F. Messina、M. Cannas2007-03-02arXiv
The kinetics of E' centers (silicon dangling bonds) induced by 4.7eV pulsed laser irradiation in dry fused silica was investigated by in situ optical absorption spectroscopy. The stability of the defects, conditioned by reaction with mobile hydrogen of radiolytic origin, is discussed and compared to results of similar…
cond-mat.dis-nnMaterials Science
F. Messina、S. Agnello、R. Boscaino 等 6 位作者2007-03-02arXiv
The photo-luminescence features of Ge-oxygen defect centers in a 100nm thick Ge-doped silica film on a pure silica substrate were investigated by looking at the emission spectra and time decay detected under synchrotron radiation excitation in the 10-300 K temperature range. This center exhibits two luminescence bands…
cond-mat.dis-nnMaterials Science
Gerhard H. Fecher、Benjamin Balke、Siham Ouardi 等 9 位作者2007-03-02Journal of Physics D Applied Physics
This work reports on high resolution photoelectron spectroscopy for the valence band of Co 2 Mn 1− x Fe x Si ( x = 0,0.5,1) excited by photons of about 8 keV energy. The measurements show good agreement with calculations of the electronic structure using the LDA + U scheme. It is shown that the high energy spectra rev…
Semiconductor materials and interfacesRare-earth and actinide compoundsHeusler alloys: electronic and magnetic properties
Gerhard H. Fecher、Claudia Felser2007-03-02Journal of Physics D Applied Physics
This work reports about electronic structure calculations for the Heusler compound Co$_2$FeAl$_{1-x}$Si$_x$. Particular emphasis was put on the role of the main group element in this compound. The substitution of Al by Si leads to an increase of the number of valence electrons with increasing Si content and may be see…
MXene and MAX Phase MaterialsHeusler alloys: electronic and magnetic propertiesIntermetallics and Advanced Alloy Properties
Tomohiro Shimizu、Tian Xie、J. Nishikawa 等 6 位作者2007-03-02Advanced Materials
Growth of vertical epitaxial Si(100) nanowires on Si(100) substrates is demonstrated (see figure) using a combination of an anodic aluminum oxide template, catalytic Au particles embedded in nanopores directly on the Si substrate by using electroless deposition, and vapor–liquid–solid growth using SiH4. HF acid treatm…
Nanowire Synthesis and ApplicationsSemiconductor materials and interfacesAnodic Oxide Films and Nanostructures
Anne-Laure Pénard、Thierry Gacoin、Jean‐Pierre Boilot2007-03-02Accounts of Chemical Research
Sol-gel processing is well-known to be a powerful technique for designing materials for optical applications. Here, some recent applications of functionalized sol-gel coatings in optics are briefly reviewed. Lanthanide-doped oxide nanocrystals form a new promising class of nanophosphors allowing the easy sol-gel prepa…
Mesoporous Materials and CatalysisCatalytic Processes in Materials ScienceAdvanced Photocatalysis Techniques
F. Messina、M. Cannas2007-03-02arXiv
In situ optical absorption spectroscopy was used to study the generation of E' centres in amorphous SiO_2 occurring by photo-induced breaking of Si-H groups under 4.7eV pulsed laser radiation. The dependence from laser intensity of the defect generation rate is consistent with a two-photon mechanism for Si-H rupture,…
Materials Sciencecond-mat.dis-nn
Bichitra Ganguly2007-03-02arXiv
Deliberations in the National Seminar held on 9-10 February, 2007 at Saha Institute of Nuclear Physics, Kolkata, INDIA
Materials Science
Helmut Schneider、C. Herbort、G. Jakob 等 6 位作者2007-03-02Journal of Physics D Applied Physics
We report the deposition of thin Co$_2$FeSi films by RF magnetron sputtering. Epitaxial (100)-oriented and L2$_1$ ordered growth is observed for films grown on MgO(100) substrates. (110)-oriented films on Al$_2$O$_3$(110) show several epitaxial domains in the film plane. Investigation of the magnetic properties reveal…
Heusler alloys: electronic and magnetic propertiesMagnetic properties of thin filmsMXene and MAX Phase Materials
Hem Chandra Kandpal、Vadim Ksenofontov、Marek Wojcik 等 5 位作者2007-03-02Journal of Physics D Applied Physics
Polycrystalline samples of the Heusler compound Co 2 TiSn have been prepared and studied using bulk techniques (x-ray diffraction and magnetization) as well as local probes ( 119 Sn Mössbauer spectroscopy and 59 Co nuclear magnetic resonance spectroscopy) in order to determine how disorder affects the half-metallic be…
Thermal Expansion and Ionic ConductivityChemical and Physical Properties of MaterialsHeusler alloys: electronic and magnetic properties
F. Messina、M. Cannas2007-03-02arXiv
The passivation by diffusing H2 of silicon dangling bond defects (E' centers, induced by laser irradiation in amorphous SiO_2 (silica), is investigated in situ at several temperatures. It is found that the reaction between E' center and H_2 requires an activation energy of 0.38eV, and that its kinetics is not diffusio…
