Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Characterization of mesoporous thin films and its implication in applications are presented in this report. It was found that optical, electrical and mechanical properties of mesoporous thin films prepared through surfactant templating are dependent on the film thickness, porosity, pore size and pore structure. A good…
We investigate the localization of a hydrophobic-polar regular copolymer at a selective solvent-solvent interface with emphasis on the impact of block length M on the copolymer behavior. The considerations are based on simple scaling arguments and use the mapping of the problem onto a homopolymer adsorption problem. T…
In this work, polypyrrole (PPy) films were electrodeposited on electrochemically roughened gold substrates modified by argon plasma treatment. First, a gold substrate was roughened by a triangular-wave oxidation-reduction cycle (ORC) in an aqueous solution containing 0.1 N HCl. Then the roughened gold substrate was fu…
L'histoire, les diverses catégories et les caractéristiques et avantages de la catalyse dendritique sont résumés à l'aide de quelques exemples récents tirés des travaux de notre laboratoire. En particulier, les études des divers effets dendritiques nous conduisent à la conclusion selon laquelle les métalloétoiles ou m…
The development of a new in situ probe of metallic character in supported metal clusters utilizing X-ray absorption spectroscopy is described. The technique is based on the extent of screening of the core-hole left in the neutral final state after the X-ray absorption. The technique allows for the clear differentiatio…
The synthesis of protein-based polymers with controlled conformational properties and functional group placement offers many opportunities for the design of advanced materials. In this work, protein engineering methods have been used to produce repetitive alanine-rich protein polymers with the sequence [(AAAQ)(5)(AAAE…
Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for S…
It is well-known from experimental studies that the oxyallyl-substructure-based squarylium and croconium dyes absorb in the NIR region of the spectrum. Recently, another dye has been reported (J. Am. Chem. Soc. 2003, 125, 348) which contains the same basic chromophore, but the absorption is red-shifted by at least 300…
Control of crystallization processes for organic salts is of importance to the pharmaceutical industry as many active pharmaceutical materials are marketed as salts. In this study, a method for estimating the solubility product of a salt of a weak acid and weak base from measured pH-solubility data is described for th…
ZnSe hollow nanospheres have been hydrothermally synthesized at 140 °C for 24 h starting from the precursor ZnCl 2 (N 2 H 4 ) 2 and Na 2 SeO 3 by using hydrazine hydrate (N 2 H 4 ·H 2 O) as the reducing agent. The sample was characterized by XRD, ICP-AES, FE-SEM, and TEM. The BET surface area of the obtained ZnSe holl…
One-pot self-assembled hybrid films were synthesized by the cohydrolysis of methyltriethoxysilane and tetraethoxysilane and deposited via dip-coating. The films show a high "defect-free" mesophase organization that extends throughout the film thickness and for domains of a micrometer scale, as shown by scanning transm…
In this report, procedures are discussed for the enrichment of single-walled carbon nanotube (SWNT) types by simple filtration of the functionalized SWNTs through silica gel. This separation uses nanotube sidewall functionalization employing two different strategies. In the first approach, a crude mixture of metallic…
A simple method has been developed for accurately measuring the crystallographic orientation of a single crystal boule, employing a conventional four-circle x-ray diffraction arrangement in the rocking curve mode which relaxes the need for precise instrument and/or reference alignment. By acquiring a total of eight ro…
La2O2S:Eu3+ nanocrystals (NCs) with a mean size of 18 nm are prepared by gel thermolysis. The morphology of the particles is hexagonal. The surface Eu3+ ions are first detected by time-resolved spectra in the 5D0 --> 7F1 region. Because the symmetry of the sites occupied by surface Eu3+ ions is lower, the 5D0 --> 7F1(…
Polarized neutron diffraction has been used to determine the spatial distribution of the magnetization in CoS 2 and its temperature dependence. Although the previously reported ground state moment 0.84 μ B is non-integral, the compound has sometimes been classified as a half metallic ferromagnet. The present results s…
Composite films of a meso-(tetramethylpyridinium)porphyrin (TMPyP) hybrid incorporated in mesoporous silica (MPS) and cast on a methyl viologen (MV2+)/titania nanosheet hybrid were synthesized and a light-induced charge separation between the two could be observed. These composite thin films were able to initiate a on…
The phase diagram of (PbMg 1/3 Nb 2/3 O 3 ) 1− x –(PbTiO 3 ) x (PMN–PT) has been determined to high accuracy over the whole compositional range using birefringence imaging. A steep change has been detected in the thermal hysteresis of phase transitions in the morphotropic phase boundary region at x = 0.295 at the boun…
ZnO tetrapod nanowires were fabricated by evaporation of Zn in a N 2 gas flow. Stimulated emission with a threshold of ∼ 100 μJ cm-2 was observed and the linewidths of individual modes were in the range 0.7-0.9 nm. Time-resolved measurements have been performed at different excitation powers. With an increase of the p…
The structural, magnetic and transport properties of the LaMn1−xCoxO3 system were investigated over a wide temperature range, 10–900 K. Two structural types, depending on x, were detected—orthorhombic Pbnm () and rhombohedral (x>0.6), separated by the bi-phasic sample x = 0.6. At both ends of the LaMn1−xCoxO3 system,…
Synthesis and self-assembly of nanomaterials can be controlled by the properties of soft matter. On one hand, dedicated nanoreactors such as reverse microemulsions or miniemulsions can be designed. On the other hand, direct shape control can be provided by the topology of liquid crystals that confine the reacting medi…