Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
(1987). The Insertion of ‘Twist’ into Yarns by Means of Air-jets. Part II: Twist Distribution and Twist-insertion Rates in Air-jet Twisting. The Journal of The Textile Institute: Vol. 78, No. 3, pp. 204-219.
Adhesive behaviors of porcelain, quartz and alumina were investigated using a silane coupling agent and ferric chloride together with 4-META/MMA-TBB resin. Using 4-META/MMA-TBB resin, porcelain pretreated with silane and ferric chloride showed bond strength above 20MPa after 2, 000 thermal cycles. Silane primed quartz…
An additive effect on the pressureless sintering of boron carbide is investigated. Some additive species, Al, TiB2, and AlF3 show a remarkable densification effect upon B4C. The Al-addition provides the best sintered body with the highest bulk density of 95% by means of the firing condition of 2200°C for 30min under A…
The uncertainties in the refined parameters for a 1.5-A X-ray structure of carbon-monoxy (FeII) myoglobin are estimated by combining energy minimization with least-squares refinement against the X-ray data. The energy minimizations, done without reference to the X-ray data, provide perturbed structures which are used…
Abstract Recent point defect formation and defect diffusion data in magnetite are used to analyze tracer diffusion data of Fe, Co, Cr and Al for motion enthalpies in vacancy and interstitial(cy) mechanisms. Correlations are made with ion properties such as radius, polarizability, and bond strength. The best correlatio…
The conductivity of rapidly quenched glassy flakes in the system Li4SiO4-Li3BO3 was measured. A maximum conductivity was observed at a composition near 50-60mol% Li3BO3; this behavior can be called the “mixed anion effect”. The enhancement of conductivity was shown to be related to the decrease in the activation energ…
The diffusion coefficient of hydrogen in iron with various interstitial impurity (C, N) contents has been measured at 298 K by an electrochemical permeation method. The diffusivity of hydrogen is significantly reduced by cold-working. In commercially pure iron specimens (high C, N specimens), the diffusivity of hydrog…
The synthesis of tetrameric and hexameric porphyin dericatives is reported; these species can act as models of multi-tetrapyrrole aggregates in biological systems.
For the first time, expressions are presented which enable us to calculate the reorientation of the nematic director under the influence of an applied voltage of any magnitude. The mathematical techniques developed are extended to study the capacitance of a nematic layer under any magnitude of applied voltage. The cal…
The crystal structures of three six-co-ordinate iron(III) complexes; [Fe(saltrien)] Br·2H2O (low-spin)(1), [Fe(saitrien)]BPh4(spin-crossover)(2), and [Fe(saitrien)]PF6(spin-crossover)(3) have been determined by X-ray analysis at 293 K, where H2, saitrien denotes the Schiff base derived from salicyiaidehyde and triethy…
The form of ferroelectric smectic C* electrooptical response vs the layer thickness and the angle β between the polarizer and analyser is investigated. The criterion of the smectic C*-switching rate is propozed and the method for the rotational viscosity measurements is developed.
Affinement de la structure des composes non stœchiometriques Ca 12−x Al 14 O 33−x jusqu'a 10,53% pour Ca 11,3 Al 14 O 32,3 . Affinement de la structure de CaClO(D 0,88 H 0,12 ) jusqu'a 19,6%, valeur elevee a cause de la presence de l'impurete H
Recent examinations of cold-worked Zircaloy-2 and cold-worked Zr-2.5Nb pressure tubes from CANDU-PHW reactors have extended the corrosion and deuteriding data for these materials up to 5600 effective full power days (efpd), the longest published exposure for these materials in reactor. The examinations have demonstrat…
Sufficient evaluation of the changes in mechanical properties, such as elastic, plastic, and failure properties, due to neutron irradiation in service is required to precisely predict fuel performance. This paper presents the results of the uniaxial tensile tests performed for recrystallized (850 K, 2.5 h) Zircaloy-2…
We have made a computer simulation of the target current density in our single-lens focused ion beam column. This column images at unity magnification the virtual source of a liquid metal ion source. We simulate the nonlaminar properties of the emitted ions with a two-dimensional function f (r,r′) that represents the…
The origin of surface stress on metals is discussed. Self-consistent pseudo-potential calculations of the surface stress tensor at the aluminium [111] and [110] surfaces are reported. In both cases the stress is tensile, favouring contraction in the plane of the surface. The results for aluminium are compared with tho…
A series of single-face hindered porphyrins has been synthesized from 5,10,15,20-tetrakis-(o-aminophenyl)porphyrin having one ‘handle’ and two pivaloyl ‘pickets’ as substituents in order both to vary the cavity size and to hold the handle in a central position. They have been characterized from the analysis of the 1H…
Temperature-dependent angle-resolved photoemission spectra have been obtained from Cu(001) for normal-emission conditions corresponding to direct transitions originating from various points along the \ensuremath{\Gamma}--\ensuremath{\Delta}--X line. Photon energies were varied from 40 to 106 eV, and specimen temperatu…
This paper summarizes the results from over 300 fracture toughness tests on compact specimens taken from zirconium alloy pressure tubing, primarily Zircaloy-2 and cold-worked Zr-2.5Nb. Test conditions include temperatures from 20 to 300°C, varying hydrogen concentrations and hydride orientations, irradiation at severa…
Increased transformer winding losses are an important consideration in determining the overall impact of harmonic currents in a power system. Frequently, losses due to harmonic currents are assumed to vary with the square of frequency. The purpose of this paper is to compare winding loss calculations from a finite ele…