Genki Sakai、Zenji Horita、Terence G. Langdon2004-01-01MATERIALS TRANSACTIONS
Experiments were conducted to evaluate the superplastic properties in three orthogonal directions after processing by equal-channel angular pressing (ECAP). Using an Al-3% Mg-0.2% Sc alloy pressed to a strain of ∼8 through route BC, miniature tensile specimens were cut inthe pressing direction perpendicular to the tra…
Microstructure and mechanical propertiesAluminum Alloy Microstructure PropertiesAluminum Alloys Composites Properties
Kazuyuki Hokamoto、Yasuhiro Ujimoto、Masahiro Fujita2004-01-01MATERIALS TRANSACTIONS
A novel explosive welding technique which uses underwater shock waves to weld thin sheets and the technical advantages of this technique are reported. Using this technique, a thin metal plate is uniformly accelerated by underwater shock waves. The initial angle of inclination of the explosive pack is determinant in hi…
Energetic Materials and CombustionHigh-Velocity Impact and Material BehaviorStructural Response to Dynamic Loads
Margarida C. Moncada、Fernando Piña、Ana Cecília A. Roque 等 6 位作者2004-01-01European Journal of Organic Chemistry
Abstract We studied the intricate pH‐ and light‐dependent network of the thermal and photochemical reactions of the 4′‐(dimethylamino)‐7‐hydroxyflavylium ion by continuous irradiation, flash photolysis, 1 H NMR spectroscopy, and stopped flow analysis. The distribution of the various forms at the pH‐dependent thermodyn…
Molecular Sensors and Ion DetectionPhotochromic and Fluorescence ChemistryPhotoreceptor and optogenetics research
Robert Stevens、Pamela M. Norris、Leonid V. Zhigilei2004-01-01Electronic and Photonic Packaging, Electrical Systems Design and Photonics, and Nanotechnology
With the ever-decreasing size of microelectronics, growing applications of superlattices, and development of nanotechnology, thermal resistances of interfaces are becoming increasingly central to thermal management. Although there has been much success in understanding thermal boundary resistance (TBR) at low temperat…
Advanced Thermoelectric Materials and DevicesThermal properties of materialsThermal Radiation and Cooling Technologies
Ibrahim S. Al-Mutaz、Ibrahim Ali Al-Anezi2004-01-01OpenAlex
Silica, SiO2, is typically found in well water supplies. Most of the silica found in well waters is a result of dissolving silica-containing rock. Silica content in brackish water is generally in the range of 20 to 60 ppm. In Salbukh water treatment plant, silica concentration of raw water is about 30 ppm. High concen…
Calcium Carbonate Crystallization and InhibitionMinerals Flotation and Separation Techniques
Yu‐Chung Chen、Yen‐Hwei Chang、Bin‐Siang Tsai2004-01-01MATERIALS TRANSACTIONS
Zn2SnO4, which has an inverse spinel structure, was adopted as the host material of a new green emitting phosphor. The photoluminescent (PL) properties of a series of europium-activated zinc stannate synthesized by vibrating milled solid state reaction have been investigated. One broaden emission band from the Zn2SnO4…
Luminescence Properties of Advanced MaterialsPerovskite Materials and ApplicationsGas Sensing Nanomaterials and Sensors
Yoshiaki Nishiya、Noriko Tamura、Tomohiro Tamura2004-01-01Bioscience Biotechnology and Biochemistry
The NADP(+)-preferring glucose dehydrogenase from thermoacidophilic archaeon Thermoplasma acidophilum has been characterized, and its crystal structure has been determined (Structure, 2:385-393, 1994). Its sequence and structure are not homologous to bacterial NAD(P)(+)-dependent glucose dehydrogenases, and its molecu…
Protein Structure and DynamicsMicrobial Metabolic Engineering and BioproductionEnzyme Structure and Function
S. M. Chabane Sari、P. J. Debouttière、Roger Lamartine 等 9 位作者2004-01-01Journal of Materials Chemistry
It is shown that chromophores can be efficiently grafted on nanometer sized gold particles dispersible in an aqueous solution. The grafting is carried out in two steps: first, a primary grafting of thiols consisting both of stabilisers (2-mercaptoethane sulfonate and thiomaleic acid) and of linker molecules (4-mercapt…
Gold and Silver Nanoparticles Synthesis and ApplicationsElectrochemical Analysis and ApplicationsNanocluster Synthesis and Applications
Sung Wng Kim、Yoshisato Kimura、Yoshinao Mishima2004-01-01Science and Technology of Advanced Materials
Phonon glass and electron crystal (PGEC) thermoelectric materials have been expected to be a new class of thermoelectric materials for high temperature applications. Among the efforts to optimize the high temperature thermoelectric properties of various PGEC thermoelectric materials, recent experimental works on the S…
Advanced Thermoelectric Materials and DevicesIntermetallics and Advanced Alloy PropertiesHeusler alloys: electronic and magnetic properties
Loredana Magistri、Mario L. Ferrari、Alberto Traverso 等 5 位作者2004-01-01OpenAlex
A Solid Oxide Fuel Cell-Hybrid System is mainly composed of three parts: the stack, the anodic recirculation system with fuel feeding, and the cathodic side (air side) where turbomachinery and heat exchangers are installed. In Part A of this work the transient models of the fuel cell are described, while in Part B the…
