Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Lanthanum/gadolinium zirconate coatings are deposited via suspension plasma spray with suspensions fabricated by a planetary mill and compared with hot-pressed samples via solid-state reaction. With increase in processing time of the planetary mill, the mean size and BET surface area change rapidly in the case of lant…
The transport properties of a paired Majorana bound states (MBSs) in a parallel junction are theoretically investigated, by considering the influence of different MBS-lead coupling manners, i.e., left-right asymmetric coupling, upper-down asymmetric coupling, and left-right upper-down asymmetric coupling. The calculat…
In this study, analysis on the oxidation behavior was conducted by a series of high-temperature oxidation tests at both $800^{\circ}C$ , $900^{\circ}C$ and 1000 in the air with sintered STS 316L. The weight gain of each oxidized specimen was measured, the oxidized surface morphologies and composition of oxidation laye…
Fuel cells are an attractive option for alternative power and of use in a variety of applications. This paper proposes a state space model for the solid oxide fuel cell (SOFC) based power system that comprises fuel cell, DC-DC buck converter, and load. In this investigation we have taken up a case study for SOFC feedi…
A novel combination of a phase inversion process followed by electrophoretic deposition was used to fabricate anode supported micro-tubular hollow fiber solid oxide fuel cells (SOFCs).The phase inversion process was used to produce 240 μm thick 60 wt% NiO -40 wt% yttria-stabilized zirconia (YSZ) hollow fiber anode pre…
The nucleation and passivation of oxide deposition was studied on defect-free GaAs (110) surfaces to understand passivation of surfaces containing only III-V heterobonds. The passivation process on GaAs (110) was studied at the atomic level using scanning tunneling microscopy while the electronic structure was determi…
서태평양 해저산 사면에 부존하는 고코발트 망간각은 코발트, 니켈, 백금, 희유금속 등을 다량 함유하고 있으며, 최근 국제해저기구에서 공해상 탐사규칙이 제정됨에 따라 개발 대상으로 더욱 주목받고 있다. 해저산에 분포하는 망간각의 개발을 위해서는 경사가 낮고 지형기복이 완만하여 채광에 유리한 지형조건을 갖추면서 망간각이 두껍게 분포하는 유망지역을 선별하여야 한다. 따라서 광역단계의 망간각 탐사는 음향 수심탐사를 통한 지형 및 경사도의 확인, 음향산란 자료의 획득을 통한 기저면 표층 매질 분포 파악, 그리고 해저면 영상 관찰과 시료채취를 통한 망간각의 분포 두께 파악이…
We have studied the behavior of LaFeO3 under pressure (P) using density functional theory (DFT) and atomistic simulations. Ground state structural properties of LaFeO3 are correctly described by atomistic simulations. The effect of high pressure shows that there is an isotropic compression up to 100 GPa. However, DFT…
Ultraviolet photocarrier radiometry (UV-PCR) was used for the characterization of thin-film (nanolayer) intrinsic hydrogenated amorphous silicon (i-a-Si:H) on c-Si. The small absorption depth (approximately 10 nm at 355 nm laser excitation) leads to strong influence of the nanolayer parameters on the propagation and r…
Metal surfaces operated under high electric fields produce sparks even if they are held in ultra high vacuum. In spite of extensive research on the topic of vacuum arcs, the mystery of vacuum arc origin still remains unresolved. The indications that the sparking rates depend on the material motivate the research on su…
The reinforcing effect of two structurally different Aramid short fibers, Technora and Twaron on the mechanical, dynamic mechanical, and thermal properties of an ester‐based thermoplastic polyurethane (TPU) was investigated. A fixed fiber length of 6 mm is used by varying the fiber loading ranging from 3 to 10 phr. Th…
In this study, the synthesis of nickel nanoparticles and copper nanospheres for the potential applications of MLCC electrode materials has been studied by plasma arc evaporation method. The change in the broad distribution of the size of nickel and copper nanopowders is successfully controlled by manifesting proper mi…
We study the nucleation of model two-dimensional crystals formed from anisotropically interacting molecules using kinetic Monte Carlo simulations and the forward flux sampling algorithm. The growth probability P(n) of a cluster of n molecules is measured while the supersaturation s and interaction anisotropy of the mo…
Structural and elastic properties of chalcopyrite-type CuInSe 2 are determined in almost full stability range of temperature from 11 to 1,073 K, by in situ X-ray diffraction, employing a synchrotron-radiation source. The studied polycrystalline sample was prepared from a stoichiometric single crystal. Phase analysis r…
Recently, an implementation of the specific reaction parameter (SRP) approach to density functional theory (DFT) was used to study several reactive scattering experiments of H2 on Cu(111). It was possible to obtain chemical accuracy (1 kcal/mol ≈ 4.2 kJ/mol), and therefore, accurately model this paradigmatic example o…
With semiconductor-device geometry shrinking and becoming more complex, highly diluted chemicals are used during aqueous silicon wafer cleaning. The use of physical cleaning aids such as megasonic agitation with dilute chemistry or high-pressure atomizing jet sprays to avoid reduction of particle removal efficiency is…
The cathode reaction is one of the most seriously limiting factors in a microbial fuel cell (MFC). The critical dissolved oxygen (DO) concentration of a platinum-loaded graphite electrode was reported as 2.2 mg/l, about 10-fold higher than an aerobic bacterium. A series of MFCs were run with the cathode compartment in…
The effect of confinement is studied on the local structure of two- and three-dimensional hard-core fluids. The hard disks are confined between two parallel lines, while the hard spheres are in a cylindrical hard pore. In both cases only nearest neighbour interactions are allowed between the particles. The vertical an…
An MoO3 buffer layer prepared by thermal evaporation as hole injection layer was investigated in organic light emitting diodes. The MoO3 film inserted between the anode and hole transport layer decreased the operating voltage and enhanced power efficiency. Introduction of 1 nm MoO3 film, which was found to be the opti…
Amorphous steels have demonstrated superior properties and great potentials for structural applications since their emergence, yet it still remains unclear about how and why their mechanical properties are correlated with other factors and how to achieve intended properties by designing their compositions. Here, the i…