Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 224179 / 314362 页 · 当前展示 4,483,561–4,483,580 / 6,287,227 条匹配结果 · 摘要仅作预览

OS1507 Investigating Effect of Film Thickness on Bending Deformation of Metal-Coated Nanowires

Yuhki TOKU、Mikio MURAOKA2014-01-01The Proceedings of the Materials and Mechanics Conference

In this study, we discussed about the effect of film thickness on bending deformation of coated nanowire (NW). The three dimensional theoretical model for analyzing the effect was proposed in this paper. The dependence of the misfit strain on the film thickness was introduced in the model. We concluded that bending di…

Advanced Sensor and Energy Harvesting MaterialsSynthesis and properties of polymersAnodic Oxide Films and Nanostructures

J0310202 Optimization of anodic aluminum oxide template and fabrication of Cu nanowire surface fastener

Kôhei KOJIMA、Yang Ju2014-01-01The Proceedings of Mechanical Engineering Congress Japan

Characteristic of nanowire is gradually attracting many researchers with potential applications of nano devices, nano sensors, solar sells and so on. This paper describes fabrication and evaluation of Cu nanowire surface fastener grown in porous aluminum. To fabricate nanowire surface fastener, at first anodic aluminu…

Anodic Oxide Films and Nanostructures

OS1741 Ejecta Size Distribution Resulting from Hypervelocity Impact on Curved Surfaces

Masahiro Nishida、Kôichi Hayashi、Kenta Nozaki 等 4 位作者2014-01-01The Proceedings of the Materials and Mechanics Conference

We examined ejecta size distribution when aluminum alloy 2017-T4 spheres with a diameter of 3.2 mm impacted aluminum alloy 6061-T6 targets with a plane surface and a curved surface at velocities of 4 km/s. We used a two-stage light-gas gun at the Institute of Space and Astronautical Science (ISAS)/Japan Aerospace Expl…

Planetary Science and ExplorationHigh-Velocity Impact and Material BehaviorSpace Satellite Systems and Control

J0610205 CAE Analysis of Surface Structure Effect for Hydrocarbon Reforming on SOFC Anode

Yuya Tachikawa、Yusuke Shiratori、Masaru Takada 等 5 位作者2014-01-01The Proceedings of Mechanical Engineering Congress Japan

Direct internal reforming solid oxide fuel cell (DIR-SOFC) can keep the homogenous temperature distribution on the cell surface to control the heat generation by Joule heat and endothermic heat by hydrocarbon fuel reforming. However, reforming reaction is concentrated around the flow inlet side because the fuel is rap…

Perovskite Materials and ApplicationsAdvancements in Solid Oxide Fuel CellsFuel Cells and Related Materials

Spider Silk Advancements

Brittany Patterson2014-01-01Digital Commons - USU (Utah State University)

Spider silk has many potential biomedical uses. Currently, synthetic spider silk is produced in goat milk via the pBC1 expression system. The extraction process associated with these proteins is long and difficult and the yields are not optimal. The focus of this project is to create goats that produce higher yields o…

Silk-based biomaterials and applicationsSilkworms and Sericulture Research

Planar broadband terahertz metamaterial absorber using single nested resonator

Yuhua Wen、Wanli Ma、Joe Bailey 等 6 位作者2014-01-01UCL Discovery (University College London)

We report a broadband terahertz metamaterial absorber with two nested back-to-back split-ring resonators constituting a single planar resonator. Bandwidths of 0.66THz and 0.98THz with the absorptivity above 0.8 and 0.6 were experimentally obtained respectively. CLEO:2014 © 2014 OSA.

