Qiming Zhang2014-02-01OpenAlex
Abstract : The objective of this ONR program is to develop fundamental understanding on the material requirement of dielectric polymers in order to achieve high energy density with low loss and high dielectric strength. On the material front, the objective is to design and develop dielectric polymers of high energy de…
High voltage insulation and dielectric phenomenaDielectric materials and actuatorsSynthesis and properties of polymers
Jong-Jin Kim2014-02-01Scholarworks@UNIST (Ulsan National Institute of Science and Technology)
Atomistic modelling and experimental observation has been conducted in order to investigate the early stage oxidation/corrosion behavior on nickel-base alloy in nuclear power plants.In order to fundamental study for the oxidation phenomena on the nickel, high resolution X-ray reflectivity is adopted.To examine the ato…
High-Temperature Coating BehaviorsRadioactive element chemistry and processingNuclear Materials and Properties
최종운、박재우、강계명2014-02-01Journal of the Korean institute of surface engineering
Nanoindentater tests were conducted to conducted nanoindentation microhardness of the individual phase of ferrite and martensite of 680MPa dual-phase (DP) steel charged with hydrogen. Hydrogen was charged by electrochemical method with current densities of 150, 200 mA/cm² for charging times of 5, 10, 25, 50 hours, res…
Hydrogen embrittlement and corrosion behaviors in metalsWelding Techniques and Residual StressesEngineering Applied Research
P. S. Sahoo、B. B. Mohanty、R. N. P. Choudhary2014-02-01Advanced Materials Letters
The advent of nanoscience & technology have completely changed the orientation/direction of studies of eco-friendly (lead-free) materials bringing them at the forefront of scientific developments with considerably enhanced physical properties suitable for a wide variety of challenging applications. Barium based ferroe…
Ferroelectric and Piezoelectric MaterialsElectronic Packaging and Soldering TechnologiesMetallurgical and Alloy Processes
Scott Alan Roberts、Peter Schunk2014-02-01OpenAlex
Ductile metals and other materials typically deform plastically under large applied loads; a behavior most often modeled using plastic deformation constitutive models. However, it is possible to capture some of the key behaviors of plastic deformation using only the framework for nonlinear elastic mechanics. In this p…
Microstructure and mechanical propertiesMetal Forming Simulation TechniquesHigh-Velocity Impact and Material Behavior
Randall O. Gauntt、Patrick D. Mattie、Nathan E. Bixler 等 9 位作者2014-02-01OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information)
This paper describes the knowledge advancements from the uncertainty analysis for the State-of- the-Art Reactor Consequence Analyses (SOARCA) unmitigated long-term station blackout accident scenario at the Peach Bottom Atomic Power Station. This work assessed key MELCOR and MELCOR Accident Consequence Code System, Ver…
Nuclear reactor physics and engineeringNuclear Materials and PropertiesRisk and Safety Analysis
Anna A. Lyamkina、Sergey P. Moshchenko、Yu. G. Galitsyn 等 8 位作者2014-02-01SibFU Digital Repository (Siberian Federal University)
In this work we present a theoretical analysis of plasmon nanoantennas for a diamond cluster\ncontaining a bright NV center. The results are obtained by the numerical simulations using the discrete\ndipole approximation. A gold shell around the diamond core is considered as antenna. It is shown\nthat by varying the si…
Quantum Information and CryptographyGold and Silver Nanoparticles Synthesis and ApplicationsPlasmonic and Surface Plasmon Research
Nima Yazdian、F. Karimzadeh、M. Tavoosi2014-02-01OpenAlex
In this paper the fabrication and precipitation hardening behavior of bulk nanostructure Al7075 alloy is investigated. In order to produce this alloy, the elemental powder based on the nominal composition of conventional Al7075 alloy is milled up to 15 h and then hot pressed. The milled and hot pressed samples are cha…
Metal and Thin Film MechanicsAdvanced materials and compositesMetallurgical and Alloy Processes
Prashant Ambekar、Jasmir Randhawa、K. Singh2014-02-01Advanced Materials Letters
In the present investigation, LiNbO3 dispersed Li2CO3 composite of varying volume fraction is prepared. Its validity of placement in ionic conductor is verified by determining ionic transference number by Wagner’s dc polarization technique and bulk electrical conductivity is estimated with complex impedance spectrosco…
Advancements in Solid Oxide Fuel CellsGas Sensing Nanomaterials and SensorsSmart Materials for Construction
Feng Tang、Yi Qian、Yi Huang2014-02-01Applied Mechanics and Materials
Under the condition of Baader aging, the chemical composition variation and the influence of transformer oil aging on electrical properties such as dielectric loss factor and physic-chemical properties such as interfacial tension were studied in the aging precess. Moreover, the correlation between hydrogenated transfo…
High voltage insulation and dielectric phenomenaPower Transformer Diagnostics and InsulationLubricants and Their Additives
