Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Abstract Fluoropolymers with adhesive and anticorrosive properties were investigated by blending statistical phosphonated copolymers with poly(vinylidene fluoride) (PVDF). In a first part, methacrylic monomers bearing dialkyl phosphonate and phosphonic acid groups were synthesized. Dimethyl(2‐methacryloyloxyethyl)phos…
Abstract Glycolide (GL) and ϵ‐caprolactone (CL) were copolymerized in bulk at relatively high temperatures using stannous octoate as a catalyst. To investigate the relationship among microstructure, thermal properties, and crystallinity, three series of copolymers prepared at various reaction temperatures, times, and…
A novel multilayer film is assembled from highly sulfonated polyaniline (SPAN) and diazoresin (DR) in aqueous solution via electrostatic attraction. Under UV irradiation, following the decomposition of diazonium group between the adjacent interfaces of the multilayer, the ionic bonds of the self-assembled film convert…
Temperature dependent nano-confined self-assembly has been observed for the crystallization of poly(ethylene oxide) (PEG) blocks within a hexagonally perforated layer in a PEO–polystyrene diblock cololymer. X-ray diffraction patterns in 2D wide and small angle X-ray scattering (WAXS/SAXS) do characteristically differ…
Abstract Symmetric polystyrene (PS)–poly(dimethylsiloxane) (PDMS) diblock copolymers were mixed into a 20% dispersion of PDMS in PS. The effect of adding the block copolymer on the blend morphology was examined as a function of the block copolymer molecular weight ( M n,bcp ), concentration, and viscosity ratio (η r )…
We have observed interference fringes of electrons in field emission patterns from multiwalled carbon nanotubes at 60 K. The observed fringe pattern is reproduced by calculations based on the formula of Young's interference of two beams. Three-beam interference has also been detected over short time periods. We discus…
The effect of intense laser irradiation on the features of Raman intensity of carbon nanotubes (CNT's) has been examined. The intensity of the D band decreases and the relative intensity between the G peaks changes with increasing laser power density (LPD) and remain unchanged with subsequent decrease in LPD. This beh…
Abstract A novel fluorinated diamine monomer based on 4,4′‐biphenol was synthesized via a straightforward, high‐yielding two‐step procedure. 4,4′‐Biphenol was reacted with 2‐chloro‐5‐nitrobenzotrifluoride in the presence of potassium carbonate to yield the intermediate dinitro compound, which was subsequently reduced…
The compound [Co(hfac)2-(NITPhOMe)2] (2) (hfac = hexafluoroacetylacetonate, NITPhOMe = 4'-methoxyphenyl-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide) crystallizes in the triclinic P1 space group, a= 10.870(5), b = 11.520(5), c = 19.749(5) A, alpha = 78.05(5), beta = 84.20(5), gamma = 64.51(5) degrees, Z = 2. It can b…
Abstract The correlation of chemical structure, crystalline morphology, and space charge distribution under a dc electrical field was investigated with three kinds of poly(propylene) (PP) with a different chemical structure, that is, homogeneous PP and block copolymer and random copolymer of PP. The space charge distr…
The stability of the ammonium phospho-molybdic Dawson-type salt (NH4)6P2Mo18O62·12H2O in aqueous solution has been studied. The polyanion P2Mo18O626− decomposes into the lacunar Keggin-type anion HxPMo11O39(7 − x)−, HxMo5P2O23(6 − x)−, phosphate and oxomolybdate species, regardless of the concentration and acid–base c…
Abstract The hydrazine/thiocyanate system was found to be an excellent solvent for cellulose. The solubility and solution properties were investigated. Even at room temperature, the combinations of hydrazine and lithium, sodium, and potassium thiocyanate had high dissolution power for cellulose, up to an 18% (w/w) max…
Abstract A laboratory‐sized two‐roll mill was used to incorporate rice husk ash into natural rubber (NR). A conventional vulcanization system was used for curing and cure studies were carried out on a Monsanto rheometer. Physical testing of the NR vulcanizates involved determining tensile and tear resistances and hard…
We present a novel way of synthesising highly ordered arrays of hollow Cd(1-x)Mn(x)S quantum wires with lateral dimensions of 3-4 nm separated by 1-2 nm SiO2 barriers by forming Cd(1-x)Mn(x)S (0 < or = x < or = 1) semiconductors inside the pore system of mesoporous MCM-41 SiO2 host structures. X-ray diffraction and tr…
We report the first ultrafast ring closure kinetics of the merocyanine ( MC ) of a reverse photochromic spiropyran 1‘,3‘,3‘-trimethyl-6,8-dinitrospiro[2H-1-benzopyran-2,2-indoline] (6,8-dinitro BIPS) and its 1‘-(2-carboxyethyl) substituted derivative. The reaction is fast and essentially over in a few hundred picoseco…
A material serving as both matrix and excitation source for atomic emission spectroscopy (AES) is presented in this article. Freshly etched porous silicon is doped with gadolinium nitrate to form an explosive solid, to be loaded with analyte and ignited by coil discharge (see Figure and also front cover for flash upon…
Abstract A nylon 1012/clay nanocomposite was prepared by melt polycondensation polymerization of diamine and diacid in the presence of organoclay. The nylon 1012 and nanocomposite were characterized by Fourier transform IR spectroscopy with attenuated total reflection, and a shift of the SiOSi band toward a lower wa…
Abstract In this study, the melting behavior of isothermally crystallized polytri‐ methylene terephthalate (PTT) was investigated. Multiple melting behaviors in DSC heating trace were found because two populations of lamellar stacks were formed during primary crystallization and the recrystallization at heating proces…
The first successful deposition of mesoporous vanadium oxide films and their application as high-rate cathode materials for lithium batteries are described in this communication. The novel electrochemical deposition process developed for the preparation of these films makes use of non-ionic surfactant templates. The F…
Using a combination of experimental techniques, we show that Cu(II) reduction by sulfide to Cu(I) occurs in solution prior to precipitation. EPR and 63Cu NMR data show that reduction to Cu(l) occurs during the reaction of equimolar amounts of Cu(II) with sulfide. 63Cu solution NMR data show that Cu(I) is soluble when…