Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Graphite nanoplatelets (GNPs) were utilized to improve the electrical conductivity of pristine bacterial cellulose (BC) membranes. By physical and chemical methods, flake-shaped GNPs, weaving through the surface layer of web-like cellulose nanofibrils, were indeed fixed or trapped by the adjacent nanofibrils in the BC…
A new vibration beam technique for the fast determination of the dynamic Young modulus is developed. The method is based on measuring the resonant frequency of flexural vibrations of a partially restrained rectangular beam. The strip-shaped specimen fixed at one end to a force sensor and free at the other forms the Eu…
This work reports the covalent attachment of three different calix[4]arenes (calix[4]arene (C4), p-sulfonatocalix[4]arene (C4S), and p-tert-butyl-calix[4]arene (PC4)) to MCM-41, using a three-step modification process. 3-Chloropropyltrimethoxysilane (ClPTS) was first attached to the mesoporous silica surface and subse…
The tensile and shear loading creep parameters of unleaded Sn/3.0Ag/0.5Cu solders are extracted from the proposed tensile and shear creep tests in this work. Four creep loading temperatures, that is, , , , and C, are employed to extract the corresponding parameters. The creep parameters for tensile and shear loading m…
It has been shown repeatedly that many elements present as traces or at low level can affect graphite shape in cast irons. As part of a long term project aimed at clarifying the growth and the alteration of spheroidal graphite, a study on the effect of a few elements (Cu, Sn, Sb, and Ti) on primary graphite growth was…
This work reported the electrostriction of polyurethane (PU) with different aggregations of hard segments (HS) controlled by dissimilar solvents: N,N-dimethylformamide (DMF) and a mixture of dimethyl sulfoxide and acetone denoted as DMSOA. By using atomic force microscopy and differential scanning calorimetry, the PU/…
This work reports on nanoscale and microscale metal oxide gas sensors, consisting of metal-semiconductor-metal barriers designed via scanning probe microscopy. Two distinct metal oxides, molybdenum and titanium oxides, were tested at different temperatures using CO2 and H2 as test gases. Sensitivities down to ppm leve…
The effects of different heat treatment temperatures on the structure and magnetic properties of Nd-Fe-B nanocomposite permanent magnetic alloys with nominal composition of Nd9.4Pr0.6Fe74.5Co6B6Ga0.5Ti1.5C1.5 have been investigated. The most practical method to produce nanostructured metallic materials is rapid solidi…
The purpose of this study is the improvement of the behaviors of walls constructed with masonry bricks using reinforced plaster mortars. In this study, 400×400×100 mm sized walls were constructed using 1 : 2 scaled 100×50×30 mm sized masonry bricks. The walls were plastered using normal and various proportions of poly…
The fluidization characteristics of fine particles have been studied in both the fluidized bed and spouted bed. The effect of different system parameters (viz. static bed height, particle size, particle density and superficial velocity of the fluidizing medium, rotational speed of stirrer, and spout diameter) on the f…
This paper presents results of the research of micronization grinding of dry mica in a planetary ball mill. Investigation was conducted in order to improve the quality and to obtain clearly defined properties and characteristics of mica powder. The micronization grinding of dry mica was performed in four time periods:…
The technology of composite heat treatment is used popularly for low friction and wear resistance of drive elements. A large number of papers about the heat treatment technology had been proposed. Especially, the nitride treatment has been used widely for the purpose of wear resistance and low friction in the industry…
The cure kinetics and mechanisms of a biphenyl type epoxy molding compounds (EMCs) with thermal latency organophosphine accelerators were studied using differential scanning calorimetry (DSC). Although the use of triphenylphosphine-1,4-benzoquinone (TPP-BQ) and triphenylphosphine (TPP) catalysts in biphenyl type EMCs…
Over these past few years, there have been a large number of technical papers published related to the problem of improving the mechanical properties of materials obtained through severe plastic deformation. Nevertheless, the number of technical papers dealing with improvement in the mechanical properties of mechanica…
This paper has applied the constrained viscoelastic layer damping treatments to a cylindrical aluminum shell using layerwise displacement theory. The transverse shear, the normal strains, and the curved geometry are exactly taken into account in the present layerwise shell model, which can depict the zig-zag in-plane…
A frame element model for evaluating the nonlinear response of unstrengthened and FRP-strengthened masonry panels subjected to in-plane vertical and lateral loads is presented. The proposed model, based on some assumptions concerning the constitutive behaviour of masonry and FRP material, considers the panel discretiz…
ZnO:In films with different concentrations (0–5 at.%) are successfully synthesized on quartz substrates using sol-gel technique. The structure, morphology, and optical properties of ZnO:In films are investigated by X-ray diffraction, atomic force microscopy, and UV-visible spectrophotometer. It is found that all the f…
The surface state, electrical, and reliability characteristics of copper (Cu) interconnects after ammonia (NH 3 ) or hydrogen (H 2 ) plasma treatment were investigated in this study. The experimental results show that H 2 plasma treatment has excellent Cu oxide removal efficiency, less impact on the formation of Cu hi…
Recently, the production of skis with wooden cores has increased due to changes in customer awareness concerning ecological issues and rising raw material costs for mineral oil resources. The preparation of ski surfaces is one of the main expense factors in the production of skis. Thus, one perspective of the AMER SPO…