Meng Jia、Jian Ma2014-02-01Advanced materials research
0.95(Na0.95-xKxLi0.05)(Nb0.90Sb0.05Ta0.05)O3-0.05KNbO3 lead-free piezoelectric ceramics were prepared by the conventional solid-state sintering method, the effects of K/Na ratio on the structure and electrical properties of the ceramics were studied in detail. The results show that the addition of the pre-calcined KNb…
Ferroelectric and Piezoelectric MaterialsAcoustic Wave Resonator TechnologiesMicrowave Dielectric Ceramics Synthesis
Liu Chao Qiu2014-02-01Advanced materials research
We applied the discrete element method (DEM) to analyze the normal impact properties of elastoplastic spherical particles. DEM simulation of impact between two identical elastoplastic spheres is carried out to validate the proposed model. The numerical results show well agreement with the FEM solution. Based on this m…
Landslides and related hazardsGranular flow and fluidized bedsHigh-Velocity Impact and Material Behavior
Jeremy S. Knopp、Ryan D. Mooers、Shamachary Sathish 等 4 位作者2014-02-01OpenAlex
Abstract : Benchmark and validation studies are presented that quantify the accuracy of computational models. An important factor in these studies is the ability to compare simulated impedance results with experimental data. In a majority of differential benchmark studies the data acquisition is handled by a commercia…
Magnetic Properties and ApplicationsNon-Destructive Testing Techniques
Jun Han、Quan Feng Gu、Shu Xiang Wu 等 5 位作者2014-02-01Key engineering materials
An unanticipated sideeffect of China’s developing economy was the increase in heavy road trafficvehicles utilizing high pressure tires on both new and old infrastructure.Today the extent of rutting has become one of the main forms of asphalt road surfacebreakage. To improve the robustness and high temperature properti…
Asphalt Pavement Performance EvaluationPolymer composites and self-healingInfrastructure Maintenance and Monitoring
Omid Reza Roustapour、Kamalodin Mozaffari、Ali Reza Tahhavor2014-02-01DergiPark (Istanbul University)
Özet: Konvansiyonel üretim yapan bazı işletmelerde salma sulama borusunun önüne bırakılan kapalı çuval içindeki mineral gübrenin çözünerek sulama suyuna eklenmesi tercih edilen bir yöntemdir ve sonuçları tartışmaya açıktır.Bu çalışmada sulama suyuna kontrollü olarak mineral gübre verebilmek amacıyla bir makine tasarla…
Textile materials and evaluationsGreenhouse Technology and Climate Control
John B. Schlager、Matt D. Brubaker、Kris A. Bertness 等 4 位作者2014-02-01Physica status solidi. C, Conferences and critical reviews/Physica status solidi. C, Current topics in solid state physics
Abstract Photoluminescence (PL) efficiencies were estimated for individual silicon‐doped GaN nanowires grown by plasma assisted molecular beam epitaxy (PAMBE). Steady‐state PL measurements reveal efficiencies that depend on excitation intensity, temperature, and nanowire morphology. While many nanowires had their best…
ZnO doping and propertiesGaN-based semiconductor devices and materialsGa2O3 and related materials
Yi Meng、Hong Li Suo、Hui Tian 等 7 位作者2014-02-01Advanced materials research
Ni8W alloy ingots were prepared by SPS technic, followed by homogenizing, cold rolling and recrystallization annealing. The influence of ball milling on cold rolling and cube texture formation of Ni8W alloy substrates was investigated during the course of preparation. Finally, high quality cube-textured Ni8W alloy sub…
Metal and Thin Film MechanicsCopper Interconnects and ReliabilityMetallurgical and Alloy Processes
Yee Song Ko、Takuya Yamamoto、Yasuyuki Tezuka2014-02-01Macromolecular Rapid Communications
Front Cover: Unprecedented tetracyclic polymer topologies having a spiro- and a bridged-type, quatrefoil form are effectively constructed through an alkyne-azide, click linking reaction by employing a kyklo-telechelic poly(tetrahydrofuran), poly(THF), precursor with an azide group, obtained through an electrostatic se…
Electrospun Nanofibers in Biomedical ApplicationsGraphene and Nanomaterials Applications
Rachid Assel、Mouez Dimassi、Claudio Fernández2014-02-01Mathematics and Statistics
The main purpose of this note is to study spectral properties of the Stark magnetic Hamiltonian : , on the Hilbert space L2(R2). We show that if the potential V satisfies some mild regularity conditions and is sufficiently decaying at infinity, then the operator H(μ, ϵ) has possibly at most a finite number of eigenval…
Matrix Theory and AlgorithmsSpectral Theory in Mathematical PhysicsLanthanide and Transition Metal Complexes
Hongsu Park、YoungWoong Moon、Duck‐Kyun Choi2014-02-01Current Nanoscience
Using an a–InGaZnO(amorphous-IGZO) n-type semiconducting material, a vertically operating two terminal metalsemiconductor- ferroelectric-metal (MSFM) non-volatile resistive switching structure has been investigated. PZT thin film of composition Zr/Ti=10/90 was prepared by spin-coating method on the Pt/Ti/SiO2/p-Si(100…
Advanced Memory and Neural ComputingThin-Film Transistor TechnologiesTransition Metal Oxide Nanomaterials