Yoshiaki Yasui1992-01-01Advanced Composites Letters
The buckling strength and behavior of the simply-supported rectangular FRP plate with a centrally located hole under uniaxial and biaxial compressive loading is elucidated as the numerical results of FEM. The composite materials consisting of carbon-fiber/epoxy are treated as the case of angle-ply and cross-ply orthot…
Composite Structure Analysis and OptimizationStructural Behavior of Reinforced ConcreteMaterial Properties and Applications
J. M. Lang、Zbigniew A. Dreger、H. G. Drickamer1992-01-01The Journal of Physical Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTHigh-pressure studies of photoluminescence and thermoluminescence of copper and chloride doped zinc sulfide phosphors using laser selection excitationJ. M. Lang, Z. A. Dreger, and H. G. DrickamerCite this: J. Phys. Chem. 1992, 96, 1, 85–89Publication Date (Print):January 1,…
Advanced Chemical Physics StudiesLuminescence Properties of Advanced MaterialsPerovskite Materials and Applications
Kimitaka Hayashi、Yasuhiko MIYOSHI1992-01-01鐵と鋼 : 日本鐡鋼協會々誌
塗膜下めっき腐食先端におけるZnの腐食反応を検討し以下の知見を得ることができた.(1)乾湿繰返し及び濡れ環境下における塗膜下腐食先端では以下のめっき腐食反応が起こる.(めっき腐食反応)めっき上におけるアノード反応: Zn→Zn2++2e-めっき及び近傍の地鉄上におけるカソード反応:1/2O2+H2O+2e-→2OH-(塩基性塩化亜鉛の生成反応)5Zn2++2Cl-+8OH-→ZnCl2・4Zn(OH)2(めっき腐食反応のOverall)5Zn+5H2O+5/2O2+2Cl-→ZnCl2・4Zn(OH)2+2OH-(2) in-situ pH測定によりZnCl2・4Zn(OH)2形成層内は弱アルカリ性(pH=8~9)になっていること…
Corrosion Behavior and InhibitionSemiconductor materials and devicesAnodic Oxide Films and Nanostructures
J. X. Li、Yohtaro Matsuo、Shiushichi KIMURA1992-01-01Journal of the Ceramic Society of Japan
The effect of fiber coating on the residual thermal stresses, interface, and mechanical properties of CVD-(C, SiC) coated Nicalon fiber-reinforced alumina matrix composite were studied. Using a tri-cylindrical model, the residual thermal stresses caused by the mismatch of their thermal expansion coefficients and the m…
Advanced ceramic materials synthesisAluminum Alloys Composites PropertiesAdvanced materials and composites
Seiji Yamanaka、Gunjiro Maruyama、Tamotsu Ueyama1992-01-01Journal of the Ceramic Society of Japan
The thermal decomposition of polyvinylbutyral (PVB) and polyvinylbutyral/PLZT, PMN dielectric powder composite was studied using pyrolysis gas chromatograph method. On thermal decomposition of only PVB, at 255°C n-butanal was begun to eliminate and then many gas products which were n-butanal, acetaldehyde, 2-butenal,…
Polymer crystallization and propertiesSynthesis and properties of polymersPolymer Science and PVC
K. Hinode、Takeshi Furusawa、Y. Homma1992-01-01OpenAlex
Relaxation in electromigration is one of the most important factors which determine the lifetime of a conductor carrying a pulsed current. The purpose was to clarify the mechanism of this relaxation. During low-frequency (DC to mHz) pulse-migration tests, an extremely slow relaxation was detected in Al conductor resis…
Electronic Packaging and Soldering TechnologiesCopper Interconnects and ReliabilitySemiconductor materials and interfaces
David L pez P rez、Peter Rez1992-01-01Microscopy Microanalysis Microstructures
Previous calculations of inner shell cross sections used in quantitative microanalysis have neglected transitions to discrete states that appear in spectra as white lines. White line are especially prominent in L23 edges from 1st and 2nd row transition elements and M45 edges in rare earth elements. These discrete feat…
X-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy TechniquesIon-surface interactions and analysis
Mārtiņš Kalniņš、M.T. Conde Braña、Ulf W. Gedde1992-01-01Polymer Testing
Samples of low- and high-density polyethylene (PE) and polypropylene (PP) have been treated with chlorosulphonic acid at room temperature for various periods of time. Optical microscopy showed that the chlorosulphonic acid penetration rate was constant with time in bulk low-density PE. The treated polymers became blac…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesMicroplastics and Plastic Pollution
Ronald S. Graves、D.W. Yarbrough1992-01-01Journal of Thermal Insulation
Fiberglass batt insulations intended for use in buildings are labeled with an R-value and a thickness at which the R-value is achieved. In some cases the insulation is installed in such a way that the label thickness is not achieved. The material R-value of fiberglass batts installed at less than full thickness will b…
Textile materials and evaluations
K. Kano、Y. Kawabuchi、Kingo Uchida 等 5 位作者1992-01-01IEEE Transactions on Power Delivery
