Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Microcalorimetric and infrared spectroscopic (FTIR) measurements for the adsorption of ethylene on Pd/SiO 2 and Pd/Sn/SiO 2 catalysts (4 wt % Pd, Pd/Sn = 3) have been performed at temperatures of 300, 263, and 233 K. In addition, microcalorimetric measurements were made for H 2 and CO adsorption and FTIR studies were…
A characteristic feature of the Portevin - Le Chatelier effect or the jerky flow is the stick-slip nature of stress-strain curves which is believed to result from the negative strain rate dependence of the flow stress. The latter is assumed to result from the competition of a few relevant time scales controlling the d…
Optical limiting behaviour of suspensions of single-walled carbon nanotubes in water, ethanol and ethylene glycol is reported. Experiments with 532 nm, 15 nsec duration laser pulses show that optical limiting occurs mainly due to nonlinear scattering. The observed host liquid dependence of optical limiting in differen…
Abstract Defect and Microstructure Analysis by Diffraction is focused on extracting information on the real structure of materials from their diffraction patterns. The primary features of a powder diffraction pattern are determined by the "idealized" periodic nature of the crystal structure. With the advent of compute…
The surface of a silica sample (Spherosil) have been modified by means of chemical treatments with sulfuric, phosphoric, and hydrochloric acids and potassium chloride. A sample also has been heated in a furnace at high temperatures. Changes in the degree of hydroxylation have been qualitatively followed by means of IR…
New particulate bianisotropic composites—the magnetostatically controlled bianisotropic materials (MCBMs)—recently have been conceptualized. It becomes clear, however, that the theoretical questions raised in recent publications may be considered as interesting as such, but not very relevant as long as experimental va…
Shape memory alloys are gaining an increased interest as passive as well as active damping materials. This damping ability when applied in structural elements can lead to a better noise control, improved life time and even better performance of the envisaged tools.
In order to describe the thermomechanical properties in shape memory polymer of polyurethane series, a thermomechanical constitutive model was developed. In order to describe the variation in mechanical properties due to the glass transition, coefficients in the model were expressed by a single exponential function of…
On the basis of group theoretical symmetry criteria, the primary and secondary order parameters (OP's) have been identified for the three ferroelastic martensitic transformations that occur in the Au-Cd binary, and in the Ti-Ni-M (M = Fe, At, Cu) pseudo-binary shape-memory alloys, viz (i) from the cubic β 2 austenite…
Degree of the shape memory effect was measured either by bending, tensile and compression tests in the temperature range 77∼300 K. The yield stress increased substantially by the grain size refinement, yet maintaining a good shape memory effect. In addition to usual mentioned slow strain rate tests ( about 10 -3 s -1…
An effect of aging on shape memory behavior was investigated for Mn - 15 at.% Cu alloy. It was revealed that aging of the alloy at 693 K significantly improves both shape memory effect (SME) and reversible shape memory effect (RSME). The reason of improved SME can be attributed to the decrease in the axial ratio, c/a,…
A new model for solute redistribution in cellular or dendritic growth is presented The mass balance is an integral part of the analysis. A definition of the coefficient of redistribution extent within the solid is formulated on the basis of the description of equilibrium crystal growth. A definition of the coefficient…
Morphology and crystallography of twins in the martensite in Ti-Ni and Ti-Pd shape memory alloys are reviewed on the basis of recent electron microscopy observations. It has been confirmed that there are five and three twinning modes in Ti-Ni and Ti-Pd martensites, respectively. The morphology and crystallography of n…
Shape Memory Alloys (SMAs) have become increasingly attractive as embedded actuators in polymers yielding adaptive composite structures. In particular, SMA-elements have been used to actively or passively control shape, elastic modules, internal stress level and damping capacity of such smart composites. In the passiv…
The effect of Ta addition on the microstructure, phase transformation temperature and mechanical properties of Ni 50 Ti 50-x Ta x alloys have been studied in this paper. Beginning with a base composition of Ti 50 Ni 50 , Ti was substituted by Ta up to 15at%. A DSC, an optical microscope and SEM were used to characteri…
The purpose of this study was to determine the hemolytic potentials of discrete bubble cavitation and attached cavitation. To generate controlled cavitation events, a venturigeometry hydrodynamic device, called a Cavitation Susceptibility Meter (CSM), was constructed. A comparison between the hemolytic potential of di…
The thermal cyclic characteristics under load were investigated in a Ti 50.6 Pd 30 Ni 19.4 alloy. It is shown that the M s temperature, transformation strain and total plastic strain increase with increasing the number of the cycles and the increments increase with an increase of applied stress. All the above changes…
High-resolution electron microscopy study has been made on the trained sample of an Fe-14Mn-6Si-9Cr-5Ni (mass %) alloy in order to know the mechanism of improvement of shape memory effect. High densities of extremely thin hcp martensite plates with uniform distribution are produced by training, which is regarded as th…
High-temperature shape memory effect (HTSME) takes place in different alloys and compounds, such as: TiNi with Pt, Pd, Zr and Hf additions, Zr-based quasibinary intermetallics, NiAl-based, Cu-Al-Mn, Cu-Al-Zn and Fe-Ni-Co-Ti. It can be presumably adopted that all materials exhibit SME higher than 200°C should be consid…
The reason for the strong composition and heat-treatment dependence- of the martensitic transformation temperature was investigated by a simple Landau-type model. Assuming the anharmonic and coupling coefficients are insensitive to composition, we obtained an important result martensitic transformation occurs at a cri…