Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 187732 / 191907 页 · 当前展示 3,754,621–3,754,640 / 3,838,132 条匹配结果 · 摘要仅作预览

New, Non-symmetrical 2:2 Phthalocyanines. 1,2,3,4,15,16,17,18-Octaphenyl-9,23(24)-dinitrophthalo- and 1,2,3,4,19,20,21,22-Octaphenyldiphthalo-11,29(30)-di-tert-butyl-dinaphthalocyanine Copper Complexes

Victor N. Nemykin、Nikita B. Subbotin、N. A. Kostromina 等 4 位作者1995-01-01Mendeleev Communications

The reaction between tetraphenylphthalonitrile and 4-phthalonitrile or 6-tert-butylnaphthalonitrile in the presence of copper(I) chloride gives a non-statistical mixture of non-symmetrical phthalocyanines from which 2:2 complexes are separated; in the reaction between substituted phthalo- and naphthalonitriles the 2:2…

Porphyrin and Phthalocyanine ChemistryPhotochemistry and Electron Transfer StudiesMetal-Catalyzed Oxygenation Mechanisms

Elastic Stress Relaxation in HRTEM Specimens of Strained Semiconductor Heterostructures and its Influence on the Image Contrast

Liberato De、Antonino Giuffrida、Elvio Carlino 等 4 位作者1995-01-01Microscopy Microanalysis Microstructures

HRTEM observations require ultra-thinned specimens and, due to the very small thick- ness (1 to 30 nm), an elastic stress relaxation may occur near the free surfaces of strained heterostruc- tures. These relaxation phenomena can modify the structural features of the thinned specimens with respect to the bulk materials…

Machine Learning in Materials ScienceElectron and X-Ray Spectroscopy TechniquesX-ray Diffraction in Crystallography

Titrimetric determination of free and total acidity and the subsequent deduction of zirconium content in process samples of zirconium nitrate

A. Umamaheshwari、B. Narasimha Murty、R. B. Yadav 等 4 位作者1995-01-01The Analyst

A simple titrimetric method for the rapid determination of free nitric acid concentration and total acidity in process samples of zirconium nitrate is described. This paper also details a theoretical method of deducing the zirconium oxide content of these samples based on the free and total acidity values. Sodium fluo…

Radioactive element chemistry and processingThermal and Kinetic AnalysisChemical Synthesis and Characterization

Treatment of Steel with Alkaline-earth Elements.

G. A. Irons、Xuanfeng Tong1995-01-01ISIJ International

To evaluate the potential benefits of strontium treatment of steel compared to calcium, steel-clad wires of calcium-silicon, calcium and strontium were fabricated. Lengths of these wires were injected to 35 kg heats of AISI 1045 steel. Samples for total calcium or strontium, oxygen, sulphur, and aluminum were taken as…

Metallurgical Processes and ThermodynamicsGraphite, nuclear technology, radiation studies

Kinetics of Enthalpy Relaxation upon Physical Aging in Poly (ethylene terephthalate)

Kuniyoshi Itoyama1995-01-01Nihon Reoroji Gakkaishi

Kinetics of enthalpy relaxation upon physical aging was examined for both amorphous, isotropic poly (ethylene terephthalate)(PET) and semi-crystalline, anisotropic PET samples below their glass transition temperature (Tg). After isothermal aging a DSC endothermic peak was observed near Tg and its shape, size and posit…

Polymer crystallization and propertiesPolymer Nanocomposites and Propertiesbiodegradable polymer synthesis and properties

Effect of Water, Anion, and Dissolved Oxygen on Corrosion Behavior of Iron in Methanol Solutions

Keizo Hosoya、Katsuhisa Sugimoto1995-01-01Journal of the Japan Institute of Metals and Materials

Effects of water, anions, and dissolved oxygen content in methanol solutions on the corrosion of iron have been examined by immersion corrosion and electrochemical polarization tests. The corrosion of iron in methanol solutions was controlled by passivation behavior of iron. The passivity of iron was stabilized by wat…

Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability

A Review of the Environmental Fate and Effects of Silicone Materials in Textile Applications

