Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
A way to produce new metal-carbon nanoobjects by transformation of a graphene flake with an attached transition metal cluster under electron irradiation is proposed. The transformation process is investigated by molecular dynamics simulations by the example of a graphene flake with a nickel cluster. The parameters of…
Epoxy nanocomposites with commercial carbon nanotubes (CNT) or graphene (GN) have been prepared using phosphonium ionic liquid [trihexyltetradecylphosphonium bis (2,4,4-trimethylpentyl) phosphinate, IL-f]. IL-f served simultaneously as nanofiller dispersing medium and epoxy resin catalytic curing agent. An influence o…
A new method is proposed to estimate pumping pressure based on concrete composition without experimental measurements. Previous studies show that the pumping pressure depends on the interface friction between concrete and the wall of the pumping pipes. This friction is determined by the thickness and the rheology of t…
The conduction mechanisms in dielectric films are crucial to the successful applications of dielectric materials. There are two types of conduction mechanisms in dielectric films, that is, electrode-limited conduction mechanism and bulk-limited conduction mechanism. The electrode-limited conduction mechanism depends o…
Fiber-like polyaniline (PANI)/carbon nanohorn (CNH) composites (PACN composites) were prepared as electrode materials for supercapacitor by simple method that involves in-situ polymerization of aniline in the presence of CNH in acidic (HCl) medium with noteworthy electrochemical performances. Thus, the prepared PACN c…
In this study, electroactive polyimide (EPI)/graphene nanocomposite (EPGN) coatings were prepared by thermal imidization and then characterized by Fourier transformation infrared (FTIR) and transmission electron microscope (TEM). The redox behavior of the as-prepared EPGN materials was identified by in situ monitoring…
A micro-Raman study is carried out to investigate the influence of the filler on the curing process of bisphenol A diglycidyl ether (DGEBA)-based epoxy matrix composites. The composites are cured (14 h at 393 K) with an anhydride (methyl tetrahydro phthalic anhydride, MTHPA, 100:90 pbw), catalyzed with a tertiary amin…
editorial
Water is often added to concrete placing for easy workability and finishability in construction site. The additional mixing water can help easy mixing and workability but causes increased porosity, which yields degradation of durability and structural performances. In this paper, cement mortar samples with 0.45 of W/C…
The composite thin films of poly(3-aminobenzoic acid) (PABA) and multiwalled carbon nanotubes (MWNTs) are successfully fabricated through an electrochemical method. The composite mixtures containing 50 mM of 3-aminobenzoic acid with various concentrations of MWNTs (1.0, 2.5, 5.0, 7.5, and 10 mg/mL) in 0.5 M H2SO4were…
Computational model using continuous source functions along the fibre axis is presented for simulation of temperature/heat flux in composites reinforced by short fibres with large aspect ratio. The aspect ratio of short fibres reinforcing composite material is often as large as 103 : 1–106 : 1, or even larger. 1D cont…
Severe plastic deformation (SPD) has been widely employed to refine the grain size of Mg alloys, with the main objective to improve the strength and ductility of Mg alloys, since the well-known Hall-Petch equation suggests that a decreased grain size leads to an increased yield strength. However, the yield strength of…
editorial
PTFE samples were prepared with different thicknesses. Their electric field intensity and distribution of the PTFE samples placed inside a rectangular waveguide were simulated using finite element method. The calculation of transmission/reflection coefficients for all samples thickness was achieved via FEM. Amongst ot…
We present comparative studies on the effect of varying the carboxylic-group content of thermally reduced graphene oxides (TRGs) on the anticorrosive properties of as-prepared poly(methyl methacrylate) (PMMA)/TRG composite (PTC) coatings. TRGs were formed from graphene oxide (GO) by thermal exfoliation. The as-prepare…
Vacuum freeze-drying technology is applicable to the process of high heat-sensitive products. Due to the long drying period and extremely low processing temperature and pressure, the uniform and efficiency of heat transfer fluid temperature in shelf are critical for product quality. Therefore, in this study, the comme…
A novel sintered stainless steel fiber felt (SSSFF) with rough surface morphologies and high strength as well as high porosity is fabricated by solid-state sintering of stainless steel fibers produced by cutting method. The rough surface morphologies are characterized by laminar and jagged structures formed on the sur…
Poly(ethylene terephthalate) (PET) waste from local market was depolymerized by ethylene glycol (EG) in the presence of metal-containing ionic liquids, and the qualitative analysis showed that the bis(hydroxyethyl) terephthalate (BHET) was the main product in this process. Compared with other metal-containing ionic li…
ZnO nanoparticles were synthesized in a horizontal furnace at 500°C using different zinc nitrate hexahydrate concentrations (0.01 and 0.1 M) as reactive solution by ultrasonic spray pyrolysis method. The physical-chemical properties of synthesized ZnO nanoparticles have been characterized by thermogravimetric analysis…
Modification of poly(benzimidazole) (PBI) by N-alkylation leads to polymers capable of undergoing microphase separation. Polymers with different amounts of C18 alkyl chains have been prepared. The polymers were analyzed by spectroscopy, thermal analysis, electron microscopy and X-ray scattering. The impact of the amou…