Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Abstract The paper presents the deformation and fracture analysis of coating-substrate systems during spherical indentation. CrN and TiN ceramic coatings with a thickness of 1-5 μm were tested using 10 to 200 μm tip radius spherical indenters. The typical results of indentation tests i.e. force-penetration depth curve…
Dealing with robot calibration the neglection of joint and drive flexibilities limit the achievable positioning accuracy significantly. This problem is addressed in this paper. A two stage procedure is presented where elastic deflections are considered for the calculation of the geometric parameters. In the first stag…
Abstract The mechanical properties and numerical model of ceramic alumina open-cell foam, which is produced by the chemical method of gelcasting with different cell sizes (porosities) are presented. Geometric characteristics of real foam samples were estimated from tomographic and scanning electron microscopy images.…
This paper describes the welding technology applied for mixed joints of tubes made of austenitic steels in the X10NiCrAlTi32-21 and X6CrNiMoTi17-12-2 grades. One made a butt joint and a multi-run joint, with the inert gas welding method and a non-consumable electrode. The mechanical properties were tested in the follo…
Abstract The aim of this work was to observe the changes in the magnetomechanical properties of composite materials with different Tb0.3Dy0.7Fe1.9(Terfenol-D) powder particle-size distributions and varying volume fractions in the polyurethane matrix. The results show a direct relationship between the properties and th…
The research material used in the study was the martensitic creep-resistant steel P92 used for the manufacture of pipes being part of power generation units subject to heavy load. The research problem focused on two issues. The first one was to analyze how the plastic deformation cumulated in the material in low-cycle…
Abstract Microstructure and texture development in medium-to-high stacking fault energy face centred cubic metals were investigated in order to examine the role of lattice re-orientation on slip propagation across grain boundaries and to characterize the influence of micro- and macro-scale copper-type shear bands on t…
Abstract Metallographic examinations and mechanical tests were carried out on the ductile iron with additions of Ni, Cu and Mo in as-cast state and after austempering. TTT and CCT diagrams were plotted. The heat treatment was performed in six different variants. Studies included qualitative assessment of the microstru…
This experimental study deals with the flexural behaviors of composite single-lap adhesive joints after impact tests. Increasing impact energies are applied at the center of the composite plates having three different overlap lengths. It is shown that the overlap lengths and impact energy levels affect considerably th…
Spiral coil offers a substantial amount of heat transfer area at a considerably low cost as it does not only have a lower wall resistance but it also achieves a better heat transfer rate in comparison to conventional U-tube arrangement. The general aim of the study is to assess different configurations of spiral coil…
This paper presents the application of artificial neural networks for prediction contact resistance of front metallization for silicon solar cells. The influence of the obtained front electrode features on electrical properties of solar cells was estimated. The front electrode of photovoltaic cells was deposited using…
The article presents the results of residual stress analysis in selected metal-metal joints manufactured by conventional welding and explosive merging. The X-ray diffraction technique applied for advanced stress-texture measurements and data processing revealed directions and values of the principal stresses and their…
This work presents the results of diffraction analyses carried out using X-ray phase analyses (XRD and GIXRD) of nitrided layers of X2CrNiMo17-12-2 austenitic steel. Plasma nitriding process was c arried out in the temperature range of 325 ÷ 400 °C and time of 2 ÷ 4 h. Hydrogen-nitrogen plasma was used as reactive atm…
The paper presents the analysis of the load of lower limbs of occupants in the armoured military vehicle, which has been destroyed by detonation of the Improvised Explosive Device (IED) charge under the vehicle. A simplified model of the human lower limb focused on upper ankle joint was developed in order to determine…
Abstract At temperatures below 5°C, the ductility of ZnCuTi alloy sheets is observed to suffer a drastic drop in direction transverse to the rolling direction. Studies have shown that the critical temperature at which this phenomenon occurs is strongly dependent on the alloy structure and parameters of the sheet metal…
The paper presents a method for determining forming limit curves based on a combination of experiments with finite element analysis. In the experiment a set of 6 samples with different geometries underwent plastic deformation in stretch forming till the appearance of fracture. The heights of the stamped parts at fract…
Abstract An aim of this work was to determine an influence of an admixture, the chromium (for x from 0.01 to 0.06), on the mechanical properties of the PFN ceramics. The ceramics with chemical composition Pb(Fe0.5−xCrxNb0.5)O3 was synthesized in two steps from simple oxides PbO, Fe2O3, Nb2O5, Cr2O3. The first stage wa…
The aim of the presented paper was to describe the wear mechanisms operating at the small length scale in multilayer coatings subjected to a mechanical testing. A hybrid PLD system (Pulsed Laser Deposition connected with magnetron sputtering) was used for the multi-layer coating deposition. Coatings were subjected to…
Laser surface texturing is used more and more often in modern machines for the implementation of variety of purposes such as for example intensification of lubrication, intensification of heat exchange, stimulation of microfluidics, increasing the chemical activity of the surface. Owing to the development of technolog…
Abstract The microstructure of an unmodified AlSi9Mg alloy comprises large primary α phase dendrites, eutectic β phase crystals and eutectic α phase. This composition is responsible for the alloy’s low strength parameters, and it limits the extent of practical applications. The mechanical properties of hypoeutectic si…