Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
By designing a few-layer boron nitried (BN) buffer layer, topological crystalline insulator Pb(1-x)Sn(x)Se nanoplates are directly grown on SiO2/Si, which shows high compatibility with current Si-based integrated circuit technology. Back-gated field-effect transistors of Pb(1-x)Sn(x)Se nanoplates exhibit a room-temper…
A universal block copolymer pattern transfer method was demonstrated to produce Co nanostructures consisting of arrays of lines or dots from a polystyrene-block-polydimethylsiloxane (PS-b-PDMS) diblock copolymer. Three processes were used: liftoff, a damascene process, and ion beam etching using a hard mask of tungste…
The development of nanocomposite materials with desired heat management properties, including nanowires, layered semiconductor structures, and self-assembled monolayer (SAM) junctions, attracts broad interest. Such materials often involve polymeric/oligomeric components and can feature high or low thermal conductivity…
In this work, the biosensing and antibacterial capabilities of PVA-lysozyme microbubbles have been explored. Gas-filled PVA-lysozyme microbubbles with and without gold nanoparticles in the diameter range of 10 to 250 μm were produced using a single-step pressurized gyration process. Fluorescence microscopy showed the…
The hydroxylation of oxide surfaces driven by molecular H 2 dissociation plays a central role in a wide range of catalytic redox reactions. The high reducibility and oxygen storage capacity of ceria (CeO 2 ) surfaces account for its extensive use as active catalyst support in these redox reactions. By means of ab init…
Abstract The porphyrin boxes (PB‐1 and PB‐2), which are rationally designed porous organic cages with a large cavity using well‐defined and rigid 3‐connected triangular and 4‐connected square shaped building units are reported. PB‐1 has a cavity as large as 1.95 nm in diameter and shows high chemical stability in a br…
Thiolate (RS)-protected gold clusters (Aun(SR)m) have attracted much attention as building blocks of functional nanomaterials. Our group has been studying the high-resolution separation of Aun(SR)m clusters using reversed-phase high-performance liquid chromatography. In this perspective, we summarize our recent result…
A comprehensive microscopic mechanism of doping-induced kinetically constrained crystallization in phase-change materials is provided by investigating structural and dynamical dopant characteristics via ab initio molecular dynamics simulations. The information gained from this study may provide a basis for a fast scre…
Hydrogel fibril and crystal formation are related self-assembly processes that provide materials with distinct emergent properties. The relationship between fibril and crystal growth is poorly understood, and efforts to engineer controlled hydrogelation vs crystallization via small molecule self-assembly currently dep…
ARCIMBOLDO solves the phase problem at resolutions of around 2 Å or better through massive combination of small fragments and density modification. For complex structures, this imposes a need for a powerful grid where calculations can be distributed, but for structures with up to 200 amino acids in the asymmetric unit…
Conductive atomic force microscopy (CAFM) is employed to investigate the current injection from a nanometric contact (a Pt coated tip) to the surface of ${\text{MoS}}_{2}$ thin films. The analysis of local current-voltage characteristics on a large array of tip positions provides high spatial resolution information on…
We apply the Kurland-McGarvey (J. Magn. Reson. 1970, 2, 286) theory for the NMR shielding of paramagnetic molecules, particularly its special case limited to the ground-state multiplet characterized by zero-field splitting (ZFS) interaction of the form S·D·S. The correct formulation for this problem was recently prese…
The exponential growth in the employment of nanomaterials (NMs) has given rise to the field of nanotoxicology; which evaluates the safety of engineered NMs. Initial nanotoxicological studies were limited by a lack of both available materials and accurate biodispersion characterization tools. However, the years that fo…
Although enzyme-like nanomaterials have been extensively investigated over the past decade, most research has focused on the peroxidase-like, catalase-like, or SOD-like activity of these nanomaterials. Identifying nanomaterials having oxidase-like activities has received less attention. In this study, we demonstrate t…
Brønsted acid–base reactions between phosphoric acid (H 3 PO 4 ) and haloanilines in alcohols formed 1:1 proton-transferred ionic salts of (X-anilinium + )(H 2 PO 4 – ) and 2:1 ones of (X-anilinium + ) 2 (HPO 4 2– ) (X = F, Cl, Br, and I at o, m, and p positions of anilinium). Only the former 1:1 single crystals showe…
The mechanical properties of ultra‐high molecular weight polyethylene (UHMWPE) fibers reinforced natural rubber (NR) composites were determined, and the effects of fiber surface treatment and fiber mass fraction on the mechanical properties of the composites were investigated. Chromic acid was used to modify the UHMWP…
Platinum-oxide nanoparticles were prepared through the radio-frequency (RF) discharge sputtering of a Pt electrode in an oxygen atmosphere. The structure, particles size, electronic properties, and surface composition of the RF-sputtered particles were studied by using transmission electron microscopy and X-ray photoe…
The drug-loaded composite electrospun nanofiber has attracted more attention in biomedical field, especially in cancer therapy. In this study, a composite nanofiber was fabricated by electrospinning for cancer treatment. Firstly, the carbon nanotubes (CNTs) were selected as carriers to load the anticancer drug-doxorub…
The recent introduction of transient, bioresorbable electronics into the field of electronic device design offers promise for the areas of medical implants and environmental monitors, where programmed loss of function and environmental resorption are advantageous characteristics. Materials challenges remain, however,…
In the paradigm of materials informatics for accelerated materials discovery, the choice of feature set (i.e. attributes that capture aspects of structure, chemistry and/or bonding) is critical. Ideally, the feature sets should provide a simple physical basis for extracting major structural and chemical trends and fur…