Metamaterials and Metasurfaces ApplicationsMicrowave Engineering and WaveguidesAdvanced Antenna and Metasurface Technologies

OS0116 Relationship between grain boundary energy and free volume in magnesium : first-principles study

Naoki Miyazawa、Motohiro Yuasa、Masataka Hakamada 等 5 位作者2014-01-01The Proceedings of the Materials and Mechanics Conference

First-principles calculations were performed to understand the relationship between grain boundary energy and free volume in magnesium. A linear relationship between grain boundary energy and free volume was found not only in pure Mg grain boundaries, but also in segregated grain boundaries. This indicates that the fr…

Microstructure and mechanical propertiesMagnesium Alloys: Properties and ApplicationsAluminum Alloys Composites Properties

OS0528 Statistical Distribution of Tensile Strength of PBO Fiber with Kinking Damage

Noriyo HORIKAWA、Yuuki KAWANO、Akira UENO 等 5 位作者2014-01-01The Proceedings of the Materials and Mechanics Conference

In this paper, statistical distribution of tensile strength of poly-p-phenylene benzobisoxazole (PBO) fiber with kinking damage was investigated in monofilament tests. Kinking damages was created on surface of virgin fiber by winding bundle fibers to steel rod. Diameter of steel rod was set to 5, 2.5, 1.25 and 0.65 mm…

Mechanical Behavior of CompositesTextile materials and evaluationsFiber-reinforced polymer composites

OS1106 Strength evaluation of titanium nanocolumns by controlling nanoscale shape, or stress field

Kyosuke Takeuchi、Hiroyuki HIRAKATA、Kohji MINOSHIMA2014-01-01The Proceedings of the Materials and Mechanics Conference

To clarify whether the nanoscale stress concentration dominated the fracture, we created titanium doglegged nanocolumns on a titanium thin film using dynamic oblique deposition. Two types of specimens were prepared: a forward specimen (loading to dogleg opening direction) and a reverse specimen (loading to dogleg clos…

Advanced Surface Polishing TechniquesOptical Coatings and GratingsSurface Roughness and Optical Measurements

OS2120 Measurement of Small Fatigue Crack Opening Stress Magnetostriction

Yosuke Suzuki、Yoshihito KUROSHIMA2014-01-01The Proceedings of the Materials and Mechanics Conference

The general method is not always effective for the measurement of fatigue small crack growth properties by relation of accuracy and a device characteristic. Non-contact and the highly precise measurement are expected by the use of a magnetostriction effect to apply in this study. The small crack growth properties meas…

Magnetic Properties and ApplicationsNon-Destructive Testing TechniquesEngineering Applied Research

PEMBUATAN SEMEN GIGI ZING OXIDE EUGENOL- ETHOXY BENZOIC ACID (ZOE-EBA) DENGAN PENAMBAHAN FILLER ALUMINIUM OXIDE (Al2O3)

Erfin Arif Fatmawati2014-01-01OpenAlex

Kualitas semen gigi Zinc Oxide Eugenol-Ethoxy Benzoic Acid (ZOE-EBA) dapat ditingkatkan dengan penambahan Aluminium Oxide (Al2O3). Hal ini disebabkan sifat alumina yang mudah proses fabrikasinya, ketahanan terhadap korosi, ketahanan pemakaian, bioinert dan biokompatibel. Tujuan penambahan Aluminium Oxide (Al2O3) adala…

Bone Tissue Engineering Materialsbiodegradable polymer synthesis and properties

J0430203 Mechanical properties of metal films formed by aerosol deposition method

Masakazu Mori、Yuhei Morimoto、Osamu Imamura 等 4 位作者2014-01-01The Proceedings of Mechanical Engineering Congress Japan

Aerosol deposition (AD) method is a novel deposition method. Various ceramics films can be formed on a substrate at room temperature by using AD method. Dielectric and mechanical properties of ceramics films such as PZT, BT and Al_2O_3 has been reported. However, formation of metal films by using this method has not b…

Catalytic Processes in Materials ScienceSurface Modification and SuperhydrophobicityElectrophoretic Deposition in Materials Science

OS0708 Identification of damping capacity of foamed plastics

Yasumasa Nakanishi、Tsuyoshi NISHIWAKI、Takaya Kobayashi2014-01-01The Proceedings of the Materials and Mechanics Conference

