R. H. Dahm、R.J. Latham、B. Ünal 等 5 位作者2003-01-01Transactions of the IMF
SUMMARYThe properties of anodic films produced by anodising aluminium in aqueous solutions of organic acids at room temperature at commercially interesting current densities were investigated with particular emphasis on the wear index, micro hardness, surface roughness and pore structure. Voltage time curves obtained…
Corrosion Behavior and InhibitionConcrete Corrosion and DurabilityAnodic Oxide Films and Nanostructures
G.A. Kleter2003-01-01Amsterdam University Press eBooks
Het laboratorium- en literatuuronderzoek in dit proefschrift betreft de mogelijke effecten van reacties van de organische matrix van dentine op cariës.
Polymer Synthesis and Characterization
Stefanus Harjo、Yoshinobu MOTOHASHI、Naoki Kojima2003-01-01Journal of the Ceramic Society of Japan
Test pieces of a tetragonal zirconia polycrystal containing 3mol% yttria were deformed in tension under superplastic conditions in air to pre-determined nominal strains ranging from 0.0 to 200%. The X-ray diffraction experiments were conducted on surface regions of gauge sections of the deformed test pieces to investi…
Ferroelectric and Piezoelectric MaterialsAdvanced ceramic materials synthesisAdvanced materials and composites
Eva Wagner、Kathryn E. Uhrich、T.E. Twardowski2003-01-01OpenAlex
This paper describes some of the processing issues for extruding salicylic acid-based polymer prodrugs into fibers for medical devices. Polymeric prodrugs, in which a drug is polymerized in a degradable polymer that delivers controlled quantity of the drug to a targeted site in the body as the device degrades, are a n…
Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesAdditive Manufacturing and 3D Printing Technologies
Mikrajuddin Abdullah、Kikuo Okuyama2003-01-01Journal of Engineering and Technological Sciences
Luminescent polymer electrolyte composites composed of silica coated Y 2 O 3 :Eu in polyethylene glycol (PEG) matrix has been produced by initially synthesizing silica coated Y 2 O 3 :Eu and mixing with polyethylene glycol in a lithium salt solution. High luminescence intensity at round 600 nm contributed by electron…
Luminescence Properties of Advanced MaterialsLanthanide and Transition Metal ComplexesPolyoxometalates: Synthesis and Applications
Ado Jório2003-01-01AIP conference proceedings
Dispersive features observed in graphite, carbon nanotube bundles and isolated single‐wall carbon nanotubes are discussed. Special attention is given to the effects of the van Hove singularities in 1D nanotubes.
Carbon Nanotubes in CompositesGraphene research and applicationsFiber-reinforced polymer composites
Yanhai Du2003-01-01ECS Proceedings Volumes
A novel tubular solid oxide fuel cell configuration with high volumetric power packing density is discussed. With good thermal shock resistance, high mechanical strength, easy sealing, and high volume manufacturing ability, tubular SOFC designs offer many advantages over planar designs. One shortcoming is the lower vo…
Electrocatalysts for Energy ConversionAdvancements in Solid Oxide Fuel CellsFuel Cells and Related Materials
Tadashi Hasegawa、Wakana Uchino、Kenji Okazaki2003-01-01MATERIALS TRANSACTIONS
Tensile deformation was carried out for a mechanically milled Al–1.1 mol%Mg–1.2 mol%Cu alloy at temperatures of 523–823 K and a true strain rate of 1×100 s−1. The largest uniform elongation prior to local necking occurred at an intermediate temperature (748 K). This temperature dependence of the uniform elongation was…
Microstructure and mechanical propertiesMagnesium Alloys: Properties and ApplicationsAluminum Alloy Microstructure Properties
Kang An、Jifan Hu、Hongwei Qin 等 8 位作者2003-01-01MATERIALS TRANSACTIONS
In the present paper, the crystalline orientation in melt spun (Nd,Dy)-(Fe,Co)-B ribbons was investigated. The average ribbon thicknesses for Nd15Fe77B8, Nd15Fe75Co2B8 and Nd14DyFe75Co2B8 at V=1 m/s are 300, 380 and 420 μm, respectively. The thickness of (Nd,Dy)-(Fe,Co)-B ribbons decreases with increasing roller speed…
Metallic Glasses and Amorphous AlloysRare-earth and actinide compoundsMagnetic Properties of Alloys
Satoru Inoue2003-01-01Journal of the Ceramic Society of Japan
Two key technologies were reviewed to propose effective approaches to functional glasses. One is combinatorial glass synthesis system. The combinatorial glass synthesis system consists of automatic batch preparation apparatus and two types of automatic apparatuses for melting of glass batches in crucibles. The combina…
Semiconductor materials and devicesNanowire Synthesis and ApplicationsAnodic Oxide Films and Nanostructures
K Nakamura、Shōichi Tomiyoshi2003-01-01Journal of Japan Institute of Light Metals
