Joseph Green1994-07-01Journal of Fire Sciences
A brominated phosphate was evaluated as a flame retardant in a polycarbonate and various polycarbonate blends. This flame retardant was found to be significantly more effective than an all-bromine and an all- phosphorus flame retardant, and bromine-phosphorus synergy was demon strated. The synergy is more pronounced w…
Flame retardant materials and propertiesEnvironmental and Industrial Safety
Ralf Schledjewski、J. Karger‐Kocsis1994-07-01Journal of Thermoplastic Composite Materials
DMA spectra were taken from tensile loaded neat and glass-fiber mat- reinforced polypropylene (GMT-PP) with different reinforcement fractions ( V f ). Reliable data were achieved by using rectangular specimens of proper dimension, i.e., having a clamped surface of 60 x 15 mm 2 . It was established that the β- or T g -…
Mechanical Behavior of CompositesPolymer crystallization and propertiesPolymer Nanocomposites and Properties
Peter V. Wright、Tiffany Wong、B. Chambers 等 4 位作者1994-07-01Advanced Materials for Optics and Electronics
Abstract The microwave absorption and reflection characteristics of composites of polypyrrole with paper, cotton cloth and polyester fabrics have been evaluated. Refiectivity measurements in the range 2–18 GHz and plane wave modelling have revealed impedance charateristics with a common transition rgion. Relationships…
Advanced Sensor and Energy Harvesting MaterialsConducting polymers and applicationsElectromagnetic wave absorption materials
Minxu Li、H.F. Dylla1994-07-01Journal of Vacuum Science & Technology A Vacuum Surfaces and Films
The outgassing rate from an electropolished stainless steel (type 304) surface is measured after the surface is exposed to H2O vapor at pressures (p0) of 10−3–10 Torr for exposure periods (t0) of 3–600 min. The system is kept at 310, 350, or 390 K during H2O exposures and subsequent outgassing measurements. Our data s…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
J.M. Makar、D.L. Atherton1994-07-01IEEE Transactions on Magnetics
The results of a study of the effects of constant uniaxial stress on the irreversible and reversible differential permeabilities of minor and saturation major hystersis loops are presented, extending an earlier study which studied those permeability components on the initial magnetization curve. Tension was found to i…
Magnetic properties of thin filmsMicrostructure and Mechanical Properties of SteelsMagnetic Properties and Applications
Wenge Zheng、Zongneng Qi、Fusong Wang1994-07-01Polymer International
Abstract The effect of transesterification on the compatibility of polycarbonate poly(ethylene terephthalate) (PC/PET) blends and the crystallization and melting behaviour of PET was studied. The results show that with increase of the reaction extent, the compatibility of the blends was enhanced during melt‐processing…
Polymer crystallization and propertiesNatural Fiber Reinforced Compositesbiodegradable polymer synthesis and properties
P. A. Schroeder、Ellery D. Ingall1994-07-01Journal of Sedimentary Research
Abstract A new operationally defined method for the measurement of fixed inorganic nitrogen (N fix ) associated with clays has been tested and applied to a sequence of mixed-layer illite/smectite (I/S) (ranging from 40 to 68% illite in I/S) in shales from a drill site in Terrebonne Parish, Louisiana. This new method h…
Groundwater and Isotope GeochemistrySoil and Unsaturated FlowClay minerals and soil interactions
V. S. Tiwari、Dhananjai Pandey1994-07-01Journal of the American Ceramic Society
Ferroelectric phase transition in (Ba,Ca)TiO 3 ceramics has been investigated using dielectric measurements. It is shown that samples prepared using (Ba,Ca)CO 3 , precursors exhibit diffuse phase transition (DPT) while those prepared by the conventional route show BaTiO 3 ‐type sharp transition. The diffuseness of the…
Ferroelectric and Piezoelectric MaterialsMaterial Dynamics and PropertiesComposite Material Mechanics
Richard Giegé、Bernard Lorber、Anne Théobald‐Dietrich1994-07-01Acta Crystallographica Section D Biological Crystallography
This paper gives an overview of the science of crystals of biological macromolecules. The historical background of the field is outlined and the main achievements and open problems are discussed from both biological and physical-chemical viewpoints. Selected results, including data from the authors, illustrate this ov…
Protein Structure and DynamicsPhotosynthetic Processes and MechanismsEnzyme Structure and Function
A. G. Mikhin、Yu.N. Osetsky、V.G. Kapinos1994-07-01Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
Point-defect calculations in h.c.p. zirconium have been carried out with a pair potential constructed in terms of the generalized pseudopotential theory. Two models of the h.c.p. lattice with either the ideal or the experimental c/a ratio were considered. It has been found with both models that the monovacancy has the…
Nuclear reactor physics and engineeringNuclear Materials and PropertiesThermodynamic and Structural Properties of Metals and Alloys
