K. (Karel) Soukup、P. (Pavel) Topka、V. (Vladimír) Hejtmánek 等 4 位作者2014-01-01ASEP
Our study is focused on the preparation of electrospun nanofibrous support based on poly(2,6-dimethyl-1,4-phenylene oxide) (PPO). Electrospun PPO support with the mean fiber diameter 150 nm exhibited high porosity (80%) and suitable transport properties. Platinum and palladium catalysts were supported on electrospun n…
Electrospun Nanofibers in Biomedical ApplicationsNanomaterials for catalytic reactionsCatalytic Processes in Materials Science
Selma Özabdal2014-01-01Hitit University Institutional Repository
Bu çalışmada, optimum soğuk sarı kaplama koşulları belirlenerek, soğuk sarı kaplamanın zamak-5'in korozyonuna etkisi araştırılmıştır. Soğuk sarı kaplama koşullarının berlirlenmesinde optimum sıcaklık, akım, süre ve banyo bileşim parametreleri belirlenmiştir. Zamak-5 üzerindeki zemin kaplama olarak kullanılan soğuk sar…
Magnesium Alloys: Properties and ApplicationsCorrosion Behavior and InhibitionMetallurgy and Material Science
L. (Lubomír) Pospíšil、E. (Eva) Kaletová、A. (Anna) Kohutová 等 8 位作者2014-01-01ASEP
-
Electrodeposition and Electroless CoatingsElectrochemical Analysis and ApplicationsElectron and X-Ray Spectroscopy Techniques
I. (Ivan) Tomáš、S. Vejvoda、O. Kovařík2014-01-01ASEP
Main principles of the lately introduced method of Magnetic Adaptive Testing (MAT) are described. The method is applied to measurement of the fatigue damage level and residual lifetime of technical objects manufactured from ferromagnetic construction materials. The up-to-now existing experiments and experience gave sa…
Ultrasonics and Acoustic Wave PropagationNon-Destructive Testing TechniquesMagnetic Properties and Applications
J. Dumková、A. (Aleš) Hampl、M. (Marcela) Buchtová 等 4 位作者2014-01-01ASEP
In mice, the inhalation of PbO nanoparticles causes changes to the lung morphology that are typical for inflammation, and the strength of which is influenced by the nanoparticle concentration.
Air Quality and Health ImpactsNanoparticles: synthesis and applicationsInhalation and Respiratory Drug Delivery
ÜRKİYE AKAR TARIM2014-01-01Bursa Uludag University - AVESIS
Radyasyon dozimetrisi, radyasyon zırhlama ve radyasyon soğurma gibi gamma ışınlarının madde ile etkileşmelerinin ele alındığı alanlarda, gammaların gerçekleştirdiği çoklu saçılmalar, üzerinde durulması gereken önemli bir süreçtir. Bu nedenle, bu çalışmada deneysel veya analitik olarak elde edilmesi mümkün olmayan, 5.0…
Radiation Shielding Materials AnalysisNuclear Physics and ApplicationsGraphite, nuclear technology, radiation studies
A. Klyushina、F. Kovanda、K. (Květa) Jirátová 等 4 位作者2014-01-01ASEP
Supported Co3O4 catalysts were prepared by heating the cobalt hydroxide synthesized electrochemically on tainless steel sieve and by heating the commercial TiO2 tablets impregnated with cobalt nitrate solution; the catalysts were than modified with potassium promoter.
Catalytic Processes in Materials ScienceChemical Looping and Thermochemical ProcessesIndustrial Gas Emission Control
J. (Jana) Lišková、O. (Oleg) Babchenko、M. (Marián) Varga 等 7 位作者2014-01-01ASEP
In order to control the hydrophobic or hydrophilic character, the NCD film surfaces were grafted by hydrogen atoms (H-termination) or by oxygen atoms (O-termination). Human mesenchymal stem cells and primary human osteoblasts were used for biological studies on H- and O-terminated NCD films. We found that cells cultiv…
Polymer Surface Interaction StudiesGraphene and Nanomaterials ApplicationsDiamond and Carbon-based Materials Research
İSHAK KARAKAYA、Fuat Erden、Metehan Erdoğan2014-01-01AYBU AVESIS
Mg-Ni system draws attention due to the promising hydrogen storage properties of Mg2Ni. The proposed method involves the use of NiO and MgCl2 in an electrochemical cell to from Mg-Ni intermetallics directly. The electrodeoxidation of NiO was followed by combination of Mg and Ni in molten salt electrolytes. The product…
Magnesium Alloys: Properties and ApplicationsMolten salt chemistry and electrochemical processesHydrogen Storage and Materials
D. (Dita) Frankeová2014-01-01ASEP
The sample was delivered as the mortar fraction with grain size less than 0.063 microns. The proportion of mortar is generally regarded as a binder. To determine the quality of the binder thermal analysis and X-ray fluorescence were performed and insoluble residue in HCl. was found.
