Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
This paper presents an experimental research on mechanical properties of recycled aggregate concrete (RAC) at low and high water/binder (W/B) ratios. Concrete at two W/B ratios (0.255 and 0.586) was broken into recycled concrete aggregates (RCA). A type of thermal treatment was employed to remove mortar attached to RC…
This paper presents an experimental study of behaviour of high-strength concrete at high temperature. Reduction of the mechanical properties of concrete was determined starting from the period when the concrete specimens were heated to the maximum temperature and cooled down to ambient temperature and the additional 9…
Damage caused by erosion has been reported in several industries for a wide range of situations. In the present work, a new method is presented to improve the erosion resistance of machine components by biomimetic method. A numerical investigation of solid particle erosion in the standard and biomimetic configuration…
The tube numerical control (NC) bending process is a much complex physical process with multifactors coupling interactive effects. The mandrel is the key to improve forming quality and to enhance forming limit. In this study, based on the platform of ABAQUS/Explicit, a 3D elastic-plastic finite element model of NC ben…
Shape memory alloys are a kind of active materials, which have significant characteristics in comparison with other alloys. Since these materials are applicable in different fields such as aerospace, automobile industry, medicine, and dentistry, the effects of wire electrodischarge machining on the properties of these…
DC power and RF power were introduced into the magnetic controlled sputtering system simultaneously to deposit AZO films in order to get an acceptable deposition rate with high quality transparency conducting thin film. The resistivity decreases with the RF power for the as-deposited samples. The resistivity of 6 × 10…
An auxetic polyurethane (PU) scaffold was prepared to investigate chondrocyte proliferation under compressive stimulation for cartilage regeneration. To give a negative Poisson’s ratio to the PU scaffold, volumetric compression with a 3 : 1 ratio was applied during heat treatment. For the control PU scaffold, the Pois…
A new posttensioned T-stub connection (PTTC) for earthquake resistant steel moment resisting frames (MRFs) is introduced. The proposed connection consists of high strength posttensioned (PT) strands and bolted T-stubs. The post-tensioning strands run through the column and are anchored against the flange of the exteri…
Film cooling technology is developed to enhance the temperature resistant of nickel-base single crystal alloy blade. The shape, dimension, and arrangement of cooling holes impact the blade strength and life grievously. In this paper, the influences of holes arrangement on creep characteristic of cooling holes in the p…
Macrofiber composite (MFC) has been developed recently as a new type of smart material for piezoelectric transducers. It shows advantages over traditional piezoelectric ceramic materials (PZT) including the method of application, sensitivity, and cost. It can be embedded on the structure, which provides the possibilit…
Charge-trapping devices using multilayered dielectrics were studied for nonvolatile memory applications. The device structure is Al/Y2O3/Ta2O5/SiO2/Si (MYTOS). The MYTOS field effect transistors were fabricated using Ta2O5 as the charge storage layer and Y2O3 as the blocking layer. The electrical characteristics of me…
Functionalized and raw multiwall carbon nanotubes (MWCNTs) were investigated colloid-chemically in order to study the role of polar versus nonpolar interaction with a polyurethane (PU) matrix. Both kinds of MWCNTs were dispersed by ultrasonication in the presence of a surfactant (sodium dodecyl sulphate) in aqueous so…
Aerogels are highly porous structures prepared via a sol-gel process and supercritical drying technology. Among the classes of aerogels, silica aerogel exhibits the most remarkable physical properties, possessing lower density, thermal conductivity, refractive index, and dielectric constant than any solids. Its acoust…
Undoped and aluminum doped zinc oxide (AZO) thin films were deposited on glass substrates by successive ion layer adsorption and reaction (SILAR) technique from ammonium zincate complex. The thin films are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) for their structural and morpholo…
A centrifugal microfluidic system has been developed in this study, enabling the control and measurement of the burst frequency in order to manipulate the liquid. The radial microfluid chips with different microchannel dimensions were designed for simulation analyses and experimental verifications. The microfluidic fl…
Today, virgin polymer modified asphalt mixes are comparatively more expensive for road pavement. One way to reduce the expense of such construction and to make it more convenient is the application of inexpensive polymer, such as waste polymer. The primary aim of this study was to investigate the effect of adding wast…
The length change is negligible and can be attributed to the normal distension of concrete. On the other hand, concrete suffering from mass loss gives a good indicator about the durability of SCC. Permeability of concrete is an important factor in classifying its durability generally; concrete with low Permeability wi…
The compression behavior of synthetic magnesium- (Mg-) yttrium (Y) garnet Mg3Y2(SiO4)3 has been investigated upto about 8.79 GPa at 300 K using in situ angle-dispersive X-ray diffraction and a diamond anvil cell at the beamline X17C, National Synchrotron Light Source, Brookhaven National Laboratory. No phase transitio…