G. Chandra1995-01-01OpenAlex

, ew issues are getting -e atten- nology include fluids and greases, Some silicones are supplied as neat F tion from textile x-facturers and emulsions, rubber products and resins. fluids, while others are in the form of suppliers today than the m-kxun- Silicones find application in many emulsions or room temperature c…

Textile materials and evaluations

Experimental determination of the emission cross-section spectrum of the pump transition of praseodymium

Peter M. Krummrich1995-01-01IEEE Photonics Technology Letters

A novel technique is presented which allows the experimental determination of the emission cross-section spectrum of the pump transition of praseodymium in ZBLAN glass. The technique is based on measuring the population density of the upper level as a function of pump power as well as wavelength. The emission and abso…

Glass properties and applicationsSolid State Laser TechnologiesQuantum optics and atomic interactions

Composite to Metal Joints for the ARPA Man-Rated Demonstration Article

E. T. Camponeschi、RE Bohlmann、John H. Fogarty1995-01-01Journal of Thermoplastic Composite Materials

The design, analysis and testing of composite-to-metal joints for the ARPA Man-Rated Demonstration Article are discussed. The first is a composite-to-titanium sphere joint designed to react sphere membrane stress with block compression loading. A series of uniaxial compression tests to simulate this joint assembly was…

Silicone and Siloxane ChemistryEngineering and Material Science ResearchNuclear and radioactivity studies

Preparation and Properties of ZrO<sub>2</sub>-Dispersed MgO-Al<sub>2</sub>O<sub>3</sub> Ceramics

Motonari Fujita、Hideyuki Yoshimatsu、Akiyoshi Osaka 等 4 位作者1995-01-01Journal of the Ceramic Society of Japan

ZrO2-MgO-Al2O3 powder composites were prepared by calcining gelled mixtures of Mg(OH)2, Zr-n-butoxide and Al-sec-butoxide (or Al2O3) at 1000°C for 2h. The calcined powder was cold isostatic pressed at 200MPa and sintered at 1500 to 1650°C for 1h. Fine and homogeneous tetragonal-ZrO2 grains were dispersed in the sinter…

Advanced ceramic materials synthesisMicrowave Dielectric Ceramics SynthesisMagnesium Oxide Properties and Applications

Sintering of β-Si<sub>3</sub>N<sub>4</sub> Powder Made by the Imide-Decomposition Method

Naoto Hirosaki、Yusuke Okamoto、Yoshio Akimune 等 5 位作者1995-01-01Journal of the Ceramic Society of Japan

Beta-Si3N4 powder made by the imide-decomposition method was gas-pressure sintered at 1800°C for 4h in 1MPa N2 gas. This material had a microstructure of “in-situ composite” and excellent mechanical properties (strength: 780MPa, fracture toughness: 7.5MPa·m1/2), whereas β-Si3N4 powder made by the silicon nitridation m…

Advanced ceramic materials synthesisAluminum Alloys Composites PropertiesMXene and MAX Phase Materials

Electrical Resistance and Related Properties of Mullite/Zirconia Composites

Kazuo Yamana、Shizuo Nakamura、J. Nowotny 等 5 位作者1995-01-01Journal of the Ceramic Society of Japan

Mullite/zirconia composite materials were characterized in terms of electrical conductivities, structure and microstructure. It was found that the conductivity assumes a minimum at about 10mass% ZrO2. The highest conductivity was observed in the range of 60-100mass% ZrO2. XRD studies have revealed that the tetragonal…

Advanced ceramic materials synthesisRecycling and utilization of industrial and municipal waste in materials productionThermal and Kinetic Analysis

Silica Morphology Characterized by SEM. The Effects of the Solvent Treatment and the Drying Process

Édison Pécoraro、Marian Rosaly Davolos、Miguel Jafelicci1995-01-01Journal of the Brazilian Chemical Society

Scanning electron microscopy (SEM) was used to investigated the effects of volatile solvents (such as water, propanone, ethanol, methanol or ethyl ether), treatment and drying processes, microwave ovens, drying ovens, and vacuum desiccators or freeze driers, on silica morphology. Silica gel was obtained from diluted s…

Mesoporous Materials and Catalysis

Biocompatibility of polysulfone II. Platelet adhesion and cho cell growth.