Materials Sciencecond-mat.dis-nn
S. Leclercq、Gilles Rousselier、Georges Cailletaud2007-03-02arXiv
A simplified polycrystalline model (the so-called RL model) is proposed to simulate the anisotropic viscoplastic behavior of metallic materials. A generic method is presented that makes it possible to build a simplified anisotropic material texture, based on the principal features of the pole figures. The method is ap…
Materials Science
Xinwen Wang、Peter H. Lin、Qizhi Yao 等 4 位作者2007-03-02World Journal of Surgery
INTRODUCTION: Cardiovascular disease, including coronary artery and peripheral vascular pathologies, is the leading cause of mortality in the United States and Western countries. There is a pressing need to develop small-diameter vascular vessels for bypass surgery and other vascular reconstructive procedures. Tissue…
3D Printing in Biomedical ResearchTissue Engineering and Regenerative MedicineElectrospun Nanofibers in Biomedical Applications
Mathew George、Swapna S. Nair、K A Malini 等 5 位作者2007-03-02Journal of Physics D Applied Physics
Fine particles of cobalt ferrite were synthesized by the sol?gel method. Subsequent heat treatment at different temperatures yielded cobalt ferrites having different grain sizes. X-ray diffraction studies were carried out to elucidate the structure of all the samples. Dielectric permittivity and ac conductivity of all…
Multiferroics and related materialsMagnetic Properties and Synthesis of FerritesMagneto-Optical Properties and Applications
Hem C Kandpal、Gerhard H Fecher、Claudia Felser2007-03-02arXiv
In this paper, results of ab initio band structure calculations for A 2 BC Heusler compounds that have A and B sites occupied by transition metals and C by a main group element are presented. This class of materials includes some interesting half-metallic and ferromagnetic properties. The calculations have been perfor…
Advanced Physical and Chemical Molecular InteractionsHeusler alloys: electronic and magnetic propertiesChemical and Physical Properties of Materials
Vadim Cheianov、Vladimir I. Fal’ko、B. L. Altshuler2007-03-02OpenAlex
The focusing of electric current by a single p-n junction in graphene is theoretically predicted. Precise focusing may be achieved by fine-tuning the densities of carriers on the n- and p-sides of the junction to equal values. This finding may be useful for the engineering of electronic lenses and focused beam splitte…
Graphene research and applicationsQuantum-Dot Cellular AutomataQuantum and electron transport phenomena
E.S. Jesus Filho、Alex Pereira de Lima、Neide Aparecida Mariano2007-03-01REM - International Engineering Journal
O controle dos ciclos térmicos, nos tratamentos térmicos de têmpera e revenido, nos aços inoxidáveis martensítico do tipo 13Cr5Ni0,02C, é essencial para se obter boa resistência mecânica associada à resistência à corrosão, principalmente em equipamentos para a extração de petróleo. Corpos-de-prova foram austenizados p…
Hydrogen embrittlement and corrosion behaviors in metalsMicrostructure and Mechanical Properties of SteelsCorrosion Behavior and Inhibition
Raúl Bermejo、Peter Supancic、Tanja Lube2007-03-01Key engineering materials
In this work, the geometry effect on the thermal shock behaviour of a nine layered Al2O3- 5%tZrO2/Al2O3-30%mZrO2 ceramic fabricated by slip casting has been studied. A finite element model has been used to estimate the magnitude and location of the maximum thermal stresses in the layered material as well as the influe…
Thermal properties of materialsAdvanced materials and compositesAdvanced ceramic materials synthesis
X.‐J. Zhou、Peter A. Tanner、M. Faucher2007-03-01Spectroscopy Letters
The luminescence spectrum of Cs2NaScCl6:Pr3+ (0.1 at.%) has been recorded at temperatures down to 10 K and assigned between 20,800 and 9900 cm−1. Twenty‐three energy levels of the 4f2 configuration Pr3+ ion were located and then fitted by the conventional 4f2 crystal field calculation, as well as by a configuration in…
Perovskite Materials and ApplicationsLuminescence Properties of Advanced MaterialsSolid-state spectroscopy and crystallography
U.L.B. Jayasinghe、N. Hara、Yoshinori Fujimoto2007-03-01Natural Product Research
Chemical investigation of polar fractions of the methanol extract of the fruits of Diploclisia glaucescens of the family Menispermaceae furnished two new phenyl glycosides, 4-(2-nitroethyl)phenyl-beta-D-xylopyranosyl-(l approximately 6)-beta-D-glucopyranoside, and 4-cyanophenyl-beta-D-xylopyranosyl-(l approximately 6)…
Natural product bioactivities and synthesisPhytochemistry and Biological ActivitiesPhytochemistry and Bioactive Compounds