Angela Digennaro、Helma Wennemers、Gururaj Joshi 等 6 位作者2013-01-01Chemical Communications
Oligothiophene-proline hybrids were synthesized via click-reaction showing intriguing self-assembly behavior in an aqueous environment by forming chiral superstructures, whose helicity is controlled by the configuration of the amino acid moiety.
Supramolecular Self-Assembly in MaterialsPhotochromic and Fluorescence ChemistryPolydiacetylene-based materials and applications
Abdel-Hady Kashyout、Hesham M. A. Soliman、Marwa Nabil 等 4 位作者2013-01-01Materials Sciences and Applications
The fabrication of nano porous silicon, nPSi, using alkali etching process has been studied and carried out. The surface chemistry of anisotropic etching of n-type Si-wafer is reviewed and the anisotropic chemical etching of silicon in alkaline solution using wetting agents is discussed. Transformation of crystallogra…
Thin-Film Transistor TechnologiesSilicon Nanostructures and PhotoluminescenceNanowire Synthesis and Applications
Jing Song、Dominik Jańczewski、Yuanyuan Guo 等 5 位作者2013-01-01Nanoscale
Redox responsive nanotubes were fabricated by the template assisted layer-by-layer (LbL) assembly method and employed as platforms for molecular payload release. Positively and negatively charged organometallic poly(ferrocenylsilane)s (PFS) were used to construct the nanotubes, in combination with other polyions. Duri…
Conducting polymers and applicationsPolymer Surface Interaction StudiesAnodic Oxide Films and Nanostructures
Yizhong Shen、Shaopu Liu、Jian Wang 等 6 位作者2013-01-01Analytical Methods
A sensitive and simple method for the determination of chelerythrine (CHE) was developed based on the fluorescence quenching effect of CHE for glutathione (GSH)-capped CdTe/CdS quantum dots (QDs). Under optimum conditions, a good linear relationship was obtained from 0.073 to 24.0 μg mL−1 with a correlation coefficien…
Advanced biosensing and bioanalysis techniquesQuantum Dots Synthesis And PropertiesPregnancy and Medication Impact
Nobuaki Kawai、Kenji Tsurui、K. Moriguchi 等 5 位作者2013-01-01Procedia Engineering
Hypervelocity-impact experiments are performed on SiO2 glass plates to investigate its damage process. The damage propagation behavior induced by a hypervelocity impact is observed using a high-speed video camera. The postmortem observations reveal that the damage structure of the impacted plates consists mainly of cr…
High-Velocity Impact and Material BehaviorTraumatic Ocular and Foreign Body InjuriesStructural Response to Dynamic Loads
Kohsuke Mori、Takuya Yamaguchi、Shohei Ikurumi 等 4 位作者2013-01-01Chemical Communications
As-synthesized Pd/MCM-41 and Au/MCM-41 including the residual SDA organic templates, cetyltrimethylammonium bromide (CTABr), within the mesoporous channels exhibit superior catalytic activities than the conventionally calcined ones without templates, owing to the stabilizing effect of metal nanoparticles, concentratio…
Catalytic Processes in Materials ScienceMesoporous Materials and CatalysisCatalysis and Hydrodesulfurization Studies
Koen Schouteden、Y. J. Zeng、Koen Lauwaet 等 9 位作者2013-01-01Nanoscale
Nanometer sized ZnO clusters are produced in the gas phase and subsequently deposited on clean Au(111) surfaces under ultra-high vacuum conditions. The zinc blende atomic structure of the approximately spherical ZnO clusters is resolved by high resolution scanning transmission electron microscopy. The large band gap a…
ZnO doping and propertiesCopper-based nanomaterials and applicationsElectronic and Structural Properties of Oxides
Xiaoji Li、F. Gui、Hongbo Cong 等 5 位作者2013-01-01Journal of The Electrochemical Society
Plateau, China-using Deep Crossing LSTM Age network Xueting
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
Cheng Wang、Jian Liang、Xin Deng 等 12 位作者2013-01-01Journal of Nanoscience and Nanotechnology
In this paper, we successfully synthesized amino-terminated poly(ethylene glycol)-block-poly (epsilon-caprolactone) (NH2-PEG-PCL) block copolymer from polyethylene glycol 2000, epsilon-caprolactone (epsilon-CL) and hydrazine hydrate. The obtained copolymer was characterized by nuclear magnetic resonance (1H-NMR), the…
Nanoparticle-Based Drug DeliveryAdvanced Polymer Synthesis and CharacterizationDendrimers and Hyperbranched Polymers
Zhihang Peng、Fengkang Huang、Qiang Chen 等 7 位作者2013-01-01Ferroelectrics
Aurivillius phase (Li,Ce) doped CaBi4Ti4O15 (CBT) ceramics were prepared using the conventional solid state methods. The crystal structure and microstructure were determined by X-ray diffraction and scanning electron microscopy. It was found that the (Li,Ce) ions diffused into the A site of CBT's pseudo-perovskite str…
Ferroelectric and Piezoelectric MaterialsMultiferroics and related materialsMicrowave Dielectric Ceramics Synthesis
Zhang-Yong Huang、Yanhui Chen、Jianhua Tang 等 4 位作者2013-01-01Polymer-Plastics Technology and Engineering