Gilson Khang、Bong Jin Jeong、H B Lee 等 4 位作者1995-01-01PubMed

Experimental results on the platelet adhesion, and CHO cell adhesion and growth onto nonionic surfactant which is composed of a long alkyl chain (n = 12-18) as the hydrophobic part, and a polyethyleneoxide (PEO) segment (n = 10-23) as the hydrophilic part coated and air-plasma treated PSf surfaces are presented in ter…

Electrospun Nanofibers in Biomedical ApplicationsPolymer Surface Interaction StudiesPeriodontal Regeneration and Treatments

Effects of Dy Compound Powder Addition on the Microstructures and the Magnetic Properties of Nd-Fe-B Sintered Magnets

Yukiko Itou、Yasuji Fukui、Takashi Kitayama 等 6 位作者1995-01-01Journal of the Japan Institute of Metals and Materials

Microstructures and magnetic properties of the Nd-Fe-B magnets sintered by adding Dy compound powder are examined. The Nd15Fe77B8 powders are mixed with Dy40Al30Cu30 compound powders and then sintered, followed by an appropriate heat treatment. It is found by EPMA analysis that the R2Fe14B main phase is composed of a…

Magnetic Properties and ApplicationsMagnetic Properties of AlloysSuperconducting Materials and Applications

A 500 Bar Gaseous Oxygen Impact Test Apparatus for Burn-Out Testing of Oxygen Equipment

C Binder、G Kieper、P. Herrmann1995-01-01OpenAlex

Gaseous oxygen impacts may occur in high-pressure oxygen systems whenever oxygen equipment is pressurized too fast. This is one of the main causes of fires in such systems. Therefore, equipment for high-pressure oxygen that contains nonmetallic sealing materials should be tested for burn-out safety. This is required b…

Engineering and Material Science Research

Short spin waves of exchange nature in ferrite films: excitation, propagation, and potential applications

P.E. Zil'berman、A.G. Temiryazev、M.P. Tikhomirova1995-01-01Uspekhi Fizicheskih Nauk

Короткие спиновые волны обменной природы в ферритовых слоях: возбуждение, распространение и перспективы применений, Зильберман П.Е., Темирязев А.Г., Тихомирова М.П.

Magnetic properties of thin filmsMagnetic Properties and Synthesis of FerritesMagnetic Properties and Applications

Mechanisms of Poor Machinability of Austempered Ductile Iron

Shigeo Yamamoto、Hirooki Nakajima、Hirobumi Miyaji1995-01-01鐵と鋼 : 日本鐡鋼協會々誌

For the purpose of high strength austempered ductile iron (ADI) has the potential to reduce the size and weight of automotive parts, however poor machinability has made it difficult to achieve broad commercial application.To clarify the mechanism of poor machinability of ADI, (i) the chips was analysed by X-ray diffra…

Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties

Préparation et caractérisation de l’acide 1-vanado-11-molybdophosphorique et de ses sels alcalins

C. Rabia、M.M. Bettahar、S. Launay 等 5 位作者1995-01-01Journal de Chimie Physique

L’acide 1 -vanado-1l-molybdophosphorique et certains de ses sels alcalins sont très actifs dans la réaction de déshydrogènation oxydante (ODH) de l’acide isobutyrique (AIB) en acide méthacrylique (AMA). Cependant leur synthèse stéréospécifique et leur identification posent encore problème. Nous avons été amenés à mett…

Polyoxometalates: Synthesis and ApplicationsVanadium and Halogenation ChemistryChemical Synthesis and Characterization

Effect of Oxygen on Sintering of Aluminium Nitride with Y<sub>2</sub>O<sub>3</sub> Sintering Aid

Gao‐Chao Lai、Yuji Nagai1995-01-01Journal of the Ceramic Society of Japan

Aluminium nitride (AIN) powders with 0-1.2 mass% of carbon and 5 mass% of Y2O3 addition were sintered at 2023 and 2073K under a nitrogen atmosphere, and the sintered samples were characterized by their oxygen content, composition of the secondary phase, microstructure, density, and thermal conductivity. With an increa…

GaN-based semiconductor devices and materialsAdvanced ceramic materials synthesisMetal and Thin Film Mechanics