Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 208360 / 215950 页 · 当前展示 4,167,181–4,167,200 / 4,318,993 条匹配结果 · 摘要仅作预览

Field emission from chemical vapor deposition diamond surface with graphitic patches

Jingbiao Cui、J. David Robertson2002-01-01Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena

The field emission properties of a polycrystalline diamond film with hydrogenated and hydrogen free surfaces have been investigated by monitoring both the emission current–voltage curve and emission site density. A very low turn-on field of electron emission was found to be 0.5 V/μm for the hydrogenated surface and 4…

Carbon Nanotubes in CompositesGraphene research and applicationsDiamond and Carbon-based Materials Research

Plasma etching and plasma polymerization coating of carbon fibers. Part 2. Characterization of plasma polymer coated carbon fibers

N. I. Kim、H. M. Kang、Yeongran Hong 等 4 位作者2002-01-01Journal of Adhesion Science and Technology

Unsized AS-4 carbon fibers were subjected to RF plasma etching and/or plasma polymerization coating in order to enhance their adhesion to vinyl ester resin. Ar, N2 and O2 were utilized for plasma etching, and acetylene, butadiene and acrylonitrile were used for plasma polymerization coating. Etching and coating condit…

Graphene research and applicationsSurface Modification and SuperhydrophobicityFiber-reinforced polymer composites

Intermolecular recognition and crystal packing in molybdenum and tungsten coordination polymers as deduced from powder X-ray diffraction data

Malcolm H. Chisholm、Paul Wilson、Patrick M. Woodward2002-01-01Chemical Communications

The molecular conformations and packing of [(tBuCO2)3M2(mu-X)M2(O2CtBu)3], where M = Mo and W, and X = oxalate and perfluoroterephthalate, determined in the solid-state from powder X-ray diffraction analysis, reveal one-dimensional coordination polymers involving pivalate-oxygen to metal interactions (X = perfluoroter…

Metal-Organic Frameworks: Synthesis and ApplicationsChemical Synthesis and CharacterizationX-ray Diffraction in Crystallography

Influence of Electrode Configuration on the Performance of Electrode-Supported Solid Oxide Fuel Cells

B W Chung、Ai‐Quoc Pham、Jeffery J. Haslam 等 4 位作者2002-01-01Journal of The Electrochemical Society

The effect of the cathode-to-anode area ratio on the normalized power density for solid oxide fuel cells was investigated. A geometrically symmetric cell having a screen printed cathode produced a power density of 0.45 W / cm 2 at 800 ° C . However, using a cathode with a geometric area significantly less than that of…

Advancements in Solid Oxide Fuel CellsFuel Cells and Related MaterialsElectronic and Structural Properties of Oxides

Graphite Formation at 1150-1200°C from Hard-carbon Precursors and Magnetite

Hidetaka Konno、Keiko Fujita、H. Habazaki 等 4 位作者2002-01-01TANSO

Graphite crystals were formed from a mixture of poly (vinyl pyrrolidone) (PVP) or polyacrylamide (PAA) pow-der and magnetite powder at 1150-1200°C. The graphite was identified by X ray diffraction and transmission elec-tron microscopy. The carbon yield from PAA at 1200°C was about four times of that from PVP, but PAA…

Advancements in Battery MaterialsFiber-reinforced polymer compositesGraphite, nuclear technology, radiation studies

A Simple Evaluation Method of the Molten Fuel Amount in a Premixing Region of Fuel-Coolant Interactions

Kiyofumi Moriyama、Yu Maruyama、Hideo Nakamura2002-01-01Journal of Nuclear Science and Technology

A simplified method to evaluate the premixing molten core mass is proposed, based on the molten jet breakup length and settling/cooling dynamics of the particles generated from the jet surface. The present method was applied to KROTOS experiments at JRC Ispra with alumina and corium melts, as well as to a prototypic g…

Nuclear reactor physics and engineeringNuclear Materials and PropertiesNuclear Engineering Thermal-Hydraulics

The Development of a Modified Dissolution Method Suitable for Investigating Powder Mixtures

