Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
In situpreparation of polyether amine functionalized cross-linked multiwalled carbon nanotube (MWCNT) nanofillers may improve the thermal and mechanical properties of the composites in which they are used as reinforcing agents. The reduction and functionalization of MWCNT using ethylenediamine in the presence of polye…
Molecular dynamics simulation has been performed for investigating the glass transition of Pd-Ni alloy nanoparticles in the solidification process. The results showed that the Pd-Ni nanoparticles with composition far from pure metal should form amorphous structure more easily, which is in accordance with the results o…
α-Fe2O3nanocrystallines were prepared by direct transformation via high energy ball milling treatment forα-FeOOH powder. X-ray diffraction, Rietveld analysis, TEM, and vibrating sample magnetometer (VSM) are used to characterize the samples obtained after several milling times. Phase identification using Rietveld anal…
Improving the compatibility between flame retardant and asphalt is a difficult task due to the complex nature of the materials. This study explores a low dosage compound flame retardant and seeks to improve the compatibility between flame retardants and asphalt. An orthogonal experiment was designed taking magnesium h…
By theoretical calculation, the external force on the particle conveyed by pad asperities and the molecular adhesion force between particle and wafer are compared and analyzed quantitatively. It is confirmed that the molecular adhesion force between particle and wafer has a great influence on the chemical mechanical p…
The characteristics of the dry etching of SiNx:H thin films for display devices using SF6/O2 and NF3/O2 were investigated using a dual-frequency capacitively coupled plasma reactive ion etching (CCP-RIE) system. The investigation was carried out by varying the RF power ratio (13.56 MHz/2 MHz), pressure, and gas flow r…
This study investigated the influence of layered double hydroxides (LDHs) on the fatigue properties of asphalt mixture. In this paper, different aging levels (thin film oven test (TFOT) and ultraviolet radiation aging (UV aging for short)) of bitumen modified with various mass ratios of the LDHs were investigated. The…
The mechanical property of coal, influencing mining activity considerably, is significantly determined by the natural fracture distributed within coal mass. In order to study the effecting mechanism of bedding structure on mechanical property of coal, a series of uniaxial compression tests and mesoscopic tests have be…
The utilization of nanostructure graphene thin films as electron transfer layer in dye-sensitized solar cells (DSSCs) was demonstrated. The effect of a nanostructure graphene thin film in DSSC structure was examined. The nanostructure graphene thin films provides a great electron transfer channel for the photogenerate…
The influence of different cooling regimes (quenching in water and cooling in air) on the residual mechanical properties of ECC (engineered cementitious composites) exposed to high temperature up to 800°C was discussed in this paper. The specimens quenching in water gained better mechanical properties than the ones co…
Main crack propagation process in polycrystalline materials is very complex due to intercrystalline sliding mechanism effects. Multiple factors make it considerably difficult to analyze the state of stresses in the crack tip within the theoretical scope of linear fracture mechanics (LFM). As a basis for the suggested…
A possible application of excimer laser irradiation for the preparation of surface enhanced Raman spectroscopy (SERS) substrate is demonstrated. A polyimide foil of 125 μm thickness was irradiated by 240 pulses of focused ArF excimer laser beam (λ= 193 nm, FWHM = 20 ns). The applied fluence was varied between 40 and 8…
The hollow nanofibers of Ce0.8Gd0.2O2−δ(GDC20) were electrospun from the PVP and nitrate precursors. The evolution of hollow channel was investigated by TG-DTA and ex situ TEM for the fibers heated at 250–300°C for 1–5 h. The hollow cores were revealed during the crystallization of nano-GDC20 and the PVP decomposition…
Quality tests applied to hydraulic concrete such as compressive, tension, and bending strength are used to guarantee proper characteristics of materials. All these assessments are performed by destructive tests (DTs). The trend is to carry out quality analysis using nondestructive tests (NDTs) as has been widely used…
The present study was designed to improve the mechanical performance of a small-diameter vascular prosthesis made from a flexible membrane of poly(ε-caprolactone) (PCL). PCL reinforcement was achieved by embedding a tubular fabric knitted from polyethylene terephthalate (PET) yarns within the freeze-dried composite st…
Evaluation of the liquefaction potential of a liquefaction-prone area is important for geotechnical earthquake engineering, both for assessment for site selection and for planning and new constructions. The liquefaction potential index for the city of Duzce in northwestern Turkey using the empirical relationships betw…
Concrete beams were strengthened by wrapping the shear edges of the beams twice at 45° in opposite directions by either carbon fiber reinforced polymer (CFRP) or glass fiber reinforced polymer (GFRP). The study included 3 CFRP wrapped beams, 3 GFRP wrapped beams, and 3 control beams, all of which were 150 × 250 × 2200…
Three wires, Au, Cu, and Ag-Au-Pd, were bonded on an Al pad, inducing IMC growth by a 155 hr high temperature storage (HTS) so that the electrical resistance was increased and critical fusing current density (CFCD) decreased. Observations of the Ag-Au-Pd wire after HTS (0–1000 hr) indicated that IMC between the Ag-Au-…
The model of milling force is mainly proposed to predict and analyze the cutting process based on finite element method in this paper. Firstly, milling finite element model is given based on orthogonal cutting principle, and then the influence laws of cutting parameters on chip formation are analyzed by using differen…