Advancements in Solid Oxide Fuel CellsChemical Looping and Thermochemical ProcessesCatalysis and Oxidation Reactions
C. M. Tian、Hongqiang Qu、Wei Wu 等 5 位作者2004-01-01Journal of Fire Sciences
The thermal degradation in air of flexible PVC treated with various metal chelates containing Fe, Co, Ni, Cu, or Zn combined with two compounds Al(OH) 3 and Mg(OH) 2 , have been studied by differential thermal analysis and thermogravimetry from ambient temperature to 1023 K. The kinetic parameters were obtained using…
Polymer Nanocomposites and PropertiesFlame retardant materials and propertiesPolymer Science and PVC
Takeshi Serizawa、Keiko Yamashita、Mitsuru Akashi2004-01-01Journal of Biomaterials Science Polymer Edition
Isotactic (it) and syndiotactic (st) poly(methyl methacrylate)s (PMMAs) were assembled on a poly(ethylene terephthalate) cell disk (as a solid substrate), which is normally used for cell culture, to produce ultrathin stereocomplex films. Static contact angles of the films using air bubbles in aqueous phase revealed th…
Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesPolymer Surface Interaction Studies
M. Warrier、R. Schneider、Emppu Salonen 等 4 位作者2004-01-01Physica Scripta
The graphite used in fusion devices as first wall material is porous and consists of granules and voids. The 1–10 µm granules are further composed of graphitic micro-crystallites (5–10 nm), which are separated by micro-voids. Understanding the hydrogen transport and trapping in such granules is an important aspect of…
Nuclear Physics and ApplicationsMuon and positron interactions and applicationsGraphite, nuclear technology, radiation studies
Enis S. Džunuzović、Srba Tasic、Branislav Bozic 等 5 位作者2004-01-01Journal of the Serbian Chemical Society
A series of acrylate functionalized samples based on hyperbranched hydroxy-terminated polyesters with different molecular weights and different degrees of acrylation were synthesized. The obtained urethane acrylates were slightly yellow viscose liquids. Their composition was characterized by FTIR and 1H-NMR spectrosco…
Epoxy Resin Curing ProcessesDendrimers and Hyperbranched PolymersSynthesis and properties of polymers
Y. G. Zhao、Yunhong Liang、Qingdong Qin 等 5 位作者2004-01-01ISIJ International
The cast hot working die steel is treated by mechanical vibration (MV) with a frequency of 50 Hz during the solidification process. The experimental results indicate that the MV may break off the dendrites growing from mould wall towards center in the steel during solidification. Therefore, the growth of the dendrites…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Yeong Kim、Young Dae Kwon、Kwang Lee 等 6 位作者2004-01-01Molecular Crystals and Liquid Crystals
N,N′-Diethyl-3,3′-bicarbazyl(DEBC)and N,N′-Diphenyl-3,3′-bicarbazyl(DPBC)was synthesized by the oxidative coupling reaction. The electrochemical properties of DEBC and DPBC were characterized by cyclic voltammetric technique. The oxidation of DEBC occurred at 0.56 V and 0.8 V(vs. Ag/Ag+)and the reduction also at 0.47…
Conducting polymers and applicationsElectrochemical Analysis and ApplicationsAnalytical Chemistry and Sensors
Pankaj Y. Patil、W.J. van Ooij2004-01-01Journal of Adhesion Science and Technology
We have explored the effect of the presence of the sulfide layer on the corrosion performance of sulfidized brass-coated steel cords extracted from tires and squalene formulations. The corrosion performance of sulfidized brass cords extracted from various rubber formulations was tested in 3% NaCl electrolyte solution…
Asphalt Pavement Performance EvaluationCorrosion Behavior and InhibitionConcrete Corrosion and Durability
Sudip Ray、Anil K. Bhowmick2004-01-01Polymer Engineering and Science
Abstract An extensive study on dynamic mechanical thermal analysis has been carried out to investigate the effect of filler‐filler and polymer‐filler interaction in cured ethylene‐octene copolymer reinforced by unmodified and modified silica. The silica was treated with trimethylolpropane triacrylate (TMPTA) or trieth…
Polymer Nanocomposites and PropertiesPolymer Nanocomposite Synthesis and IrradiationSilicone and Siloxane Chemistry
Pan Yue-Wu、Qu Sheng-Chun、Chunxiao Gao 等 8 位作者2004-01-01Chinese Physics Letters
In-situ energy dispersive x-ray diffraction on ZnS nanocrystalline was carried out under high pressure by using a diamond anvil cell. Phase transition of wurtzite of 10 nm ZnS to rocksalt occurred at 16.0 GPa, which was higher than that of the bulk materials. The structures of ZnS nanocrystalline at different pressure…
Quantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin FilmsCopper-based nanomaterials and applications
M. Mayer、V. Rohde、T. P tterich 等 7 位作者2004-01-01Physica Scripta
This paper summarizes observations about net carbon erosion and re-deposition in the limiter tokamak TEXTOR, and the divertor tokamaks ASDEX Upgrade and JET. The major carbon source in TEXTOR is the toroidal graphite belt limiter. Eroded carbon is mainly re-deposited on net deposition dominated areas of that limiter,…
Magnetic confinement fusion researchFusion materials and technologiesNuclear Materials and Properties