Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 220766 / 251002 页 · 当前展示 4,415,301–4,415,320 / 5,020,026 条匹配结果 · 摘要仅作预览

Study on Preparation and the Morphology Character of Electrodeposited Aluminum Coating on Q235 Steel

Wang Hu2014-01-01Cailiao daobao

The electrodeposited aluminum coating on Q235steel was obtained by electrodepositing in inorganic molten salt of AlCl3-NaCl-KCl with 1070aluminum as anode at 150℃,and the effects of electrodepositing parameters on surface morphology of aluminum coating were studied.SEM analysis shows that,with increasing of current de…

Electrodeposition and Electroless CoatingsAnodic Oxide Films and Nanostructures

Synthesis and Application of Monopolyethylene Glycol Malcate as Lithium-ion Battery Slurry Dispersant

Ren Yu2014-01-01Synthetic Materials Aging and Application

Monopolyethylene glycol maleate was synthesized by decompression melting method,and the synthetic process was discussed. Five factors were optimized,including alcohol acid mole ratio,amount of catalyst,inhibitor dosage,reaction temperature and reaction time,designing L16( 45) for orthogonal experiment. The best condit…

Advanced ceramic materials synthesisSynthesis and properties of polymersPolymer Synthesis and Characterization

Study on the Physical and Chemical Properties of Several Straw Fiber

LI Li-xi2014-01-01Dadou kexue

In order to improve the additional value and the comprehensive utilization of straw. In this paper,physic-chemical properties and mechanical pulping characteristics of several kinds of straw fibers were studied. Straw fiber morphology was determined by Leica microscope,statistical analysis of the length,width and leng…

Natural Fiber Reinforced CompositesAdvanced Cellulose Research StudiesAgricultural Engineering and Mechanization

Effects of sericine on neuropeptide Y expression in islet cells of type 2 diabetes mellitus rats

Liu Pin2014-01-01Zhongguo laonianxue zazhi

Objective To observe the effects of sericine on neuropeptide Y( NPY) expression in islet cells of type 2 diabetes mellitus rats. Methods Methods 36 male SD rats were randomly divided into 3 groups with 12 rats in each group: normal control,diabetes mellitus model and sericine treatment groups. Type 2 diabetes mellitus…

Neuropeptides and Animal PhysiologyPancreatic function and diabetesSupramolecular Self-Assembly in Materials

Crushing process simulation for brittle zone of shell material with different offset

LI De-yua2014-01-01Shenyang Gongye Daxue xuebao

In order to optimize the processing scheme for the brittle zone of shell material,increase the lethality of projectile and enhance the utilization ratio of material,the fracture processes for the alloy steel specimens with no brittle zone,asymmetrical distribution brittle zone and offset-containing crisscross brittle…

Metal Forming Simulation TechniquesMetallurgy and Material FormingHigh-Velocity Impact and Material Behavior

Inorganic/Organic Composite Proton Exchange Membrane Based on P_2O_5/SiO_2 and SPEEK

Zhou Daow2014-01-01OpenAlex

Two kinds of inorganic/organic membranes were fabricated via mixing the P2O5/SiO2powder and sol prepared by sol-gel method with SPEEK,respectively.The morphology,mechanical properties and proton conductivity of the membranes were studied.In contrast with the pure SPEEK membrane,the proton conductivity of the composite…

Fuel Cells and Related MaterialsConducting polymers and applicationsMembrane-based Ion Separation Techniques

Development of PCR Diagnostic Method and Clinical Sample Detection for Pig Proliferative Enteropathy

Guo Jian-cha2014-01-01OpenAlex

To research the epidemicology of the pig proliferative enteropathy(PPE)in different parts of Guangdong and at different ages of pig.In our paper,apolymerase chain reaction(PCR)was designed to diagnose PPE.The prevalence of PPE was confirmed as 16.29%in pigs in Guangdong.The infective rate was 8.6%,11.90%,25.48%,0.57%,…

Mycobacterium research and diagnosisVeterinary medicine and infectious diseasesMetallurgy and Material Science

Effect of 308 nm Excimer Laser on TNF-α,bFGF in the Skin Tissue Fluid of Patients with Vitiligo Vulgaris in Stable Stage

PI Xiao-bin2014-01-01Journal of Diagnosis and Therapy on Dermato-venereology

Objective: To evaluate the influence of the 308 nm excimer laser on the level of the tumor necrosis factor-α( TNF-α) and the basic fibroblastic growth factor( bFGF) in the skin tissue fluid of patients with vitiligo vulgaris in stable stage. Methods: 28 patients with vitiligo vulgaris in stable stage receiving autolog…

melanin and skin pigmentationLaser Applications in Dentistry and MedicineSilk-based biomaterials and applications

First-principles Investigation of the Epitaxial Strain Effects on the Electronic Structure of LaAlO_3

XU Li-chu2014-01-01Journal of Beijing University of Technology

The epitaxial strain effects and Born effective charge of the cubic LaAlO3( LAO) are investigated,using the first-principle based on density functional theory. From the results of the density of states( DOS) Mulliken distributions of LAO,the La-d,Al-s,p and O-p are predominant role of orbital electrons,and Al-O orbita…

ZnO doping and propertiesGas Sensing Nanomaterials and SensorsAcoustic Wave Resonator Technologies