Damping properties of foamed plastics is analyzed experimentally using an impulse technique. To investigate the influence of expansion ratio on vibration damping characteristics, vibration tests are implemented. The damping capacities of foamed plastics are identified by the experimental result. These results show tha…

Asphalt Pavement Performance EvaluationPolymer Foaming and CompositesMaterial Properties and Processing

OS0201 Observation of particle behavior in Fine Particle Peening process

Yusuke Aiba、Masaki Omiya2014-01-01The Proceedings of the Materials and Mechanics Conference

A large number of tiny particles hit the specimen to improve the mechanical properties of treated materials in Fine Particle Peening (FPP) process. The induced surface modification is influenced by many parameters such as material properties, particle size, particle amount, air pressure and so on. Especially, it is we…

High-Velocity Impact and Material BehaviorErosion and Abrasive MachiningMetal Alloys Wear and Properties

J0610206 Stress Variation of Solid Oxide Fuel Cells under Operating Conditions

S. Enomoto、Kazuhisa Sato、Toshiyuki Hashida2014-01-01The Proceedings of Mechanical Engineering Congress Japan

Solid Oxide Fuel Cells (SOFC) can realize very high power generation efficiency to convert the chemical energy of H_2 directly into electrical energy. Achieving practical SOFCs will require more than just improvement in power generation performance; ensuring reliability and durability will also be crucial. So, in this…

Advanced ceramic materials synthesisAdvancements in Solid Oxide Fuel CellsFuel Cells and Related Materials

Pulp vitality tests

Vanilarasu Thirumalai、Prasanna Neelakantan2014-01-01The HKU Scholars Hub (University of Hong Kong)

Accurate diagnosis is imperative for success of root canal treatment. Currently employed vitality tests, in the true sense are termed as sensibility tests as they assess the response of the nerves of the pulp to a stimulus like heat or electric current. Assessment of pulp vitality should ideally be done based on evalu…

Endodontics and Root Canal TreatmentsCalcium Carbonate Crystallization and InhibitionDental Radiography and Imaging

J2220202 Combinatorial search for Fe-Ni-Cr magnetostrictive materials for sensors

Takuya Maetani、Yutaka Nakamitsu、Junpei Sakurai 等 5 位作者2014-01-01The Proceedings of Mechanical Engineering Congress Japan

In this research, it was searched that magnetostrictive materials for sensors by using combinatorial method. Combinatorial method is the one of the useful method that could search for optical composition of alloy materials or novel alloy materials. In this method, samples having various compositions are synthesized on…

Magnetic Properties and Applications

Zaštita podvodnog dijela brodskog trupa

Andrea Kovač2014-01-01Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Pravilno izvedena tehnologija zaštite može se znatno produljiti vijek službe broda. Najraširenija metoda zaštite u brodogradnji su premazi. Zaštitni premazi se koriste za privremenu zaštitu limova prije obrade te za trajnu zaštitu od korozije i obraštanja sagrađene brodske konstrukcije. Nekvalitetni premazi ili njihov…

Metal and Thin Film MechanicsHydrogen embrittlement and corrosion behaviors in metals

B05 Fabrication of nanopillar arrays for high-performance surface enhanced Raman scattering

Zhenxina Li、Thang Duy Dao、Tadaaki Nagao 等 5 位作者2014-01-01Seisan Kakou, Kousaku Kikai Bumon Kouenkai kouen rombunshuu/Seisan Kako, Kosaku Kikai Bumon Koenkai

A new fabrication method for realizing ordered nanopillar array is developed. In this method, firstly, a nanodot array is fabricated by combination of Nano Plastic Forming (NPF) and thermal dewetting, which does not involve costly and complicated processes such as EB-lithography. Then the Au-capped nanopillar arrays a…

Electrospun Nanofibers in Biomedical Applications