Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
There is an opportunity to improve the efficiency of passive Trombe walls and active solar air collectors by replacing their conventional glass covers with lightweight polycarbonate panels filled with nanoporous aerogel insulation. This study investigates the thermal performance, energy savings, and financial payback…
The paper deals with effect of working gas pressure and temperature on surface stereometry of coatings deposited by low-pressure cold spray method. Examinations were focused on aluminium coatings which are commonly used to protect substrate against corrosion. A commercial Al spherical feedstock powder with admixture o…
Inconel 718 is one of the most important superalloys, and it is mainly used in the aerospace field on account of its high mechanical strength, good resistance to fatigue and creep, good corrosion resistance and ability to operate continuously at elevated temperatures. In this work the resistance to pitting corrosion o…
This paper presents the results of oxidation of zinc concentrates containing various iron compounds. Using the thermogravimetry and thermal analysis methods it was shown that the influence of the iron form affects the thermal oxidation process. They influence the rate of, oxidation of zinc sulphide and consequently th…
In paper the selection of the composition and determination of main properties of novel moulding sand was described. The mail goal was to create moulding sand characterized by high thermal insulating properties in relations with low specific weight. This type of moulding sand will find application in thin walled casti…
The paper presents the results of investigations of a multicomponent third-generation aluminium alloy, classified as AA2099. The actual forging conditions were determined basing on the assessment of the quality of side surface of specimens subjected to compression in Gleeble 3800 simulator and on flow curves of the al…
The technology currently used for the fabrication of toothed wheels, gear couplings and chain drums involves the induction hardening process or hardening and tempering after carburising. All these processes take a long time and cause adverse changes in the dimensions and surface quality of products, requiring post-tre…
This paper assesses the effect of various values of detonation velocity on the quality of the bond zone, and thus the properties of bimetal zirconium (Zr 700) - steel (P355NL). The research was carried out for as-bonded welds, i.e. immediately following explosion welding. The results of shearing, peeling and tensile t…
Fe-C-V alloys with high vanadium content are included in the family of white cast irons, because all carbon present in this material is bound into vanadium carbides.
The work concerns the studies on non-metallic inclusions occuring in laser-welded Si-Al TRIP steel containing Nb and Ti microadditions. Laser welding tests of 2 mm thick thermomechanically rolled sheets were carried out using keyhole welding and a solid-state laser. The results of laser welding in the air atmosphere f…
The simple method of determining thermal diffusivity of solid materials at room temperature using the pulsed infrared thermography (IRT) is proposed. The theoretical basis of the method and experimental results are presented. The study was conducted on austenitic steel 316L. Theobtained results show that the thermal d…
The author coordinated the research in Poland by the collaboration with civil and military scientific and research centres. In result they elaborated detonation process of spraying coats designed and constructed stands equipped with detonative devices, they also elaborated the techniques of basic coating parameter mea…
The Haynes® 718 Ni-base superalloy has been investigated by use of modern material characterization, metallographic and heat treatment equipment. Grain growth annealing experiments at temperatures in the range of 1050 – 1200 oC (1323–1473K) for time durations in the range of 20 min-22h have been conducted. The kinetic…
In this article, an attempt was made to determine the effect of dynamic load on the austempered ductile iron resistance obtained under different conditions of heat treatment. Tests were carried out on six types of cylindrical ductile iron samples austempered at 320, 370 and 400oC for 30 and 180 minutes. For each type…
The aim of this work was to investigate the development of microstructure and variations in chemical composition in commercial Inconel 625 coatings on a ferritic-pearlitic steel overlaid by the CMT method.
Microstructural changes in the age-hardenable Fe-28wt.%Mn-9wt.%Al-1wt.%C steel during ageing at 550°C for various times have been investigated by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The steel was produced in an induction furnace and the ingot, after homogenization at 1150°C for 3 hours…
Currently, vegetable oils have been studied as biolubricants in order to reach new environmental standards. Besides being non-renewable, mineral oils from petroleum bring consequences to the environment due to its low biodegradability. Thus, the aim of this work is to develop a biolubricant and to add oxide nanopartic…
The aim of this study is to propose a theoretical frame that is able to lead someone to an appropriate way of modeling cementbased material extrusion. It clearly appears that different extrusion scenarios may occur. Cement-based materials are viscoplastic materials that may undergo drainage during an extrusion process…
Friction Stir Welding (FSW) joints of AISI 304 austenitic stainless steel (304 SS) using position controlled mode were investigated in order to understand and relate axial force behavior to welding quality. Joints were produced using two tools and four combinations of specific parameters. The results showed coherence…
During the extraction of aluminum from bauxite, a waste of oxides containing traces of heavy metals in a highly alkaline matrix, called Red Mud (RM), is produced. In this study RM is characterized and the feasibility of using it as a precursor for the production of thin films by Plasma Sputtering and by Plasma Immersi…