Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
A Si–SiO2–MgO device showing nonvolatile resistive switching effect is fabricated. It is observed the resistance of the device changed from high value to low value at a certain transition voltage after being stimulated by a large current. In addition, the transition voltage shifts reproducibly under a reversed large c…
The face-shear vibration modes of [011] poled Zt ± 45° cut relaxor-PT crystals and their applications for linear piezoelectric motors were investigated. Unlike piezoelectric ceramics, the rotated crystal was found to exhibit asymmetric face-shear deformations, and its two high-order face-shear modes degraded into two…
We report GaN thin film transistors (TFT) with a thermal budget below 250 °C. GaN thin films are grown at 200 °C by hollow cathode plasma-assisted atomic layer deposition (HCPA-ALD). HCPA-ALD-based GaN thin films are found to have a polycrystalline wurtzite structure with an average crystallite size of 9.3 nm. TFTs wi…
The transformation from a disordered into an ordered version of the zeolite natrolite occurs on prolonged heating of this material in the crystallizing medium, but not if the mother liquor is replaced by water or an alkaline solution. This process occurs for both aluminosilicate and gallosilicate analogues of natrolit…
In this paper, the heterofullerenes made of the smallest fullerene, C20 were investigated by quantum chemistry calculations based on density functional theory. The geometrical structures, energies, electronic properties, and the aromaticities of the C19X (X = B, N, O, Al, Si, P, S, Ga, Ge, As, and Se) cages were studi…
The addition of spacing layers in organic photovoltaic cells (OPVs) can enhance light absorption by optimizing the spatial distribution of the incident optical field in the multilayer structure. We explore the optical spacing effect in OPVs achieved using a diluted electron acceptor layer of C60. While optical spacing…
We have investigated structural and magnetic properties at low temperature phases in spinel oxides Fe1+xV2−xO4 (0 ≤ x ≤ 0.4) using synchrotron powder diffraction, magnetization, and specific heat experiments. The only lattice distortion from a cubic to a tetragonal phase (c > a) occurs at ferrimagnetic order temperatu…
This paper presents simulation results of air-blown coal gasification-based combined cycles when using low-rank coals, by means of a previously realized thermodynamic model. In detail, besides considering a sub-bituminous coal, attention is also paid to a brown coal, pre-dried to reduce its high moisture content. When…
The Combustive Sound Source (CSS) is being developed as an environmentally friendly source to be used in ocean acoustics research and surveys. It has the ability to maintain the same wide bandwidth signal over a 20 dB drop in source level. The CSS consists of a submersible combustion chamber filled with a fuel/oxidize…
We have systematically explored the time-dependent plasticity of (0 0 0 1)-oriented ZnO single crystal through spherical indentation tests. Constant load indentation creep tests were performed in elastic strain and elastic–plastic strain regimes. In both regimes, creep indeed occurred at ambient temperature. With the…
Abstract TiO2‐based dye‐sensitized solar cells (DSSCs) sensitized with the Ru‐dyes N719 and Z907, are subjected to prolonged reverse bias (RB) by imposing a constant current density of 25 mA cm−2 for up to 1000 h. The temporal changes of the DSSCs during the aging process are followed by the periodical recording of cu…
Indium-tin-oxide (ITO) free inverted organic solar cells (IOSCs) based on aluminum-doped zinc oxide (AZO) cathode, low-temperature aqueous solution processed zinc oxide (ZnO) electron extraction layer, and poly(3-hexylthiophene-2, 5-diyl):[6, 6]-phenyl C61 butyric acid methyl ester blend were realized in this work. Th…
Nanodielectric elastomer films consisting of a silicone rubber as the matrix and conductive polyaniline nanorods (PANI-NR) as the filler were fabricated and their electro-mechanical actuation performance was investigated. The nanodielectric elastomers displayed a typical insulator-to-conductor transition as the conten…
ABSTRACT This study aims at characterizing in depth the microstructure of propylene‐co‐1‐pentene‐co‐1‐hexene terpolymers, which have been recently reported to develop the isotactic polypropylene δ trigonal polymorph when the total comonomer content is high enough. Such a specific crystalline form had been only reporte…
We have investigated the effects induced by periodic nanosphere arrays on the performance of organic solar cells (OSCs). Two-dimensional periodic arrays of polystyrene nanospheres were formed by using a colloidal lithography method together with plasma etching to trim down the size to various degrees on the substrates…
To date, nonfullerene acceptors for organic solar cells have yet to reach the overall device performance achieved with fullerene derivatives. Power conversion efficiencies are low, even when combined with narrow optical gap polymers, with the processing conditions and blend microstructure difficult to optimize. To und…
ZnO-based nanogenerators with excellent performance and convenient functionalization are particularly desirable for self-powered technology, which is however difficult to achieve simultaneously in traditional piezoelectric ZnO nanogenerators. Here, we report a design of electrostatic ZnO nanogenerator by virtue of a t…
Comparing predicted and measured spectra from isolated and ordered nanoparticles (NPs) indicates that ordering NPs into lattices can blueshift the localized surface plasmon resonant (LSPR) spectral feature and increase its wavelength sensitivity to local changes in refractive index. This occurs at lattice constants at…
Abstract BACKGROUND The epoxidation of propylene with H2O2 in liquid phase catalyzed by a TS‐1/SiO2 catalyst in a fixed‐bed reactor has been studied. The effects of reaction temperature (313–328 K), methanol concentrations (55–70 wt%) and hydrogen peroxide concentrations (9–15 wt%) on the reaction are investigated. Th…
Prediction of fatigue life has become an interesting issue in biomaterial engineering and design for reliability and quality purposes, particularly for biometallic material with modified surfaces. Commercially pure titanium (Cp-Ti) implanted with nitrogen ions is a potential metallic biomaterial of the future. The eff…