PROJECT ORIGIN 全球科学数据智能
内部预览 · MATERIALS / 01

Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 224190 / 284803 页 · 当前展示 4,483,781–4,483,800 / 5,696,060 条匹配结果 · 摘要仅作预览

Ampicillin potentials as Corrosion Inhibitor: fukui function calculations using B3-YLP exchange correlation

A.A. Siaka、NO Eddy、SO Idris 等 4 位作者2014-01-01Nigerian Journal of Chemical Research

Inhibition and adsorption potentials of ampicillin for the corrosion of mild steel in solutions of HCl have been investigated using empirical and computational approach. The experimental study was carried out using gravimetric and Fourier transform infrared spectroscopy methods of monitoring corrosion while the comput…

Corrosion Behavior and InhibitionNonlinear Optical Materials ResearchX-ray Diffraction in Crystallography

OS1602 Study on degradation of electrolyte membrane for PEFC

Akira UENO、Makoto Takane、Fumihiro Ueno2014-01-01The Proceedings of the Materials and Mechanics Conference

Electrolyte membranes are chemically degraded by H_2O_2 which are created during operation of the polymer electrolyte fuel cell (PEFC). In this study, the correlation between the mechanical properties and the chemical degradation of the electrolyte membrane for PEFC was investigated. In order to investigate the mechan…

Fuel Cells and Related MaterialsConducting polymers and applications

OS1114 Thickness dependency on creep crack growth of aluminum nano-films

Takumi Kameyama、Yuki KASHIMA、Masayuki Sakihara 等 5 位作者2014-01-01The Proceedings of the Materials and Mechanics Conference

To investigate the creep crack growth properties of aluminum (Al) nano-films deposited by electron-beam evaporation, creep crack growth experiments for freestanding 356 nm- and 139 nm-thick film specimens with a center notch or a single edge notch were conducted. In both Al films, a creep crack stably propagated at fi…

Microstructure and mechanical propertiesAluminum Alloys Composites PropertiesAnodic Oxide Films and Nanostructures

J0410205 Mechanical Properties and Press Formability of Twin-Roll Cast AZX611 Magnesium Alloy Strip

Hayato KATAGIRI、Yoshio Gonda、Zyun-ichi SAKURAI 等 4 位作者2014-01-01The Proceedings of Mechanical Engineering Congress Japan

It was well known that commercial AZ series Mg alloy show the easily ignition at low temperature comparison with Ca added Mg alloys. While magnesium alloys have long been drawing strong interest as the lightest structural materials available, their application has been limited mostly to die casting parts. The request…

Magnesium Alloys: Properties and ApplicationsAluminum Alloy Microstructure PropertiesAluminum Alloys Composites Properties

J0320603 Synthetic study and structural analysis of Metal-doped Microporous Silica composites

Takeyuki KOIDE、Masanori Kobayashi、Misato KAWANISHI 等 4 位作者2014-01-01The Proceedings of Mechanical Engineering Congress Japan

Lanthanum (La) doping porous Silica (Si) material for adsorption of carbon dioxide (CO_2) was synthesized by a precursor solution method accessed the adsorption properties, and studied the relation between the microstructure and CO_2 adsorption properties by transmission electron microscopy (TEM), X-ray diffraction (X…

Catalytic Processes in Materials ScienceMesoporous Materials and CatalysisCarbon Dioxide Capture Technologies

S0420104 Development of Dynamic Evaluation Method on Thermal Shock Fracture Properties of Ceramics

Shiliang Li、Takamasa Tsukada、Shuichi WAKAYAMA 等 6 位作者2014-01-01The Proceedings of Mechanical Engineering Congress Japan

The experimental technique for the investigation of thermal shock fracture of ceramics under various stress ratios was developed. In order to determine the testing configurations, the thermal stress field in specimen was analyzed using FEM. It was found that the ellipse specimen and cooling rod with the specific aspec…

Advanced ceramic materials synthesisHigh-Velocity Impact and Material BehaviorPowder Metallurgy Techniques and Materials

G0310503 Evaluation of Ultraviolet-Curable Resin during Curing Based on Simultaneously Measured Stress and Temperature

Hiroto Koyama、Eisaku UMEZAKI2014-01-01The Proceedings of Mechanical Engineering Congress Japan

The stress and temperature of ultraviolet (UV) curable resin during curing were measured using a simultaneous measurement system of stress and temperature and their relationship was investigated. The specimen consisted of a mold and UV-curable rein in liquid form. The mold consisted of glass plates, acryl plates and a…

Silicone and Siloxane ChemistryPhotopolymerization techniques and applicationsEngineering Applied Research

Определение предельной высоты падения капли, при которой не происходит нарушения сплошности объема жидкости на поверхности

P.S. Vasil'ev、С Л Рева、Л С Рева 等 5 位作者2014-01-01IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY

The description of the methodology for determining of limit height drop fall, at which there isn’t volume discontinuity of liquid heating surface, and a comparison of the experimental and calculated limit height fall values are observed.

