Y. C. Lin、W. C. Liu、C. L. Chang 等 5 位作者2014-06-10Zenodo (CERN European Organization for Nuclear Research)
By die-attaching GaN-based light-emitting diodes (LEDs) on Si substrates with eutectic AuSn solder, the external quantum efficiency of the LEDs was enhanced by 3.5% at a current input of 120 A/cm2. The enhancement of the external quantum efficiency of the die-attached LED chips is attributed to a reduction in compress…
Semiconductor Quantum Structures and DevicesZnO doping and propertiesGaN-based semiconductor devices and materials
N. Yu. Obvintseva、A.V. Kaminskiy、S. A. Epshteyn2014-06-10Izvestiya MGTU MAMI
The features of thermal methods for the determination of kinetic parameters of oxidation of carbon materials are considered in the article. A modified method for the determination of kinetic parameters on the basis of the quantities characterizing the steady state of a system is suggested.
Thermal and Kinetic AnalysisEnvironmental and Industrial SafetyCoal Combustion and Slurry Processing
Marie Chabert、Farah Salameh、Antoine Picot 等 4 位作者2014-06-10HAL (Le Centre pour la Communication Scientifique Directe)
(Conférencier invité)
High voltage insulation and dielectric phenomenaPower Transformer Diagnostics and InsulationPower System Reliability and Maintenance
Xiao Zhang2014-06-10OhioLink ETD Center (Ohio Library and Information Network)
In recent years, clay filled polymer nanocomposites are manufactured for a variety of advanced applications due to the abundant resource in nature, platelet structure bearing high aspect ratio, high efficiency, and promising ion-exchange capacity of clay minerals, especially Montmorillonite.To achieve a moderate level…
Polymer Nanocomposites and PropertiesPolymer Nanocomposite Synthesis and IrradiationSilicone and Siloxane Chemistry
Inder Krishen Panditta2014-06-10Global Journal of Researches in Engineering
Discrete structural models, as a basis for evolving a new design methodology, created the need for considering structural configuration as a variable. Existing energy methods and variational principles do not provide analysis link between pairs of structural configurations, whereas Principle of Quasi Work addresses th…
Engineering Technology and MethodologiesStructural mechanics and materialsAdvanced Theoretical and Applied Studies in Material Sciences and Geometry
Aozhen Xie2014-06-10OhioLink ETD Center (Ohio Library and Information Network)
Transitional metal dichalcogenides (TMDs) have emerged to be one of the most promising materials for next-generation electronics due to their unusual electronic and photoeletronic properties.Wet chemistry exfoliation proves to be a practical method to exfoliate TMDs in large scale that is usually based on n-butyl lith…
2D Materials and ApplicationsChalcogenide Semiconductor Thin FilmsSemiconductor materials and interfaces
Çetin Öztürk、Serhat Başpınar、Z. Aslanoğlu 等 4 位作者2014-06-10Afyon Kocatepe University Journal of Sciences and Engineering
Bu almada, tabular almina (TA), beyaz ergimi almina (WFA) ve her ikisinin karm (%50 TA+ % 50 WFA) tayc tanelerin zellikle elik pota endstrisinde yaygn olarak kullanlan yksek alminal dklebilir refrakterlerin fiziksel ve mekaniksel zelliklerine etkileri aratrlmtr. Bu kapsamda, yksek almina ierikli bu tayc tanelerin ve d…
Additive Manufacturing and 3D Printing TechnologiesMaterial Properties and ApplicationsMechanical and Thermal Properties Analysis
Pierre-Antoine Morvan、Yann Lecieux、Dominique Leduc 等 6 位作者2014-06-10Revue des composites et des matériaux avancés
International audience
Cultural Heritage Materials AnalysisSilicone and Siloxane Chemistry
Pan Xin、Zhibin Ma、Guowei Li 等 6 位作者2014-06-10High Power Laser and Particle Beams
Several CVD diamond films were etched using ECR plasma in different magnetic fields and working pressure. Double probe and ion sensitive probe were used to investigate the influence of magnetic field and working pressure on etching effect. Results showed that when the divergence magnetic field was changed to the conve…
Metal and Thin Film MechanicsDiamond and Carbon-based Materials ResearchAdvanced Surface Polishing Techniques
Кh.M. Naffaa、V.A. Dubkovsky2014-06-10Odes’kyi Politechnichnyi Universytet Pratsi
A developed classification of passive heat residual removal systems from reactors containments allows conducting a detailed analysis of various concepts of passive residual heat removal from the protective shells of nuclear reactors (HPRS-С) of the new generation. Based on our analysis of the various projects of new r…
Graphite, nuclear technology, radiation studies
Jinwu Wang、Fafeng Xia2014-06-10Research Journal of Applied Sciences Engineering and Technology
In order to research effect of plating parameters on wear resistance of Ni-SiC composite coatings, Ni coatings and Ni-SiC composite coatings were synthesized on steel substrates by electrodeposition method. The results indicate that the contents of SiC particles increase with density of pulse current and on-duty ratio…
