Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
We propose and demonstrate a two-color heterodyne interferometric method for making a perfect mosaic of two planar gratings that can substitute for a single and larger grating without introducing wavefront aberration at any wavelength. The lateral and longitudinal phase errors are separated and eliminated by use of tw…
Microstructure evolution and corrosion behaviour of ultrafine-grained copper processed by equal channel angular pressing (route Bc) were studied. The results of TEM investigation of the microstructure evolution are presented along with the measurements of the corrosion potential, the corrosion current density and the…
The paper describes hydrostatic extrusion (HE) as a method of grain refinement of metallic materials down to the nanometric scale. The main features of this method are: (a) large strain, (b) very high strain rates (even greater than 104 s-1), and (c) deformation homogeneity. HE offers also the opportunity of obtaining…
Severe Plastic Deformation (SPD) has proved to be an attractive tool for obtaining ultrafine-grained and nanocrystalline materials in bulk form; free of defects such as pores and impurities.Volume is indexed by Thomson Reuters CPCI-S (WoS).
The ribbons with different thicknesses of Fe83Ga17 alloy were prepared by melt spun. The maximum magnetostriction of −2100ppm has been obtained in the ribbon with the thickness of 75μm. The microstructures of the ribbons were determined by x-ray diffraction. It was found that DO3 structure emerges in those ribbons mel…
Over the past two decades equal channel angular processing (ECAP) and other severe plastic deformation (SPD) processes have been shown, in the laboratory scale, to produce material with promising properties for industrial applications. In particular, ultrafine grain (UFG) metals produced by ECAP process, for example,…
The effect of equal-channel angular pressing (ECAP) on the structure-phase state and superplasticity development was investigated using the 1421 Al-Mg-Li alloy. The physical reasons for the displacement of the temperature range of superplasticity to lower temperatures after ECAP by comparison with the initial state ar…
This paper describes experiments in which high purity copper single crystals of two different orientations were processed for one pass by equal-channel angular pressing (ECAP) and the deformed structures were examined using optical microscopy (OM), orientation imaging microscopy (OIM) and transmission electron microsc…
Specific features of mechanical behaviour of ultra fine grained iron subjected to friction treatment with nitriding (FN) were clarified by comparison with that induced by friction treatment (FT) with air. Mechanical parameters such as Young’s modulus, nanohardness, and plasticity characteristic δA were found to be of…
In the present work we studied microstructure of ultra fine grained (UFG) pure Mg and UFG Mg-based alloys. The initial coarse grained samples were deformed by high pressure torsion (HPT) using pressure of 6 GPa. Such deformation leads to formation of UFG structure in the samples. The severe plastic deformation results…
The cross-ARB (C-ARB) process, which adopts cross rolling of the two stacked plates, has been performed up to seven cycles on a commercial purity 1050 aluminum alloy to obtain ultrafine grains with an average grain size of 0.7μm. Microstructural evolution of the C-ARB processed aluminum alloy was examined by a transmi…
Anisotropy of mechanical properties, fatigue and fracture resistance of precipitation hardened CuCrZr alloy ultrafine (UFG) grained by equal-channel angular pressing (ECAP) is in focus of the present communication. Fracture toughness was estimated in terms of J-integral and the fatigue crack growth rate was quantified…
Diamond has been well recognized a strategic engineering material. It possesses excellent physical and chemical properties including the highest hardness and thermal conductivity, and good resistance to chemical erosion. Although CVD diamond film has good potential outstanding properties, its industrial applications h…
Severe plastic deformation (SPD) in solid metals, with an aim to obtaining ultra-fine grained or even nano-structured materials, attracted great efforts all over the world. This article retrospects to the ancient origin of this technique and presents some aspects of recent research activities in China briefly. SPD app…
The recrystallization behavior and texture development in copper accumulative roll-bonding (ARB) processed by various cycles (2, 4 and 6 cycle) were studied by differential scanning calorimetry (DSC) analysis and SEM/EBSP method. The exothermic peaks caused by recrystallization appeared at 210 ~ 253 in each sample. Th…
This paper studies the effect of combined SPD treatment on microstructure and mechanical properties of semi-products out of CP Ti. The combined processing, consisting of equal-channel angular pressing and further thermomechanical treatment, produced ultrafine-grained rods out of Grade 2 CP Ti with a diameter of 6.5 mm…
The nanostructured TiNi-based shape-memory alloys were synthesized by multi-step SPD deformations – ECAP plus cold rolling or drawing. It is found that the SPD processing changed the morphology of the martensite and temperature of martensite transformation. Also, we found that the mechanical and shape memory propertie…
We report ^{13}C NMR spectra and nuclear spin lattice relaxation rate 1/T_1 for a quasi-one-dimensional quarter-filled organic material (TMTTF)_{2}AsF_{6}, which undergoes charge ordering (T_{{CO}} = 102 K) and spin-Peierls phase transitions (T_{{SP}} = 14 K). The ratio of two 1/T_1 for the charge accepting and donati…
Damascene Cu interconnects show significant differences in both their microstructural and stress behavior as compared to those of Al interconnects patterned using the etching process. Thermal stresses build up during the successive thermal cycles due to the differences in the coefficients of thermal expansion of the c…
This paper investigates microstructures and mechanical properties of the TI-6AL-4V ELI alloy processed by ECAP and extrusion with various morphology of α and β-phase. Preliminary thermal treatment consisted of quenching and further high-temperature ageing. The present work reveals that the decrease of volume fraction…