Abbas J. Al-Saadi2014-12-18Journal of Kufa Physics
Exposure buildup factor (EBF) and energy absorption buildup factor (EABF) for some building materials (cement, clay brick, thermiston, gypsum and ordinary concrete) available in Iraq at the photon energy range 0.015-15.0 MeV up to penetration depth 40 mfp has been calculated using five parameter geometric progression…
Radioactivity and Radon MeasurementsRadiation Shielding Materials AnalysisAdvanced X-ray and CT Imaging
A. S. Averkin、A. P. Zhuravel、A. Karpov 等 5 位作者2014-12-18arXiv (Cornell University)
We describe a practical design of an ultra-compact on-chip superconductive micro-resonator as a potential magnetic element of metamaterial. The achieved resonator size with respect to the wavelength in our experiment is about λ/ 14400. The resonator consists of two superconducting Nb spirals, sandwiched face to face,…
Metamaterials and Metasurfaces ApplicationsMicrowave Engineering and WaveguidesAdvanced Antenna and Metasurface Technologies
Arum Yuniari2014-12-18Majalah Kulit Karet dan Plastik
One of the most serious problems encountered in poly(vinyl chloride) (PVC) processing is due to low thermal stability of the PVC. The purpose of the study was to determine the effect of LDPE and flame retardant on to the electrical and thermal nanocomposites properties The nanocomposites were prepared using a laboplas…
Recycling and Waste Management TechniquesPolymer Nanocomposite Synthesis and IrradiationPolymer Science and PVC
Jéssica Thaís do Prado Silva2014-12-18OpenAlex
A curcumina e um corante natural amarelo – alaranjado extraido do rizoma da Curcuma longa. Trata-se de um polifenol com importantes efeitos biologicos comprovados por estudos cientificos, atuando como um potente antioxidante, inibindo a formacao de celulas cancerigenas, alem de possuir efeito antiinflamatorio. O empre…
Electrospun Nanofibers in Biomedical ApplicationsDye analysis and toxicityAgricultural and Food Sciences
Thomas Trogdon2014-12-18Society for Industrial and Applied Mathematics eBooks
8.1 ▪ A Unified Numerical Approach for the Nonlinear Schrödinger Equations 8.1.1 ▪ Introduction A new method for analyzing boundary-value problems for both linear and integrable nonlinear partial differential equations (PDEs) was introduced by Fokas in [1] and extended by several authors; see [2]. This method is usual…
Solidification and crystal growth phenomena
Björn Wiberg2014-12-18Theseus (Ammattikorkeakoulujen)
An innovative new fuel tank was tested using a Direct Methanol Fuel Cell (DMFC). The aim of the fuel tank was to provide a fuel supply to the cell in all orientations while simultaneously capturing the carbon dioxide produced by the system in order to maintain a positive fuel pressure at all times.
Advancements in Solid Oxide Fuel CellsFuel Cells and Related MaterialsElectric and Hybrid Vehicle Technologies
Fanny Coumes2014-12-18HAL (Le Centre pour la Communication Scientifique Directe)
The objective of this work was to synthesize and characterize amphiphilic copolymers based on poly(ethylene glycol) (PEG) and poly(lactic acid) (PLA) intended for drug delivery applications. The polymers were chosen regarding to their biocompatibility and bioresorbability. Different architectures of amphiphilic copoly…
Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesCarbon dioxide utilization in catalysis
Björn Wiberg2014-12-18Theseus (Ammattikorkeakoulujen)
Direct Methanol Fuel Cells have been a promising source of alternative energy as the supply of conventional fuels is slowly being diminished. At the heart of this electrochemical cell a Proton Exchange Membrane laced with a Pt and Pt-Ru catalyst creating a redox reaction. The mechanical properties and composition of t…
Electrocatalysts for Energy ConversionAdvancements in Solid Oxide Fuel CellsFuel Cells and Related Materials
Chloé Valantin2014-12-18OpenAlex
Les courroies etudiees subissent des sollicitations mecaniques complexes et des variations thermiques jusqu’a 160°C. Pour ameliorer leurs durees de vie, les proprietes de l’interface entre le câble PA 4,6 adherise RFL et la matrice EPDM doivent etre optimisees. Dans ces travaux, les courroies ont subi un endommagement…
Textile materials and evaluationsFiber-reinforced polymer compositesMaterial Properties and Processing
Gaëlle Raveu2014-12-18theses.fr (ABES)
Mixed carbides (U, Pu)C, are good fuel candidate for IVth generation reactors because of their high fissile atoms density and excellent thermal properties for economical (more compact and efficient cores) and safety reasons (high melting margin). UC can be imagine as a surrogate material ror R&D studies on (U,Pu)C fue…
