Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Large-pore TiO2 and ZrO2 mesoporous films with 2D-Hex or cubic mesostructures were prepared by dip-coating. Organic bifunctional molecules presenting an organic function and a complexing grafting group (phosphate, carboxylate) were explored as surface modifiers. The incorporation of these functions into the mesoporous…
Mechanical response and energy dissipation of an array of carbon nanotubes under high-strain rate deformation was studied using a simple drop-ball test with the measurement of the dynamic force between the ball and forest of nanotubes. This convenient process allows extracting force–displacement curves and evaluating…
A synthetic material with large thermoelectric anisotropy has been prepared from a metal–semiconductor multilayer structure. By an alloying process, a multilayer stack A–B–A…, where A and B are pure aluminum and n-silicon, is produced with a thermoelectric anisotropy ΔS=S‖−S⊥≅1.5mV∕K, where S‖ and S⊥ are the absolute…
The hardness of cubic spinel Si3N4 was calculated by using our microscopic model of hardness combined with first principles calculation. The calculated Vickers hardness is only 33.3GPa in good agreement with its experimental values reported recently, indicating that the cubic spinel Si3N4 is not a superhard material.…
Abstract The diblock copolymer poly(methyl methacrylate)‐ b ‐poly(sodium sulfonated glycidyl methacrylate) (PMMA‐ b ‐PSGMA) was end‐attached by its hydrophobic block (PMMA) onto mica hydrophobized by a stearic trimethylammonium iodide (STAI) layer, to form a polyelectrolyte brush immersed in water. With a surface forc…
Abstract High internal phase emulsions (HIPEs) of styrene and divinylbenzene (DVB), with 0–40 % vinylbenzyl chloride (VBC) in the oil phase, were polymerized to give porous polymers (pore volumes 84–92 %), which were sulfonated and carbonized at temperatures up to 700 °C to obtain macroporous carbon monoliths. On carb…
Au-polyimide nanocomposites have been synthesized by implanting different doses of Au+ ions in 100nm thick films of pyromellitic dianhydride-4,4′ oxydianiline polyimide, prepared by glow discharge vapor deposition polymerization. Unambiguous evidence of Au nanoclusters growth is found only at the highest implantation…
Abstract Electrical conductivity and electromagnetic interference (EMI) shielding effectiveness at microwave (200–2000 MHz) and X‐band (8–12 GHz) frequency range of polyaniline (PAni) composites were studied. It has been observed that EMI shielding of conductive polyaniline (PAni)–ethylene vinyl acetate composites inc…
The quantitative determination of the three-dimensional Wulff shape for a metallic crystal-melt system is reported here. The anisotropy of crystal-melt interfacial free energy is experimentally measured for the $\mathrm{Al}--\mathrm{Sn}$ binary system at temperatures of 300 and $500\phantom{\rule{0.2em}{0ex}}\ifmmode^…
A transmission x-ray tube super-miniature in size is described. The x-ray tube is 5mm in diameter, and comprised of a built-in electron-emitter assembly and a grounded planar target. The key component of the emitter assembly is a Kovar pipe 2mm in diameter, inside which carbon nanofibers aligned on an electro-polished…
Abstract In the presence of dicumyl peroxide (DCP), the thermal plasticization of starch and its compatibilizing modification with polyethylene was accomplished by one‐step reactive extrusion in a single‐screw extruder at the same time. Because of the formation of polyethylene‐ graft ‐maleic anhydride (PE‐ g ‐MAH) dur…
The increasing availability of functionalized BEDT-TTF derivatives in both racemic and enantiopure forms opens up great opportunities for preparing multifunctional materials and chiral conducting systems in the form of crystals, thin films and polymers. Functionalities such as amino and carboxyl will allow attachment…
Thin films of SmCo5 with extraordinarily high perpendicular magnetic anisotropy were prepared by introducing a Cu∕Ti dual underlayer and controlling the substrate temperature during the sputter deposition. Under optimized conditions, the magnetic anisotropy constant reached 4.0×107erg∕cm3, and the coercivity and the r…
Abstract The space charge distribution in polyethylene blends under direct current electrical field was measured by a pulsed electro‐acoustic method. It was found that blending LDPE with 0.5 wt% HDPE decreased the amount of accumulated space charges and improved their distribution. Small‐angle light scattering and dif…
Abstract The removal of boron from wastewater has to be considered on a case‐by‐case basis because no boron compound is known to be precipitated quantitatively. Based on an industrial case, many methods were tested for the treatment of wastewater containing 50 g L −1 of sulfuric acid and 0.7 g L −1 of boron, and a wel…
The growth and magnetic properties of epitaxial magnetite ${\mathrm{Fe}}_{3}{\mathrm{O}}_{4}$ on GaAs(100) have been studied by reflection high-energy electron diffraction, x-ray photoelectron spectroscopy, magneto-optical Kerr effect, and x-ray magnetic circular dichroism. The epitaxial ${\mathrm{Fe}}_{3}{\mathrm{O}}…
Three different film systems have been systematically investigated to understand the effects of strain and substrate constraint on the phase transitions of perovskite films. In $\mathrm{Sr}\mathrm{Ti}{\mathrm{O}}_{3}$ films, the phase transition temperature ${T}_{c}$ was determined by monitoring the superlattice peaks…
We have recently reported the growth of freestanding, single-crystal, seamless nanorings of zinc oxide via a spontaneous self-coiling process during the growth of polar-nanobelts [X.Y. Kong et al., Science 303, 1348 (2004)]. The nanoring is made by coaxial and uniradius loop-by-loop winding of a fine ZnO nanobelt. An…
High-permittivity dielectric NiO-based ceramics co-doped with Li and Al (LANO) have been prepared by a traditional solid-state synthesis. Analyses of the ceramic microstructure and composition indicate that Al ions are distributed in grain boundaries, and that uniform boundaries indexed as NiAl2O4 surround the grains.…
The concentration distribution and electronic structure of N atoms doped in multiwalled banboo-like carbon nanotubes (CNTs) are examined by photon energy-dependent x-ray photoelectron spectroscopy and x-ray absorption near edge structure. The inner part of the nanotube wall has a higher N concentration and contains mo…