Can Xu2014-11-01Advanced materials research
In the original to remove steel and steel fiber reinforced concrete coarse aggregate in quartz powder and a small amount of activator, can boost steel fiber content, and its application in construction makes it more convenient, but how the penetration resistance works is not particularly clear. Through the penetration…
Advanced ceramic materials synthesisRock Mechanics and ModelingHigh-Velocity Impact and Material Behavior
Yan Chang Li、Yu Meng Yang2014-11-01Applied Mechanics and Materials
This study analyses the Fushun oil shale semi-coke samples prepared in 450°C, 550°C and 650°C by using STA449 TGA. The experiment studied their ignition points, concluded that with the ascent of the char-making-temperature the semi-coke’s ignition point is getting higher. The test used Coats-Redfern way to study the s…
Thermochemical Biomass Conversion ProcessesPetroleum Processing and AnalysisThermal and Kinetic Analysis
Youngjin Lee2014-11-01Journal of the Korean Institute of Electrical and Electronic Material Engineers
This paper describes the development of a piezoelectric flextensional transducer, which aims toeffectively degrade the TCE contained in aqueous solution. In order to adjust the 1st flextensionalresonant frequency and output displacement of the flextensional transducer, the effect of the geometricalvariations on perfor…
Fiber-reinforced polymer compositesRecycling and Waste Management TechniquesPolymer Science and PVC
Li Jiang、Gang Yan、Zhen Fan2014-11-01Applied Mechanics and Materials
Aiming at the bad performance when achieve rich colors of fabric with very limited yarns in the traditional woven industry, the paper comes up with a solution of selecting yarn from a set of yarns based on SAGA(simulated annealing genetic algorithm). In order to reduce the computational complexity, original image is c…
Textile materials and evaluationsColor Science and ApplicationsIndustrial Vision Systems and Defect Detection
Richard J. Fitzgerald2014-11-01Physics Today
A substrate switch enables a novel two-dimensional arrangement of germanium atoms. A substrate switch enables a novel two-dimensional arrangement of germanium atoms.
Graphene research and applications2D Materials and ApplicationsMolecular Junctions and Nanostructures
Jing Xu2014-11-01Key engineering materials
In the experiment, the tetrabutyl titanate and samarium trinitrate were used as raw material, samarium doped TiO2 powder was prepared by sol-gel method. Main factors that affect the TiO2 nanoparticles, such as catalyst, ratio of raw materials, and calcination temperature of the preparation process were studied. TiO2 p…
TiO2 Photocatalysis and Solar CellsAdvanced Photocatalysis TechniquesAdvanced Nanomaterials in Catalysis
Hyun Min Lee、Sang-Hyun Kim、Nakwon Jang 等 4 位作者2014-11-01Journal of the Korean Institute of Electrical and Electronic Material Engineers
MgZnO has attracted a lot of attention for flexible device. In the flexible substrate, the crystalstructure of the thin films as well as the surface morphology is not good. Therefore, in this study, westudied on the effects of the oxygen pressure on the structure and crystallinity of Mg0.3Zn0.7O thin films deposited o…
ZnO doping and propertiesGas Sensing Nanomaterials and SensorsGa2O3 and related materials
Meng Lv、Guo Lin Yu、Yong Gang Xu 等 6 位作者2014-11-01Advanced materials research
Magnetotransport properties are investigated in two-dimensional electron gas (2DEG) of AlGaN/GaN heterostructure, including the Drude conductance, the Shubnikov-de Haas (SdH) oscillations and the change with temperature, the electron-electron interaction (EEI) and the change with temperature, the weak antilocalization…
ZnO doping and propertiesGaN-based semiconductor devices and materialsQuantum and electron transport phenomena
Ranjit Singh、Kulwinder Singh2014-11-01International Journal of Applied Mechanics and Engineering
Abstract The eigen value approach, following Laplace and Fourier transforms has been employed to find the general solution of the field equation in a micropolar elastic solid with voids for the plane strain problem. An application of an infinite space with impulsive force has been taken to illustrate the utility of th…
Composite Structure Analysis and OptimizationThermoelastic and Magnetoelastic PhenomenaNonlocal and gradient elasticity in micro/nano structures
Yu. A. Samoilovich2014-11-01Steel in Translation
A mathematical model is derived for the thermal-stress state of steel rollers quenched after inductive heating. The model involves numerical solution of a system of interrelated equations of nonlinear thermal conductivity and thermoviscoelasticity, with allowance for the kinetics of austenite phase transformation and…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
S. L. Khrypko2014-11-01Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques
