Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Pękanie gorące jest jednym z głównych problemów odlewania stopów magnezu oraz ich łączenia przez spawanie. Po- mimo licznych badań, w praktyce przemysłowej ten rodzaj pękania nadal stanowi istotny problem. W pracy przedstawiono wpływ czynników metalurgicznych, konstrukcyjnych i technologicznych na skłonność stopu QE22…
In this study, the effects of fly ash on Khorasan mortar composed of brick or tile powder and lime were investigated to improve its mechanical properties. In the mixtures, fly ash was used instead of 0- to 4-mm crushed tile or 0- to 1-mm tile powder as aggregate. In addition, slaked lime was used as a binder, and 0–10…
Formation mechanism of ledeburites in laser alloying composite coating on a titanium alloy was investigated. The amorphous reinforced composite coatings were fabricated on the TA2 alloys by laser alloying of Co-Al-Fe-TiC/C mixed powders. Through the X-ray diffraction and high resolution transmission electron microscop…
In emerging countries, the driving elements for sustainable development are greenhouse and global warming concerns and the need for the development of low-CO2 cements as replacement for Portland cement. Pumice is an aluminosilicate-type material that can be condensed with NaOH and Na2SiO3 solution and can be used for…
This paper is concerned with the numerical solution of polymer melt flows of both extrudate-swell and tube-tooling die-extrusion coatings, using a hybrid finite element/finite volume discretisation fe/fv. Extrudate-swell presents a single dynamic freesurface, whilst the complex polymer melt coating flow exhibit two se…
W artykule zaprezentowano możliwości integracji nowoczesnych technologii wykonania oprzyrządowania odlewniczego oraz metod optymalizacji konstrukcji. Systemy przyrostowego wytwarzania (ang. additiv manufacturing, AM) pozwalają na projektowanie bardzo złożonych kształtów konstrukcji, spełniających w znacznie większym s…
Abstract The article deals with the influence of annealing parameters on evolution of microstructure and mechanical properties of dual phase steel. Dual phase steel was annealed in laboratory conditions according to the three chosen cycles of annealing: into intercritical region (780°C), into austenite region (920°C)…
Rheological and electrical properties of polymeric nanoparticle solutions and their influence on the rheological and electrical properties of red blood cell (RBC) suspensions have been studied. Poly(acrylic acid) macromolecules of different architecture and molecular weight were used: (i) a new core-shell type star po…
In the present work the MMT-Na+ clay was functionalized with 3-aminopropyltriethoxysilane (γ-APS) and incorporated in a commercial formulation epoxy-based powder coating in a proportion of 8 wt% and applied on 1008 carbon steel panels by electrostatic spray. Adhesion, flexibility, impact and corrosion performance in s…
The purpose of this work is to present a ball-cratering equipment configuration to measure the coefficient of friction. Two load cells were used to measure, in real time, the “normal” and “tangential” forces during the experiments to calculate the coefficient of friction. Micro-abrasive wear tests were conducted on an…
The fracture behavior of polymer-bonded explosive (PBX) seriously affects the safety and reliability of weapon system. The effects of interface debonding and initial meso-damage on the fracture behavior of PBX under quasi-static tension are studied using numerical method. A two-dimensional representative volume elemen…
Surface hydrophobicity of poly (lactic acid) have raise the concerns of surface incompatibility of PLA to function as biomaterial. Thus, various approaches have been made to improve the surface hydrophilicity of PLA. In the present paper, PLA materials were surface modified by alkaline hydrolysis. The indication of th…
Fundamental understanding of the self-assembly of domains in block copolymers (BCPs) and capabilities in control of these processes are important for their use as nanoscale templates in various applications. This paper focuses on the self-assembly of spin-cast and printed poly(styrene-block-methyl methacrylate) BCPs o…
The goal of this work was to study the effects of relative humidity (RH) and temperature on the barrier properties of biaxially-oriented polyvinyl alcohol (BOVLON) and polypropylene (BOPP) films. The water vapor transmission rate (WVTR) and the oxygen transmission rate (OTR) of the BOVLON and BOPP films were determine…
Giant superconducting fluctuation and anomalous semiconducting normal state in NdO1−xFxBi1−yS2 single crystals, Liu, Jianzhong, Fang, Delong, Wang, Zhenyu, Xing, Jie, Du, Zengyi, Li, Sheng, Zhu, Xiyu, Yang, Huan, Wen, Hai-Hu
Poly (lactic acid) – b – poly (ethylene glycol) (PLA-b-PEG) co-polymers with block lengths of 1000–750, 5000–1000, 1000–5000, and bulk PEG were added to PLA electrospinning dopes to create hydrophilic but non-water soluble nanofibers. PLA-b-PEG block lengths strongly affected the total amount of PEG that could be inco…
Abstract The boundary conditions of saponite formation are generally considered to be well known, but significant gaps in our knowledge persist in respect to the influence of solution chemistry, temperature, and reaction time on the mineralogy, structure, stability, and chemical composition of laboratory-grown ferrous…
This paper deals with Partial Discharge (PD) detection in Pulse Width Modulation (PWM) inverter fed electric motors. The aim of this work is to detect PD activity in random wound motors, which is the main cause for premature breakdown of insulation system. Detection is performed thanks to a non-intrusive electromagnet…
Amorphous silica nanoparticles (SiNPs) are being used in biomedical, pharmaceutical, and many other industrial applications entailing human exposure. However, their potential vascular and systemic pathophysiologic effects are not fully understood. Here, we investigated the acute (24 hours) systemic toxicity of intrape…
The present investigation deals with the facile synthesis and characterization of chitosan (CTS)-based zinc oxide (ZnO) nanoparticles (NPs) and their antimicrobial activities against pathogenic microorganisms. ZnO–CTS NPs were synthesized through two different methods: nano spray drying and precipitation, using variou…