Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
This study describes the possibility of dielectric characterization of the initial stages of ageing in an low-density polyethylene (LDPE) + graphite composite, which is not possible using the standard method of dielectric spectroscopy. It is shown that the differences between the delay angles, #$ = $ TRI -%$ SIN , obt…
Interactive effects of carbon allotropes on the mechanical reinforcement of polymer nanocomposites were investigated. Carbon nanotubes (CNT) and nano-graphite with high shape anisotropy (nanoG) were melt blended with poly(1,4cis-isoprene), as the only fillers or in combination with carbon black (CB), measuring the she…
Through the laboratory test, the mechanical properties of cementsoil with adding desulfurization gypsum, fly ash, and polypropylene fiber were studied. Three different percentages (0%, 0.5%, and 1.0%) of polypropylene fiber were mixed into new cementsoil for which the cement content is 15% of the dry soil weight, the…
The tribological performance of Si3N4 ball sliding against Ti3SiC2 disc lubricated by lithium-based ionic liquids (ILs) was investigated using an Optimol SRV-IV oscillating reciprocating friction and wear tester at room temperature (RT) and elevated temperature (100°C). Glycerol and the conventional imidazolium-based…
Nanocomposite materials based on two different types of polyester matrix (a commercial type and a laboratory produced one) with embedded barium titanate nano-particles were developed and characterized. Structural and morphological characteristics of the produced composite specimens were studied via X-ray diffraction,…
Transport and storage properties of sol-gel synthesized, namely, dip coating technique, titanium dioxide (TiO2) thin film over crystalline silicon (c-Si), has been investigated by means of current-voltage (I-V) and admittance analysis within different ambient. Considering the work function of anatase TiO2film, determi…
TiN/Ta multilayer film with a modulation period of 5.6 nm and modulation ratio of 1 : 1 was produced by ion beam assisted deposition. Microstructure of the as-deposited TiN/Ta multilayer film was observed by transmission electron microscopy and mechanical properties were investigated. Residual stress in the TiN/Ta mul…
Pd77.5Cu6Si16.5 metallic glass was prepared by fluxing treatment and water quenching method. To avoid possible artifacts, shear bands were created by indentation after TEM sample preparation. Bright field image, diffraction pattern, and the dark field image of TEM that covered the shear band region were presented. A f…
In fluid-assisted injection molding, the distribution of the residual wall thickness on the inside and outside of the curved area is different, and void is formed due to the effect of the shrinkage on the outside where the residual wall thickness is thicker. The shrinkage that takes place in the residual wall is affec…
Al-Mg-Si (AA6061) Al alloy plates were joined by the method of gas metal arc welding using Al-5Mg (ER5356) filler metal and were subjected to the oxidation test in flowing air environment at 600∘C from 8 to 40 hours and the weight gain was measured. The characteristic of oxide grown on welded zone surface was examined…
This paper deals with soldering high-purity brittle, nonmetallic materials such as SiO2, Si, and C (graphite). However, these materials exert poor wettability when using tin solder. Therefore, to reduce the wetting angle, an Sn solder alloyed with active Ti element was used. At a soldering temperature of 860°C and 15…
Microextrusion is becoming increasingly important for the manufacturing of microcomponents. However, this reduction in scale to a microlevel means that the influence of friction and the need for suitable lubrication are greatly increased. This study therefore looks at the use of a low-friction and highly wear resistan…
Physical, optical, and luminescence properties of Nd3+ions in bismuth barium borate glass system were studied. The glasses prepared by a melt quenching method were doped at various Nd2O3concentrations in compositions (40-x)B2O3 : 40Bi2O3 : 20BaO : xNd2O3(wherex= 0.00, 0.50, 1.00, 1.50, 2.00, and 2.50 in mol%). Lumines…
The feasibility study on carbon fibre reinforced polymer (CFRP) fabrics in axial strengthening of hollow square sections (HSS) was investigated in this paper. CFRP was used as strips form with other parameters such as the number of layers and spacing of strips. Experimental results revealed that the external bonding o…
In this study, we present a promising approach for the rapid development of porous polydimethylsiloxane (PDMS) scaffold prototypes, with outer geometry defined from the design stage, according to the form of conventional implants or adapted to patients’ biostructures. The manufacture method is based on phase separatio…
Artificial media were used to enrich microbe and improve the water resource quality; therefore trace quantity organic pollutants of 1,2,4-trichlorobenzene were biodegraded. The result of the test showed that, after domestication, the microassociation enriched in the assembled medium could remove corresponding trace qu…
A new type of postinstalled wedge anchor (B15G) is presented. A refined geometry of the anchor bolt and a careful choice of all the technical details allow the insert to work also in tensile stress states and to avoid much of the practical uncertainties that affect the commonly used procedures. The calibration of the…
Highly crystalline pure perovskite-type LaNbON2powders were synthesized in supercritical ammonia using sodium hydroxide as an oxygen source. Additionally, doping LaNbON2with cations of lower valence than that of the parent cation was performed to inhibit reduction of Nb5+. Various characterization methods indicated th…
The prevalent nature of osteoarthritis that causes the erosion of joint surfaces and loss of mobility and muscle dystrophy that weakens the musculoskeletal system and hampers locomotion underlies the importance of developing functional replacement or regeneration of muscle and cartilage tissues. Polyelectrolyte gels h…
Low tissue penetration and harmful effects of (ultraviolet) UV or visible light on normal tissue limit exploiting nanocarriers for the application of light-controlled drug release. Two strategies may solve the problem: one is to improve the sensitivity of the nanocarriers to light to decrease the radiation time; the o…