The phase transformations from the ε- to τ-phases for alloys with the composition of Mn53.6–Al46.4 doped with carbon were investigated using SEM with EDS, optical microscopy and XRD, where the ferromagnetic τ-phase was clearly visualized by suspending a ferromagnetic colloid fluid. When the quenched specimen of the ε-…
Metallic Glasses and Amorphous AlloysShape Memory Alloy TransformationsMagnetic Properties of Alloys
Hiroki Kawabata、Choong-Sik Kim、Teruyoshi Mizutani2003-01-01IEEJ Transactions on Fundamentals and Materials
In order to clarify the mechanisms of partial discharge (PD) and tree degradation, PD characteristics of an artificially-simulated tree channel in low-density polyethylene (LDPE) were investigated. During the application of AC voltage, new tree channels were formed at the tip of the artificial channel. PD characterist…
High voltage insulation and dielectric phenomenaEmbedded Systems and FPGA DesignInternet of Things and Social Network Interactions
Yugo Nakamura、Kazuomi Hirakawa2003-01-01The Quaternary Research (Daiyonki-Kenkyu)
恵庭aテフラ(En-a,17ka BP)の火山ガラス屈折率は,試料採取地点によって異なることがある.その原因は,En-aはフォールユニットごとに火山ガラス屈折率が異なるからである.石狩低地帯南部では,En-aに少なくとも3つのフォールユニットが認められる.火山ガラス屈折率は,上位フォールユニットで高い値(n=1.510-1.514),中~下位フォールユニットで低い値(n=1.505-1.510)を示す.また,単一のフォールユニット内であっても,火山ガラス屈折率は層準によって若干異なる.なお,斜方輝石屈折率については,最下位層準でやや高い値(γ=1.713-1.716)を示すほかは,全層準を通じてほぼ一定の値(γ=1.710-1.7…
Glass properties and applicationsOptical Polarization and Ellipsometry
P. Mataruse、B. Yuknis、B. McDonald 等 6 位作者2003-01-01Molecular Crystals and Liquid Crystals
Octachlorostyrene has been recovered from the reaction tube, along with previously reported hexachlorobenzene, during the synthesis of CrCl 3 from Cr 2 O 3 and CCl 4 at high temperature. The region in the reaction tube where the octachlorostyrene was found, namely upstream from the Cr 2 O 3 held at 890C, suggests that…
Analytical chemistry methods developmentCrystallization and Solubility StudiesX-ray Diffraction in Crystallography
Julio Fernández‐Cestau2003-01-01AIP conference proceedings
Magnetic clusters, such as Fe8 and Mn12, within large organic molecules, behave at low temperature T as large single spins S, that is, as single molecule magnets (SMM’s). In crystals, magnetic anisotropy gives rise to energy barriers U, and quantum tunnelling is then the only available path for magnetic relaxation at…
Magnetism in coordination complexesOrganic and Molecular Conductors ResearchAdvanced NMR Techniques and Applications
R. A. Bartynski2003-01-01AIP conference proceedings
Electron‐electron coincidence techniques have been widely used to study atoms and molecules. In contrast, the application of APECS to solids has been much more limited. Recently, however, APECS has started to progress from a technique that is primarily devoted to analyzing Auger line shapes and making interesting anec…
Advanced Chemical Physics StudiesX-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy Techniques
E. Burattini2003-01-01AIP conference proceedings
Synchrotron Radiation micro X‐Ray Fluorescence (SR μ‐XRF) was applied for the first time to map the trace element content on Multicellular Tumor Spheroids (MTS), i.e. human cell clusters used as an in vitro model for testing micrometastases responses to antitumoral drugs. In particular, immunotoxin molecules composed…
Nanoparticle-Based Drug DeliveryProtein purification and stabilityCancer Research and Treatments
W. Kaszuwara2003-01-01Kompozyty
1/2 (A - stala wymiany, K1 - stala anizotropii) od ich powierzchni. Wklad tych obszarow w sumaryczną wartośc remanencji magnesu rowny jest iloczynowi ich udzialu i namagnesowania nasycenia fazy objetej oddzialywaniami wymiennymi. Zaleznośc remanencji od zawartości pierwiastka ziem rzadkich obliczona wedlug takiego mod…
Magnetic Properties and ApplicationsMagnetic Properties of AlloysAdvancements in Materials Engineering
Yo-ichiro Suzuki、Hirokazu Fukui、Kazuyo Tsuchiya 等 5 位作者2003-01-01Journal of The Electrochemical Society
Using two cationic electropaint resins, the deposition mechanism including the film structure was studied. The resins introduced methyl methacrylate (MMA system) or methyl acrylate (MA system) into a backbone component, and these systems showed different values of the glass transition temperature The MMA resin had a o…
Supercapacitor Materials and FabricationAdvanced Sensor and Energy Harvesting MaterialsAdvanced Cellulose Research Studies
Abdelmalek Douibi、D. Benachour、Fereshteh Mansouri 等 5 位作者2003-01-01International Journal of Polymeric Materials
This work deals with the effect of the addition of a combination of two chemical blowing agents (BA), azobisformamide (ABFA) and/or sodium bicarbonate (SBC), on the processability of rigid polyvinylchloride (PVC) using a Brabender torque rheometer. This technique was previously used under conditions bearing no relatio…
Rheology and Fluid Dynamics StudiesPolymer Foaming and CompositesPolymer Science and PVC