2O3- δ - Ce0.8M0.2O2- δ (M= Y, Eu, Sm, Tb, Gd, Nd ) Dual-Phase Membranes for Operation in Catalytic Membrane Reactors
High performance H2-permeation ceramic membranes may allow the intensification of industrial processes, reducing production and environmental costs, hence the milestone value of H2-permeation is 1 ml·cm-2·min-1. Dual-phase cer-cer materials are proposed for gas separation membranes. They may combine high ambipolar con…
(Invited) The Influence of the Carbon Support and Platinum Particles Size on Degradation of Cathode for Low Platinum Loading Catalyst Layer
The Reactive Spray Deposition Technology (RSDT) is a thin-film deposition process that overcomes many of the shortcomings of traditional vapor deposition techniques while yielding equal or better quality coatings at a lower cost [1, 2]. The RSDT process bypasses traditional wet chemical routes by simultaneously nuclea…
(Invited) Beyond-CMOS Device and Interconnect Technology Benchmarking Based on a Fast Cross-Layer Optimization Methodology
Moore’s Law scaling has last for almost half century, leading to a tremendous performance/area improvement and cost reduction. Unfortunately, in the past decade, severe challenges have been faced by the CMOS technology as the technology node enters sub-100nm region. To sustain the growing transistor performance and de…