Material Properties and ApplicationsAdvanced Theoretical and Applied Studies in Material Sciences and Geometry

Environmentally friendly inhibitors of carbon steel corrosion in chloride environments

Franjo Ivušić、Olga Šarc-Lahodny、Helena Otmačić Ćurković 等 5 位作者2014-01-01Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

In this research the effect of cerium (III) chloride heptahydrate (CC) and sodium gluconate (SG) on the corrosion inhibition of carbon steels C45 (1531) and DIN RSt 37-2 (0361) in chloride environments has been evaluated using Tafel polarization technique, EIS method and weight loss measurements. Experiments were perf…

Corrosion Behavior and InhibitionHigh voltage insulation and dielectric phenomenaConcrete Corrosion and Durability

Устойчивость аустенита при разных температурах и механические свойства горячекатаной стали 40Х

А. А. Филиппов、Г. В. Пачурин、Н. А. Кузьмин2014-01-01Международный журнал прикладных и фундаментальных исследований

In the automotive and many other industries widely used high-strength bolted connections, which are one of the most popular types of machinery parts. The paper studies the strength and plastic properties of the original hot-rolled steel for cold forming metal wares and studied the stability of austenite steel 40X in a…

Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties

Изучение острой и подострой токсичности экстракта цистанхе

М. К. Амиркулова、Э.М. Сатбаева、Аида Мурзекеновна Сейталиева 等 7 位作者2014-01-01Vestnik

This publication presents the results of study of acute and subacute toxicity of the tsistanhe extract at enteral way of introduction. No any toxic effects were revealed at enteral introduction in the experiment, which allow us to recommend it for further in-depth research of pharmacological activity

Cancer Treatment and PharmacologyPhytochemistry and Bioactive Compounds

C41 Influence of cryogenic machining by using liquid nitrogen on end milling of CFRTP

Tasuku Higaino、Tojiro AOYAMA、Hitoshi Ogawa2014-01-01Seisan Kakou, Kousaku Kikai Bumon Kouenkai kouen rombunshuu/Seisan Kako, Kosaku Kikai Bumon Koenkai

CFRP(Carbon Fiber Reinforced Plastic) is widely used for airplane, automobile and general machinery because of its high specific strength and modulus of elasticity. CFRTP(Carbon Fiber Reinforced Thermo-Plastic) is especially attracting the attention of the viewpoint of recycling and molding speed. In machining of CFRT…

Advanced machining processes and optimizationAdvanced Surface Polishing TechniquesMetal Alloys Wear and Properties

OS1603 Mechanical properties evaluations under simulated operating condition for SOFC materials

S. Watanabe、Shinichi Hashimoto、Keiji Yashiro 等 4 位作者2014-01-01The Proceedings of the Materials and Mechanics Conference

We have attempted to construct multiscale model which can simulate inelastic deformation and stress state under operating conditions. It would need to the information about mechanical properties of solid oxide fuel cell constituent materials under operating condition for analysis model building up process and simulati…

Advancements in Solid Oxide Fuel CellsFuel Cells and Related MaterialsConducting polymers and applications

C36 Study on characteristics of machined surface by end milling processes for SUS304 stainless steel

Kôji Kawamura、Shigehiko SAKAMOTO、Mitsuru Murai2014-01-01Seisan Kakou, Kousaku Kikai Bumon Kouenkai kouen rombunshuu/Seisan Kako, Kosaku Kikai Bumon Koenkai

Machined parts of stainless steels as difficult-to-cut materials are widely used in many industries, which are transportation equipment, electrical machinery, automobile and aerospace industry. This study describes that the characteristics of machined surface by end milling and burnishing process for SUS304 austenitic…

Metal Alloys Wear and PropertiesLaser and Thermal Forming Techniques

20117 Internal Damage Observations and Dynamic Characterization of CFRP Composite Laminates

Kohji SUZUKI、Masahiko UEKUSA、Yoshihiro Takahashi2014-01-01The Proceedings of Conference of Kanto Branch

In this study, carbon fiber reinforced plastic (CFRP) composite laminates with three different stacking sequences, that is, unidirectional (UD), cross-ply (CRS) and quasi-isotropic (QIS), were fabricated together with those damping CFRP laminates with a sheet of flexible material (PIEZON) for damping enhancement inser…

Mechanical Behavior of CompositesMaterial Properties and Applications

OS0118 Alloy Composition Dependency of Equi-Plastic Work Surfaces in Biaxial Compressions of Ti-Nb Alloys

Ichiro SHIMIZU、Kazuki Hisada、Shin‐ichi Ishikawa 等 4 位作者2014-01-01The Proceedings of the Materials and Mechanics Conference

Metastable beta type titanium alloys have been attracting attention in various industrial fields because of their special properties such as high specific strength, good formability, high corrosion resistance, and biocompatibility. However, plastic deformation characteristics of the titanium alloys have scarcely been…

Metal Forming Simulation TechniquesMetallurgy and Material FormingTitanium Alloys Microstructure and Properties