B. K. Gupta、Ajay P. Malshe、Bharat Bhushan 等 4 位作者1994-07-01Journal of Tribology
The role of surface roughness on the coefficient of friction and wear of polished CVD diamond films has been investigated. Diamond films grown on single crystal silicon (001) substrates by Hot Filament Chemical Vapor Deposition (HFCVD) process were polished by a chemomechanical process in which a diamond film was poli…
Metal and Thin Film MechanicsDiamond and Carbon-based Materials ResearchAdvanced Surface Polishing Techniques
Sylvie M. Brouder、K.G. Cassman1994-07-01Soil Science Society of America Journal
Abstract The Cushman‐Barber model was evaluated for K uptake by cotton ( Gossypium hirsutum L.) from vermiculitic soils of high K‐fixation capacity and low solution‐phase K + concentration. On these soils, cotton exhibits late‐season K deficiency while other crop species remain unaffected. Four soil treatments of NH 4…
Soil and Unsaturated FlowPlant nutrient uptake and metabolismClay minerals and soil interactions
G. Simonelli、R.C. Pasianot、E. J. Savino1994-07-01Physical review. B, Condensed matter
An embedded-defect (ED) interatomic potential for Fe is presented. The ED model is based on the same physical description of interactions as the embedded atom method (EAM) but including angular-dependent many-body local terms. In this work, the ED potential is fitted to several Fe properties and is used to simulate th…
Microstructure and mechanical propertiesMicrostructure and Mechanical Properties of SteelsFusion materials and technologies
Arlene K. Darke、Mark R. Walbridge1994-07-01Communications in Soil Science and Plant Analysis
We compared sequential and separate extraction procedures for estimating non‐crystalline and crystalline aluminum (Al) and iron (Fe) in a floodplain forest soil. We used 0.2M acid ammonium oxalate (pH 3.0) to estimate non‐crystalline Al and Fe, dithionite‐citrate‐bicarbonate to estimate crystalline Fe, and 0.1M sodium…
Heavy metals in environmentSoil and Unsaturated FlowClay minerals and soil interactions
Matthias Appel、G. Fleischer、Joerg Kaerger 等 5 位作者1994-07-01Macromolecules
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTAnomalous Segment Diffusion in Polymer MeltsMatthias Appel, Gerald Fleischer, Joerg Kaerger, Franz Fujara, and Inyong ChangCite this: Macromolecules 1994, 27, 15, 4274–4277Publication Date (Print):July 1, 1994Publication History Published online1 May 2002Published inissue 1…
Polymer crystallization and propertiesEnvironmental Impact and Sustainability
Arup Gangopadhyay、W. C. Vassell、M. A. Tamor 等 4 位作者1994-07-01Journal of Tribology
Unlike polycrystalline diamond films, amorphous hydrogenated carbon (AHC) films can be deposited at room temperature, are amorphous in atomic structure, and form very smooth surfaces. Amorphous hydrogenated carbon film consists of very small 10–20 Å sp2 bonded (graphitic) clusters captured in a largely sp3 coordinated…
Metal and Thin Film MechanicsDiamond and Carbon-based Materials ResearchTribology and Wear Analysis
James Adams、Gary L. Catchen1994-07-01Physical review. B, Condensed matter
We have used perturbed-angular-correlation (PAC) spectroscopy to measure nuclear-electric-quadrupole interactions at the Ti site in ceramic samples of rutile ${\mathrm{TiO}}_{2}$. To investigate differences in the probe crystal chemistry, we used two chemically different PAC probes, $^{111}\ensuremath{\rightarrow}^{11…
Rare-earth and actinide compoundsSolid-state spectroscopy and crystallographyHeusler alloys: electronic and magnetic properties
I. Ledoux、J. Zyss1994-07-01Journal of Nonlinear Optical Physics & Materials
The development of important applications related to optical telecommunications and optical signal processing rely increasingly on nonlinear optical phenomena underlying these optical functions such as frequency conversion and modulation, amplification and emission, multiplexing and directional switching, optical logi…
Nonlinear Optical Materials ResearchInorganic and Organometallic ChemistryMolecular spectroscopy and chirality
Catherine Ringard-Lefebvre、Adam Baszkin1994-07-01Langmuir
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTBehavior of Poly(D,L-lactic acid) Monolayers at the Air-Water Interface. Effect of Spreading SolventsCatherine Ringard-Lefebvre and Adam BaszkinCite this: Langmuir 1994, 10, 7, 2376–2381Publication Date (Print):July 1, 1994Publication History Published online1 May 2002Publis…
biodegradable polymer synthesis and propertiesDiatoms and Algae ResearchBiopolymer Synthesis and Applications
Bronwyn L. Duffy、H. Edward Curry-Hyde、Noel W. Cant 等 4 位作者1994-07-01The Journal of Physical Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTIsotopic Labeling Studies of the Effects of Temperature, Water, and Vanadia Loading on the Selective Catalytic Reduction of NO with NH3 over Vanadia-Titania CatalystsBronwyn L. Duffy, H. Edward Curry-Hyde, Noel W. Cant, and Peter F. NelsonCite this: J. Phys. Chem. 1994, 98,…
Catalytic Processes in Materials ScienceCatalysis and Oxidation ReactionsIndustrial Gas Emission Control