Geodetic Measurements and Engineering StructuresMagnesium Oxide Properties and ApplicationsRecycling and utilization of industrial and municipal waste in materials production
A. (Aleš) Podolník、M. (Michael) Komm、R. (Renaud) Dejarnac 等 4 位作者2014-01-01ASEP
Numerical simulations based on PIC technique like the SPICE2 model developed at IPP ASCR are often used in tokamak plasma physics to investigate the interaction of edge plasma with plasma-facing components. The SPICE2 model has been parallelised with the exception of the Poisson equation solver which considerably slow…
Fusion materials and technologiesParticle accelerators and beam dynamicsMagnetic confinement fusion research
R. (Roman) Doleček2014-01-01ASEP
The aim of this study is to design and prototype a lens that enable a decrease of the light intensity that radiate into forward direction (90°) and at the same time increase the FWHM of the irradiated pattern.
Advanced optical system designElectrowetting and Microfluidic TechnologiesMetamaterials and Metasurfaces Applications
Jelenković Rade2014-01-01Dr RGF - RGF Repository
M20
Clay minerals and soil interactionsGeological Formations and Processes ExplorationGeochemistry and Geologic Mapping
J. (Jakub) Plášil、J. (Jiří) Čejka、R. Škoda2014-01-01ASEP
A rare supergene Cu-Al sulfate, mineral chalcoalumite, has been found for the first time in the Czech Republic from Jáchymov. This supergene mineral was identified in the material originating from the Červená vein, Rovnost mine (Jáchymov) in an association with other supergene minerals, related by their origin to the…
Mine drainage and remediation techniquesCrystal Structures and PropertiesClay minerals and soil interactions
Z. (Zdeněk) Chlup、V. Lövy、I. (Ivo) Kuběna2014-01-01ASEP
The microstructure of ceramic based on the silicon nitride is usually consisting of mixed uniaxial and elongated beta grains. The numerical modelling of material behaviour (i.e. elastic constant calculation, stress concentration, crack initiation and propagation, damage evolution etc.) on the microstructural (grain) l…
Composite Material MechanicsAdvanced ceramic materials synthesisAdvanced Surface Polishing Techniques
J. (Jaroslav) Blažek、I. (Ivana) Sýkorová、M. (Martina) Havelcová2014-01-01ASEP
The article deals with carbonaceous material called black carbon and summarize information about its origin, occurrence, properties and determination.
Carbon and Quantum Dots ApplicationsPigment Synthesis and PropertiesMineralogy and Gemology Studies
J. (Jakub) Borovec、I. (Ivana) Matějíčková、L. (Lukáš) Vejřík 等 5 位作者2014-01-01ASEP
The occurrence of the green alga Cladophora and other macrophytes in the Brno reservoir was confirmed. The distribution of Cladophora stands was assessed as not dramatic, despite of the temporary occurrence of a mass of surface-floating filaments. This increase in buoyancy of the Cladophora colonies was caused by exce…
Diatoms and Algae ResearchBiocrusts and Microbial EcologyAquatic Ecosystems and Phytoplankton Dynamics
M. (Martin) Topiař2014-01-01ASEP
Objective of this work was to optimize the SFE from eucalyptus (Eucalyptus grandis L.) leaves, which find application both in medicine and as botanical insecticide. In particular, terpenes and terpenoids belong to active components of eucalyptus essential oil.
Subcritical and Supercritical Water ProcessesPhase Equilibria and ThermodynamicsPolymer Foaming and Composites
M. (Michal) Hlína、M. (Miroslav) Hrabovský、M. (Miloš) Konrád 等 5 位作者2014-01-01ASEP
Gasification of municipal solid waste was performed in the reactor equipped with a DC plasma torch (set up to 400 A and 290 V). The plasma torch involves the combination of a gas stabilized cathode part and a water stabilized arc part. Argon plasma is formed in the cathode part and then enters the part, where the arc…
Recycling and utilization of industrial and municipal waste in materials productionGraphite, nuclear technology, radiation studiesPlasma Applications and Diagnostics
B. (Bohuslav) Máša、L. (Luboš) Náhlík、P. (Pavel) Hutař2014-01-01ASEP
The main aim of this paper is an investigation of the crack behavior in the ceramics laminates. Especially, the problem of the estimation of the stress singularity exponent in such a material using different approaches is closely described. Since analytical approach is a suitable tool for two dimensional problems, int…
Advanced ceramic materials synthesisNumerical methods in engineeringMechanical Behavior of Composites