Lance R. Shaw、W.J. Irwin、T. J. Grattan 等 4 位作者2002-01-01Drug Development and Industrial Pharmacy

A novel dissolution method was developed, suitable for powder mixtures, based on the USP basket apparatus. The baskets were modified such that the powder mixtures were retained within the baskets and not dispersed, a potential difficulty that may arise when using conventional USP basket and paddle apparatus. The advan…

Drug Solubulity and Delivery SystemsAnalytical Chemistry and ChromatographyCrystallization and Solubility Studies

Transition Metal Halide Salts of 2-Amino-5-Substituted-Pyridines: Synthesis, Crystal Structure and Magnetic Properties of Two Polymorphs of (5-IAP)2CuCl4[5-IAP = 2-Amino-5-Iodopyridinium]

J. Giantsidis、Călin Galeriu、Christopher P. Landee 等 4 位作者2002-01-01Journal of Coordination Chemistry

The reaction of anhydrous CuCl2 with HCl and 2-amino-5-iodopyridine in 1-propanol resulted in two polymorphs of (5-IAP)2[CuCl4] [5-IAP = 2-amino-5-iodopyridinium], one as red rods (1) and one as orange prisms (2). The two polymorphs have been characterized by single crystal x-ray diffraction and variable temperature m…

Metal-Organic Frameworks: Synthesis and ApplicationsMetal complexes synthesis and propertiesMagnetism in coordination complexes

Preparation and Characterization of Wheat Straw Hemicellulosic Succinates

Run‐Cang Sun、Sun Min、X. F. Sun2002-01-01International Journal of Polymer Analysis and Characterization

Hemicellulosic succinates with a degree of substitution ranging from 0.28 to 1.67 were prepared by modification with succinic anhydride using pyridine as catalyst and N, N-dimethylformamide/lithium chloride system as solvent. Variations in reactant molar ratio from 1:1 to 6:1 and reaction time from 1 to 12 h resulted…

Natural Fiber Reinforced Compositesbiodegradable polymer synthesis and propertiesPolymer Foaming and Composites

Effects of Loading Conditions and Types of Motion on PWR Fuel Rod Cladding Wear

Thierry Joulin、F. M. Gue ́rout、Azhati Lina 等 4 位作者2002-01-015th International Symposium on Fluid Structure Interaction, Aeroelasticity, and Flow Induced Vibration and Noise

The objective of this study was to investigate the effects of types of motion and loading conditions on the wear of Pressurized Water Reactor (PWR) fuel rod cladding made of Zircaloy-4 in contact with a grid support cell. Fretting-wear tests, for various combinations of motion and preload, were conducted at 310°C and…

Nuclear Materials and PropertiesMechanical stress and fatigue analysisMechanical Failure Analysis and Simulation

Search on Multi-Functional Properties of Spin-Crossover System

Norimichi Kojima、Shuji Toyazaki、M Itoi 等 8 位作者2002-01-01Molecular Crystals and Liquid Crystals

We have investigated the spin-crossover behavior for one-dimensional complexes [Fe(trz) 3 (RSO 3 ) 2 (trz= triazole) and two-dimensional mixed-valence complexes (C n H 2n+1 ) 4 N[Fe II Fe III (dto) 3 ](dto=C 2 O 2 S 2 ). For the case of [Fe(4-NH 2 trz) 3 ](RSO 3 ) 2 , we have controlled Tc and the thermal hysteresis w…

Magnetism in coordination complexesLanthanide and Transition Metal ComplexesElectron Spin Resonance Studies

Testing CSC Book Saver®, a Commercial Deacidification Spray

A-L. Dupont、J.-P. Barthez、Heike Jerosch 等 4 位作者2002-01-01Restaurator International Journal for the Preservation of Library and Archival Material

SUMMARIES The effect of the deacidification spray CSC Book Saver ® on a mechanical pulp paper and a pure cellulose paper was tested and the consumption of the magnesium based alkaline reserve over time was simulated by exposing the papers to nitrogen dioxide. Scanning electron microscopy and energy dispersive X-ray an…

Advanced Cellulose Research StudiesLignin and Wood Chemistry

Dependence of Polymorphic Transformation on Anti-Solvent Composition and Crystallization Behavior of Thiazole-Derivative Pharmaceutical.