Application of Diatomite in Paper Coatings

B Latex2014-01-01OpenAlex

Diatomite was used to partially substitute coarse ground calcium carbonate( GCC) to produce coated matte and dull papers. The effects of diatomite on the paper gloss,printing gloss,dry pick,and ink setoff rate were studied. The use of diatomite in paper coating can reduce the paper gloss effectively without increasing…

Advanced Cellulose Research StudiesCultural Heritage Materials AnalysisMaterial Properties and Processing

Advances in research on modified ZSM-5 molecular sieves for conversion of methanol to olefins

Pan Hongya2014-01-01OpenAlex

This paper summarizes the recent developments of methanol-to-olefin(MTO/MTP) conversion over ZSM-5 molecular sieves,including synthesis mechanism of MTO/MTP,influence of pore structure and surface acid of ZSM-5 on its catalytic activity for MTO/MTP conversion,as well as modification of molecular sieve. The review focu…

Catalytic Processes in Materials ScienceZeolite Catalysis and SynthesisMesoporous Materials and Catalysis

Research on gel characteristics in PAN dope of Polyacrylonitrile based carbon fiber precursor

Don Liu2014-01-01OpenAlex

This article explores the influence of temperature and residence time on the formation process of gel in the dope of polyacrylonitrile fiber through the contrast test, and the further research on the effects of gel itself properties to dope characteristics were carried out, so as to fully grasp the nature of the gel.

Electrospun Nanofibers in Biomedical ApplicationsFiber-reinforced polymer compositesGraphene and Nanomaterials Applications

Effect of Injection Molding Parameters on Residual Stress of Polycarbonate

GE Yon2014-01-01Cailiao gongcheng

The influences of injection molding parameters on the residual stress of polycarbonate specimens were investigated by using orthogonal method.The results show that the most significant factor is melt temperature followed by cooling time and mold temperature,and the injection pressure has less influence.Because of the…

Polymer crystallization and propertiesInjection Molding Process and PropertiesPolymer Foaming and Composites

Enhancing Foaming Properties of Ovalbumin by Enzymatic Modification

Huang Qu2014-01-01Food Science

The foaming properties of ovalbumin were enhanced by enzymatic modification with alkaline proteinase.The effects of some reaction conditions such as enzymatic treatment time,substrate concentration and alkaline proteinase concentration on foaming capability and foaming stability of ovalbumin were investigated.Based on…

Proteins in Food Systemsbiodegradable polymer synthesis and propertiesPickering emulsions and particle stabilization

Effect of Extraction Methods on Physico-chemical Properties of Collagen from Tilapia Shin

Hao Shuxia2014-01-01Food Science

The purpose of this work is to compare the physico-chemical properties of collagen extracted from tilapia skin by different methods, hot water extraction, acid extraction and ultrasonic-assisted enzymatic extraction. The collagens exhibited distinctive absorption peaks in the wavelength range of 220–232 nm. There was…

Collagen: Extraction and Characterization

Anti-fogging Property and Synthesis of TiO_2 Nano-films by Microwave Method

Guan Lingxia2014-01-01OpenAlex

The TiO2 sols are prepared by the method of microwave heating in which tetrabutyl titanate and ethanol as the materials,then pull the films on the common glass substrates by dip-coating method. The anti-fogging property of the films is tested.The results show that,the microwave can lead the reaction system warming uni…

Catalytic Processes in Materials ScienceGas Sensing Nanomaterials and SensorsAerogels and thermal insulation

Formula Optimization of Anodizing Electrolyte and Anodic Oxide Film Performance of Magnesium Alloys

Ju Zhang2014-01-01OpenAlex

To improve the corrosion resistance of anodic oxide film of magnesium alloy,thickness of the oxide film was used as main index to determine the optimal electrolyte composition. Surface morphology and corrosion resistance of the film were studied by drip experiment,scanning electron microscopy( SEM)and potentiodynamic…

Corrosion Behavior and InhibitionMagnesium Alloys: Properties and ApplicationsAnodic Oxide Films and Nanostructures

Benefit for the analysis of P-T limit curve of a home-made RPV using RT_(T_0) instead of RT_(NDT)

Cao Yupen2014-01-01Nuclear Techniques

Background: The leak test temperature and startup and shutdown pressure-temperatue(P-T) limits for reactor pressure vessel are specified in the ASME code and in the U.S. Part 50 to Title 10 of the Code of Federal Regulations. The ASME Code Case N-629 has been integrated into the 2013 ASME code. The KIc curves indexed…

Nuclear reactor physics and engineeringGraphite, nuclear technology, radiation studiesNuclear and radioactivity studies

Carbide evolution of MC5 cold roller steel in the process of austenitizing

Jin Li Xu2014-01-01Materials Science and Technology

To study carbide dynamic evolution law in the process of austenitizing further,the influence of different austenitizing time on microstructure and hardness were studied using scanning electron microscopy( SEM), X-ray diffraction analysis and hardness test. The results show that,as the austenitizing time increases from…

Microstructure and Mechanical Properties of SteelsAdvanced materials and compositesMetal Alloys Wear and Properties

Test and Analysis of Yarn-dyed Tablecloth Fabric Performance

Ya Gao2014-01-01OpenAlex

This paper discusses the design and development of yarn-dyed tablecloth fabrics. The style and characteristics of the fabric series have been shown in different color, organizational change and weaving process.Meanwhile, the performance of the newly developed fabrics has been tested and the result has been compared an…

Textile materials and evaluations