The Raman scattering spectra of porous p −- and p +-silicon with a porosity of 20–70% are investigated. Conclusions on the morphology of silicon nanocrystallites are made based on this. It is shown that their size and shape depend on the level of sample doping. The crystallites are comprised of nanowires with diameter…
Thin-Film Transistor TechnologiesSilicon Nanostructures and PhotoluminescenceNanowire Synthesis and Applications
Liang Jiang、Yi Bao、Yu Hong Chen2014-11-01Key engineering materials
Vacuum insulation structure panel is the one type of the insulation materials. The characteristics of this material are not only low thermal conductivity, good sound insulation, energy efficient, environmental protection but also does not contain any ODS material. FLUENT software using Vacuum insulation structure pane…
High voltage insulation and dielectric phenomenaAerogels and thermal insulationEngineering Applied Research
Gong De Wu、Xiao Li Wang、Zhi Li Zhai2014-11-01Applied Mechanics and Materials
A series of transition metal alanine-salicylaldehyde Schiff base chromium (III) complexes immobilized on MCM-41 were prepared and characterized by various physico-chemical measurements such as FIIR, XRD, HRTEM, N2 sorption and elemental analysis. The immobilized complexes were effective and stable catalysts for the ep…
Metal-Organic Frameworks: Synthesis and ApplicationsMesoporous Materials and CatalysisPolyoxometalates: Synthesis and Applications
Lei Li、Xiao Guang Zhang、Ruilong Wen 等 8 位作者2014-11-01Key engineering materials
Mullite material was prepared from quartz (SiO2) and industrial alumina (γ-Al2O3). The effects of mineral composition and sintering temperature on the final phase composition and physical properties of mullite were investigated. The results shown that a large number of mullite phase was emerged in samples when the rat…
Advanced ceramic materials synthesisAluminum Alloys Composites PropertiesIntermetallics and Advanced Alloy Properties
Geraldine Nancy Rodriguez Perea、Leonardo Ribeiro Rodrigues、Rafael C.F. Basso 等 6 位作者2014-11-01Key engineering materials
In bone tissue engineering, synthetic scaffolds are commonly used and this should present the following requirements; (i) recapitulate the native three-dimensional (3D) hierarchical fibrous structure, (ii) possess biomimetic surface properties and (iii) demonstrate mechanical integrity. However, some methods of produc…
Bone Tissue Engineering MaterialsDental Implant Techniques and Outcomesbiodegradable polymer synthesis and properties
A. P. Tyutnev、A. V. Nikerov、V. S. Saenko 等 4 位作者2014-11-01Russian Journal of Physical Chemistry B
The general problems of hole transport and bimolecular recombination of charge carriers in molecularly doped polystyrene with an ultimately low dopant concentration (6 wt %) were considered. The experimental studies were performed by the radiation-induced time-of-flight method with bulk generation of charge carriers.…
Organic Electronics and PhotovoltaicsOrganic Light-Emitting Diodes ResearchConducting polymers and applications
Yi Wang、Cheng Huang、Pai Bin Xie 等 6 位作者2014-11-01Applied Mechanics and Materials
Being added by H3BO3 as flux, the nanosize strong green phosphor Zn2SiO4: Mn2+ was prepared by an improved sol-gel method. The structure and the morphology of the samples were examined by XRD, UV-VL spectrophotometer and SEM. The photoluminescence properties were measured by fluorescence spectrometer. Results show tha…
Luminescence Properties of Advanced MaterialsTransition Metal Oxide Nanomaterials
Hongsuk Yi2014-11-01Journal of the Korean Physical Society
We present a first-principles theoretical study of the relative formation energies and the electronic states of the $$InP\left( {111} \right)A - \left( {\sqrt 3 \times \sqrt 3 } \right)$$ surface. The energetically most favorable reconstruction has a T 4-site P trimer on the surface, which exhibits a metallic band cha…
Advanced Chemical Physics StudiesGraphene research and applicationsSurface and Thin Film Phenomena
Lionel Jacubowiez2014-11-01Photoniques
Les optiques diffractives présentent de nombreux avantages par rapport aux optiques traditionnelles. Elles sont en général légères, peu encombrantes, possèdent des propriétés qui n’existent pas en optique traditionnelle et interviennent dans la fabrication d’éléments hybrides (modification de la polarisation, compensa…
Photorefractive and Nonlinear OpticsAdvanced Optical Imaging TechnologiesOptical Coatings and Gratings
Y. Shimizu、Yusuke Kawanobe、Toshiisa Konishi 等 6 位作者2014-11-01Key engineering materials
We have previously synthesized silver-containing hydroxyapatite (Ag-HAp) powders by an ultrasonic spray-pyrolysis (USSP) technique. On the other hand, we have successfully fabricated novel calcium-phosphate cements (CPCs) composed of mainly β-tricalcium phosphate (β-TCP) phase with anti-washout property (hereafter, β-…
Bone Tissue Engineering MaterialsNanoparticles: synthesis and applicationsOrthopaedic implants and arthroplasty