The hierarchic structure of short glass fiber reinforced isotactic polypropylene (GF/iPP) composites with β-nucleating agent were investigated by wide-angle X-ray diffraction, differential scanning calorimetry, polarized light microscopy and scanning electronic microscopy measurements. It was found that the content of…
Polymer crystallization and propertiesNatural Fiber Reinforced CompositesFiber-reinforced polymer composites
Bo-Shiuan Li2013-01-01Scholar Commons (University of South Carolina)
Ceramic materials such as silicon carbide (SiC) are promising candidate materials for nuclear fuel cladding and are of interest as part of a potential accident tolerant fuel design due to its high temperature strength, dimensional stability under irradiation, corrosion resistance, and lower neutron absorption cross-se…
Nuclear Materials and PropertiesAdvanced materials and compositesThermal and Kinetic Analysis
J. M. Koli、Subrata Basu、Nagalakshmi Kannuchamy 等 4 位作者2013-01-01Fishery Technology
Abstract Owing to socio-cultural and safety concerns, fishgelatin is considered to be a potential alternative tomammalian gelatin. The purpose of the currentstudy was to investigate how functional propertiesof fish gelatin are influenced at different environ-mental conditions such as pH and NaCl concentra-tions. The f…
Meat and Animal Product QualityProtein Hydrolysis and Bioactive PeptidesCollagen: Extraction and Characterization
Giuliano Degrassi、Iris Bertani、Giulia Devescovi 等 6 位作者2013-01-01DOAJ (DOAJ: Directory of Open Access Journals)
The aim of this study was to evaluate the possibility of using some models developed to study the plant-bacteria interaction mechanisms for the assessment of the impact of chronic exposure to nanoparticles. Rice-associated bacteria showed that some models are sensitive to the presence of NPs and allow a quantification…
Nanoparticles: synthesis and applicationsHeavy metals in environment
Magnus Rhode、F. Hemberger、Thomas Bauer 等 12 位作者2013-01-01elib (German Aerospace Center)
The results of an inter laboratory comparison of thermal diffusivity measurements on two different materials, namely a copper alloy (CuCrZr) and a polymer (PMMA), are presented here. Both materials were selected with respect to their different thermal conductivity, since the copper alloy belongs to the family of good…
Advanced ceramic materials synthesisThermal properties of materialsThermodynamic and Structural Properties of Metals and Alloys
Lyta、Mitsutoshi Ueda、Kenichi Kawamura 等 5 位作者2013-01-01MATERIALS TRANSACTIONS
Novel austenitic steel of which composition is Fe–20Cr–30Ni–2Nb (at%) is one of the promising material for further advanced steam power plants, which will be operated at 973 K or higher temperature such as 1073 K. This steel is strengthened by intermetallic compounds and has creep rupture strength 80 MPa at 973 K for…
High-Temperature Coating BehaviorsHigh Temperature Alloys and CreepNuclear Materials and Properties
Hongwei Zhang、Keiji Nakajima、Charles-Andr^|^eacute; Gandin 等 4 位作者2013-01-01ISIJ International
In Fe–C–V–W–Cr–Mo high speed steels, the nature of carbides during the solidification are discussed as a function of C, V and W content by the help of Partial Equilibrium (PE) approximation and thermodynamic calculations. The results show that the solidification path and carbide precipitation can be reasonably predict…
Microstructure and Mechanical Properties of SteelsAdvanced materials and compositesMetal Alloys Wear and Properties
Liang Wang、J. Fang2013-01-01Central European Journal of Energetic Materials
The emulsion explosive is one of the important industrial explosives. The structural stability of the water-in-oil (W/O) emulsion matrix of an emulsion explosive determines the reliability of its initiation, safety and detonation performance. It is known that the emulsifier is one of the most important factors affecti…
Polymer crystallization and propertiesEnergetic Materials and CombustionRheology and Fluid Dynamics Studies
Atsushi Hamaya、Toshiaki Horiuchi、Yuki Oohira 等 6 位作者2013-01-01MATERIALS TRANSACTIONS
Three Mg–Zn–Y ternary alloys in the vicinity of X, W and H phases were prepared and were isothermally heat treated at 833, 793, 723 and 673 K to attain thermodynamic equilibrium. The microstructure was observed using electron probe microanalysis and transmission electron microscopy, and the chemical compositions of th…
Magnesium Alloys: Properties and ApplicationsAluminum Alloys Composites PropertiesMetallurgical and Alloy Processes
Aliakbar Roodbari、Kazem Naddafi、Allahbakhsh Javid2013-01-01Environment Protection Engineering
Exposure to bioaerosols at various stages of waste management system (collection, transfer and disposal) has been evaluated by recording of the bacterial and fungal concentrations in the air around these facilities. Regardless of the season, the total bacteria and total fungi were detected for all samples, whereas the…
Mining and Gasification TechnologiesMechanical and Thermal Properties AnalysisGraphite, nuclear technology, radiation studies