Nuclear reactor physics and engineeringRadioactive element chemistry and processingNuclear Materials and Properties
Xiang Li、Matthew J. Bird、Gina Mauro 等 7 位作者2014-12-18The Journal of Physical Chemistry C
ADVERTISEMENT RETURN TO ISSUEPREVAddition/CorrectionORIGINAL ARTICLEThis notice is a correctionCorrection to "Transport of Triplet Excitons along Continuous 100 nm Polyfluorene Chains"Xiang Li, Matthew Bird, Gina Mauro, Sadayuki Asaoka, Andrew R. Cook, Hung-Cheng Chen, and John R. Miller*Cite this: J. Phys. Chem. C 20…
Conducting polymers and applicationsMolecular Junctions and Nanostructures
Valda Vinson2014-12-18Science
Protein Evolution Small molecules that change the oligomeric state of proteins by binding to a site distant from the interface are called allosteric. They often act by taking advantage of intrinsic protein dynamics and stabilizing a particular conformation of the protein. Perica et al. show that
Protein Structure and DynamicsMicrobial Metabolic Engineering and BioproductionEnzyme Structure and Function
Phil Szuromi2014-12-18Science
Catalysis In order to maximize the activity of precious metals in catalysis, it is important to place the metal on some support with a high surface area (such as a zeolite) and to maintain the metal as small clusters or even atoms to expose as much metal as possible. The latter goal is more readily achieved with oxide…
Electrocatalysts for Energy ConversionCatalytic Processes in Materials ScienceNanomaterials for catalytic reactions
Phil Szuromi2014-12-18Science
Nanomaterials The high activity of precious metals such as platinum for reactions that occur in fuel cells can be enhanced by alloying with metals such as nickel and cobalt to form shaped nanoparticles, where platinum is concentrated at the corner and edge sites. Gan et al. used a combination of high-resolution imagin…
Machine Learning in Materials ScienceElectron and X-Ray Spectroscopy Techniques
SM Longela、Oscar Philander、Mornay Riddles2014-12-18Physical Sciences Research International
This paper presents a three-dimensional constitutive model for a shape-memory alloy that generalizes the behaviour of Nickel-Titanium transformation whilst subjected to heat, then cooling processes. This model is able to predict the behaviour of Shape Memory Alloys (SMAs) wires under complex thermo-mechanical loadings…
Shape Memory Alloy TransformationsTopology Optimization in EngineeringLaser and Thermal Forming Techniques
Francisco Guilherme Previdelli2014-12-18OpenAlex
obtenção do título de Mestre.
Natural Fiber Reinforced CompositesTextile materials and evaluationsMaterial Properties and Processing
Sérgio Silveira Stein2014-12-18theses.fr (ABES)
Les nouvelles avancées théoriques et technologiques basées sur les nanotechnologies ont permis de remettre au goût du jour la récupération d'énergie utilisant la thermoélectricité. Dans le cas de dispositifs en couches minces, des applications telles que la micro-génération de puissance ainsi que le refroidissement lo…
Advanced Thermoelectric Materials and DevicesAdvanced Thermodynamics and Statistical MechanicsThermal Radiation and Cooling Technologies
이규현、김휘동、김다흰 等 6 位作者2014-12-18OpenAlex
We synthesized shell thickness tunable hollow Cu2O to study diffusion length of Cu2O lattice oxygen in thermite reaction of Al/CuO composite. First, we synthesized monodisperse Cu nanoparticles with average diameter 36.5 ㎚. Hollow Cu2O is obtained via oxidation of Cu nanoparticles and formation of void from Kirkendall…
Copper-based nanomaterials and applications
Xiaolong Zhou、Sarayut Tunmee、Ikumi Toda 等 6 位作者2014-12-18Zenodo (CERN European Organization for Nuclear Research)
Hydrogenated amorphous carbon (a-C:H) films have been synthesized by a radio frequency plasma enhanced chemical vapor deposition (rf-PECVD) technique with different bias voltage from 0.0 to -0.5 kV. The Raman spectra displayed the polymer-like hydrogenated amorphous carbon (PLCH) film with 0.0 to -0.1 and a-C:H films…
Semiconductor materials and devicesDiamond and Carbon-based Materials ResearchElectronic and Structural Properties of Oxides
Aseel.A.Kareem Sir2014-12-18Global Journal of Human Social Science
In this study the physical properties such as the thermal conductivity, thermal diffusivity, porosity and density of the epoxy composites were characterized as a function of weight fraction of granite. According to the test results, addition of granite increases the thermal properties of the composites. This is due to…
Polymer Nanocomposites and PropertiesNatural Fiber Reinforced CompositesEpoxy Resin Curing Processes