Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Yarn torque is one of the most important indexes of yarn quality, which is determined on the mechanical state of the constituent fibers and their configuration in the yarn. The fiber tension within a yarn was proposed to be the most influential factor governing the magnitude of yarn torque by Bennett and Postle. There…
Abstract In this article, we analyzed the influence of isosorbide content on glass transition temperature and crystallinity of poly( L ‐lactide). Different synthesis methods were applied to determine optimal procedure for polymerization of L ‐lactide in the presence of isosorbide. Two procedures were performed with ti…
It was found that the interface tension between water and alkenyl succinic anhydride (ASA) was significantly reduced by polyaluminum sulfate (PAS), increased considerably though by TiO2 nanoparticle. PAS with basicity of 0.75 (PAS-0.75) reduced the interface tension to a larger extent than PAS with basicity of 0.3 (PA…
The effect of distributor and channel positions on flow uniformity in a high-throughput reactor is studied using a COMSOL MULTIPHYSICS, CFD package. The best design is subsequently fabricated and evaluated for propane total oxidation reaction at low conversions. Comparison of our design with a literature design is als…
Sodium alanate (NaAlH 4 ) is a prototype system for storage of hydrogen in chemical form. However, a key experimental finding, that early transition metals (TMs) like Ti, Zr, and Sc are good catalysts for hydrogen release (and reuptake) whereas traditional hydrogenation catalysts like Pd and Pt are poor catalysts for…
Abstract New class of photo and electrically switchable azobenzene containing pendant bent‐core liquid crystalline monomers ( AZBM 1, 2 , and 3 ) and their polymers ( AZBP 1, 2 , and 3 ) are reported. The synthesized precursors, monomers, and polymers were characterized by FT‐IR, 1 H, and 13 C NMR spectroscopy. Therma…
Abstract A cationic polyelectrolyte, poly (diallyldimethylammoniumchloride) (PDADMAC) and a smectite‐type layered silicate (sodium activated montmorillonite clay (Sodium‐Montmorillonite, NaMt)), intercalated composites (PDADMAC/NaMt) were prepared. Basal spacings (d001) of NaMt in composites were measured by X‐Ray dif…
Abstract The objective of this study is to increase mechanical, thermal, and electrical properties of plasticizer free thermoplastic bio polymer, BIOPLAST GS 2189 (BP), a blend of poly lactic acid (PLA) and potato starch. This polymer is highly suitable for sheet molding, film processing; blown film extrusion and inje…
We report the synthesis of transparent, curling, extra large-area non-layered wurtzite-type low-defect-concentration ZnO (010) nanopapers with a maximum area of over 2000 μm2 and 30–60 nm in thickness via an indium-assisted vapor-phase transport (VPT) method. The ZnO nanopapers exhibit an intense ultraviolet emission…
In contrast to semiconductor structures, the experimentally observed plasma resonances in graphene show an asymmetrical and rather broad linewidth. We show that this can be explained by the linear electron energy dispersion in this material and is related to the violation of the generalized Kohn theorem in graphene.
In this study, mullite synthesized from aluminum nitrate hydrate [(Al(NO3)3.9H2O] and silica sol from rice husk was subjected to sintering treatment at temperatures of 900, 1000, 1100, 1200 and 1300 C, and characterized using x-ray diffraction (XRD), followed by Rietveld refinement, and differential thermal analysis…
Abstract Electrically conducting biodegradable polymer composites made of polypyrrole (PPy) nanoparticles embedded in poly( L ‐lactide) (PLLA) or poly(ε‐caprolactone) (PCL) are prepared by chemical oxidative polymerization. They will be used as electrical conductors for fabricating biodegradable passive resonant circu…
Zinc oxide (ZnO) films under in situ hydrogen plasma were deposited via atomic layer deposition (ALD) at an extremely low temperature (100 °C). Diethyl zinc ((C2H5)2Zn) and deionized water were used as the zinc and oxygen source, respectively. The growth rate of the ZnO films decreased to 1.26 and 1.06 Å/cycle due to…
A new type of polyoxomolybdate containing mixed-valence arsenic, [AgAs(III)(2)(As(III)As(V)Mo(4)O(18)(OH)(2))(3)](11-) (1), has been synthesized. Single-crystal X-ray analysis was carried out on (NH(4))(5)(C(2)H(9)N(2))(4.5)H(1.5)[AgAs(III)(2)(As(III)As(V)Mo(4)O(18)(OH)(2))(3)]·14H(2)O (1a) and (NH(4))(11)[AgAs(III)(2…
The model-free (MF) analysis was applied to the fluorescence decays of 32 pyrene-labeled macromolecules to probe their internal dynamics. Depending on whether a pyrene derivative was attached to the chain ends of a linear chain, randomly along a polymer backbone, or at the chain terminals of dendrimers, the MF analysi…
We present a simple and reproducible method for the fabrication of three-dimensional (3D) surface-enhanced Raman scattering (SERS) substrates by controlling wettability. A superhydrophilic SU-8 microstructured surface generated using O2 plasma treatment led to the formation of a monolayer of aggregated Ag nanoparticle…
With the prevalence of air quality issues in our society, the ability to remove toxic gases from air is a necessity. This work addresses the development of biphasic, nanostructured, organoalkoxysilane-grafted, siliceous materials for use in single pass filters of various types for the removal of acidic and basic gases…
An optical quality GaSe:InS single crystal has been grown by modified Bridgman technique using nonstationary temperature distribution for effective melt mixing. The phase composition of the crystal has been verified with XRD and TEM. The chemical composition variation along the crystal has been evaluated with electron…
Au@Ag@Cu trimetallic nanocrystals were prepared using a three-step reduction method. In the first step, decahedral Au core seeds were prepared by reducing HAuCl4·4H2O in diethylene glycol (DEG) under oil-bath heating in the presence of polyvinylpyrrolidone (PVP) as a polymer surfactant. In the second step, Ag shells w…
Novel MoO(2)/C nano/microcomposites were prepared via a bottom-up approach by hydrothermal carbonization of a solution of glucose as a carbon precursor in the presence of polyoxometalates (POMs: phosphomolybdic acid [H(3)PMo(12)O(40)] and ammonium heptamolybdate tetrahydrate [(NH(4))(6)Mo(7)O(24)]·4H(2)O). The structu…