Corrosion Behavior and InhibitionElectrodeposition and Electroless CoatingsSemiconductor materials and interfaces
J.M. Lackner、Serap Gümüş、Şeyda Polat 等 5 位作者2014-06-10Bioinspired Biomimetic and Nanobiomaterials
The current work explains the influence of the polymer substrate on the topography formation of nano-wrinkled thin titanium films. Similar to the biomimetic antetype of human skin, this wrinkling phenomenon increases the elastic deformability of hard materials under tensile loading by flattening the wrinkled waves bef…
Surface Modification and SuperhydrophobicityAdvanced Sensor and Energy Harvesting MaterialsAdvanced Materials and Mechanics
Zuguang Ying、Yong Wang、Zefei Zhu2014-06-10STRUCTURAL ENGINEERING AND MECHANICS
The intentional buckling design of micro-films has various potential applications in engineering. The buckling amplitude and critical strain of micro-films are the crucial parameters for the buckling design. In the reported studies, the film parameters were regarded as deterministic. However, the geometrical and physi…
Nonlocal and gradient elasticity in micro/nano structuresAdvanced Materials and MechanicsNanofabrication and Lithography Techniques
Miseong Gwon、Jae Ho Baek、Myung Hwan Kim 等 5 位作者2014-06-10Applied Chemistry for Engineering
변압기 내부에서 발생한 열의 냉각과 절연의 목적으로 채워지는 전기절연유는 광유가 널리 이용되고 있지만, 유출 시야기되는 환경오염 문제와 열적 불안정성 등의 문제가 있다. 친환경적이고 넓은 온도 범위에서 사용 가능한 전기절연유를 합성하기 위해, 디글리세롤과 두 종류의 지방산을 반응시켜 diglycerol ester를 합성하였다. 서로 다른 특성을 가진 올레산과 카프릴산의 몰비에 따른 절연특성을 분석한 결과, 지방산의 몰비가 Oleic acid:Caprylic acid = 1:3일 때 유동점은 $-50^{\circ}C$ , 인화점은 $306^{\circ}C$ 로 가장…
Catalytic Processes in Materials ScienceBiodiesel Production and ApplicationsLignin and Wood Chemistry
Angela Nair Avelar、Geraldo Magela da Costa、Eliomar Evaristo Ferreira 等 4 位作者2014-06-10Canadian Metallurgical Quarterly
Nine bauxite samples from Brazil and one from Ghana were submitted to alkaline digestion at 145°C. All initial samples and their red muds were chemically analysed and characterised by X-ray diffraction and Mössbauer spectroscopy at 298 and 77 K. The settling rates of all red muds were also measured. It was observed th…
Clay minerals and soil interactionsIron oxide chemistry and applicationsBauxite Residue and Utilization
Lucrezia Morticelli、Daniel Thomas、John Fisher 等 5 位作者2014-06-10Pneumologie
Introduction: Mitral valve regurgitation represents the second major valvular disorder in the western world, whereas current strategies for mitral valve reconstruction are imperfect. The aim of this study was to develop a tissue engineered substitute for mitral valve leaflet reconstruction using acellular porcine peri…
Cardiac Valve Diseases and TreatmentsElectrospun Nanofibers in Biomedical ApplicationsTissue Engineering and Regenerative Medicine
Cai Hong Bai、Hai He、Fan Cheng 等 10 位作者2014-06-10Applied Mechanics and Materials
Steroidal saponin: (1β,3β,5β,25S)-spirostan-1,3-diol1-[α-L-rhamnopyranosyl-(1→2)-β-D-xylopyranoside] (RCE-4) is the most abundant and bioactive members in Reineckia carnea, has been reported to possess antiinflammatory activity, but the underlying mechanisms remain largely unknown. The present aim was to study express…
Natural product bioactivities and synthesisPhytochemical Studies and BioactivitiesPhytochemistry and Bioactive Compounds
Hun Sik Han、Seoyoung C. Kim、Sarng Woo Karng2014-06-10설비공학논문집
The experimental performance evaluation of a cylindrical steam reformer with various thermal conditions has been conducted. The bottom space of the cylindrical reactor was packed with Ruthenium (Ru) catalyst. A three-segment furnace was installed to create the axially variable boundary temperature distribution. Six K-…
Catalytic Processes in Materials ScienceCatalysts for Methane ReformingCatalysis and Oxidation Reactions
Rebecca E. Olsen、Calvin H. Bartholomew、David B. Enfield 等 4 位作者2014-06-10BULLETIN OF CHEMICAL REACTION ENGINEERING AND CATALYSIS
A facile, industrially viable, one-pot synthesis of 0.5-8 wt% Pt supported on 22 mol% Al-modified ana-tase with high surface area and thermal stability is presented. Four pathways were studied to deter-mine the effects of support properties on catalyst dispersion, and the highest dispersions were observed for high sur…
TiO2 Photocatalysis and Solar CellsAdvanced Photocatalysis TechniquesCatalytic Processes in Materials Science
Qing Jia Meng、Cheng Yang、Xiu Yong Wang 等 4 位作者2014-06-10Applied Mechanics and Materials
Giant magnetostrictive actuator (GMA) is a new type of vibration control driving device. Since it has a lot of nonlinear, its performance model has been can't descrip good. This paper describes the self-made physical design of GMA, develop the GMA performance research experiment. For different excitation voltage, GMA…
Electric Motor Design and AnalysisMagnetic Properties and ApplicationsMagnetic Bearings and Levitation Dynamics