Mitsutaka Kitamura、Keiichiro Nakamura2002-01-01JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

The transformation and crystallization behaviors of the polymorphs (A and C) and solvated crystals (BH (BPT·0.5H2O) and D (BPT·MeOH)) of the thiazole-derivative pharmaceutical (BPT) were investigated. The solubility of metastable form was measured with the vigorous stirring using a magnetic stirrer. It was found that…

Drug Solubulity and Delivery SystemsAnalytical Chemistry and ChromatographyCrystallization and Solubility Studies

Underlying Principles in Chrome Tanning: Part 1. Conceptual Design of Pickle-less Tanning

Balachandran Unni Nair、Worku Legesse、P. Thanikailevan 等 4 位作者2002-01-01Journal of the American Leather Chemists Association

The do-undo methods adopted in conventional leather processing generate huge amounts of pollutants. In this context pickle-less chrome tanning is becoming crucial to the tanners due to these environmental problems. However, a standard process with optimal pH and other parameters especially the need and the amount of m…

Collagen: Extraction and Characterization

The Etching of Ti Adhesion Layers in H[sub 2]O[sub 2] Solutions

J. E. A. M. van den Meerakker、J. P. Metsemakers、J.B. Giesbers2002-01-01Journal of The Electrochemical Society

The etching of Ti in HF-free solutions was investigated. Kinetic experiments were performed to tailor the etch rate within a range that is technologically interesting for etching thin (≈5 nm) Ti adhesion layers. Electrochemical measurements were used to characterize the etching process; galvanic element formation betw…

Semiconductor materials and devicesCopper Interconnects and ReliabilityAnodic Oxide Films and Nanostructures

Role of Microchemistry and Microstructure on Variability in Corrosion and Deuterium Uptake of Zr-2.5Nb Pressure Tube Material

BD Warr、V. Perović、Lin Yp 等 4 位作者2002-01-01OpenAlex

Understanding the reasons for variability in D uptake in Canadian Deuterium Uranium (CANDU) reactor Zr-2.5Nb pressure tubes (PT)s will lead to improved surveillance and predictive strategies. Results from out-reactor aqueous exposures that suggest PT performance should be predictable based on offcut characteristics an…

Fusion materials and technologiesNuclear Materials and PropertiesTitanium Alloys Microstructure and Properties

Ab initio Study of Elastic Properties of Pb(Ti,Zr)O3

E. Heifets2002-01-01AIP conference proceedings

We studied the elastic constant tensor for Pb(Ti0.5Zr0.5)O3, in the rhombohedral and tetragonal phases. Young’s modulus in the rhombohedral phase is very anisotropic. It has two narrow and large peaks along and perpendicular to polarization direction and is small in all intermediate directions. Tetragonal PZT is soft…

Ferroelectric and Piezoelectric MaterialsAdvanced ceramic materials synthesisMultiferroics and related materials

Singular or Non-Fermi Liquids

C. M. Varma l2002-01-01AIP conference proceedings

An introductory survey of the theoretical ideas and calculations and experimental results which depart from Landau Fermi liquids is presented. The common themes and possible routes to the singularities leading to breakdown of Landau Fermi liquids are categorized following an elementary discussion of the theory. Solubl…

Physics of Superconductivity and MagnetismRare-earth and actinide compoundsIron-based superconductors research

Development of high strength pearlitic steel rail (SP rail) with excellent wear and damage resistance

Hiroyasu Yokoyama、Shinji Mitao、Mineyasu Takemasa2002-01-01OpenAlex

NKK has developed a high-strength pearlitic rail named the SP (Super Pearlite) rail, which has superior wear and damage resistance and is most suitable for heavy haul railroads. Comprehensive research on the relation between microstructural factors and wear and RCF (Rolling Contact Fatigue) behaviors revealed that ref…

Railway Engineering and DynamicsMechanical stress and fatigue analysisMetal Alloys Wear and Properties