Line charge, which is trapped after opening the line circuit breaker of a long overhead transmission line or power cable, is discharged through magnetic voltage transformers (VTs) or shunt reactors, if either is connected to the power line or cable. Although this duty is very important for a VT, there is no descriptio…
High voltage insulation and dielectric phenomenaLightning and Electromagnetic PhenomenaPower Transformer Diagnostics and Insulation
J Lara、NF Nelisse、Steven Côté 等 4 位作者1992-01-01OpenAlex
Various parameters relevant to the puncture resistance of protective clothing materials were studied. The experimental set-up was installed in an Instron testing machine. Testing was performed in a compression mode. A point was installed in a 890-newton (200-lb) load compression force cell in the movable arm of the ma…
Textile materials and evaluations
L. A. Dissado、J.C. Fothergill1992-01-01Institution of Engineering and Technology eBooks
Water trees in crosslinked and uncrosslinked polyethylene are easily visible under the microscope, and often appear to show some structure. Thus regions of greater water density have sometimes been termed channels. However this terminology cannot be taken to indicate the presence of hollow tubes since no cracks or cra…
High voltage insulation and dielectric phenomenaWater Systems and OptimizationGeotechnical Engineering and Underground Structures
Koichi Watanabe、Masao Kitamura1992-01-01Mineralogical Journal
Growth mechanism of plagioclase crystals from a basaltic melt of tholeiite type prepared by chemical reagents was studied by using the isothermal-dropping technique with iron and platinum capsules. Produced phases are plagioclase, olivine, pigeonite and augite. Crystal morphology of plagioclase varies from prismatic t…
Enzyme Structure and FunctionCalcium Carbonate Crystallization and InhibitionCrystallization and Solubility Studies
S. Suriñach、M.D. Baró、S. Bordás 等 5 位作者1992-01-01LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
Se pone de manifiesto la idoneidad de la técnica de calorimetría diferencial de barrido para la caracterización de materiales. Se presentan ejemplos específicos de aplicación de dicha técnica en el estudio de los fenómenos ligados a la transición vitrea y cinética de cristalización de vidrios calcogenuros y metálicos…
Phase-change materials and chalcogenidesThermal and Kinetic AnalysisChemical Thermodynamics and Molecular Structure
Yoshihiko Yano、Yukihiko Shirakawa、Hisao Morooka1992-01-01Journal of the Ceramic Society of Japan
Multilayered composites having the structure of Ni/ZnO/PrCoOxide/Au were fabricated by the sputtering technique and their electrical properties were examined. It was found that a multilayered composite is an excellent low voltage varistor (α=30, breakdown voltage=6.5V). The results of the voltage-current (V-I) and the…
ZnO doping and propertiesMagnetic Properties and ApplicationsSmart Materials for Construction
Yasuo Kousaka、Yoshiyuki Endo、Yasunobu Nishie1992-01-01KAGAKU KOGAKU RONBUNSHU
液架橋形成機構を明らかにするために, 接触角が0°の場合の等径2球間に形成される溶解性不純物を含まない理想的な液架橋の形状についてKelvinの式を適用して理論解析を行った.その結果, 液架橋形状を雰囲気の湿度, 液体の物性, 粒子径などの関数として求めることができた.また, Kelvin効果によって形成される液架橋の大きさは最狭部の直径で100nm以下と非常に小さいことがわかった.実験では, 2枚のガラス製凸レンズおよび2球のガラスビーズ間に液架橋を形成させ, 恒温恒湿器内の一定の温度・湿度下で, 架橋形状を顕微鏡によって観察した結果, 理論解析を裏付ける結果が観察されると同時に, 架橋液中にわずかでも溶解性不純物が含まれる場合…
Pickering emulsions and particle stabilization
Hitoshi Taniguchi、Akira Shinpo、Tsuneki Okazaki 等 5 位作者1992-01-01NIPPON KAGAKU KAISHI
Degradation mechanism of 1, 2-bis(2, 4, 5-trimethyl-3 -thienyl)-1, 2-dicyanoethene (TECN)was studied by product analysis. When TECN was irradiated in dichloromethane with 420nm light, the closed-ring isomer with absorption maximum at 520 nm was the sole product. O n the other hand, when irradiated with 370 nm light, o…
Photochromic and Fluorescence Chemistry
N. H. Turner1992-01-01Surface and Interface Analysis
Abstract In an earlier investigation a polynomial method to estimate area and peak positions in wide‐scan XPS spectra was demonstrated with digital data (see N. H. Turner and A. M. Single, Surf. Interface Anal. 15, 215 (1990)). This method uses a density of points of about one per electron‐volt. It was found that in m…
Advancements in Photolithography TechniquesX-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy Techniques
Hiroshi Mitomo1992-01-01Sen i Gakkaishi
Poly (β-hydroxybutyrate) and its copolymer poly (β-hydroxybutyrate-co-β-hydroxyvalerate) P (HB-co-HV) were treated with methyl- and ethylamines. Melting peak temperatures, number-average molecular weights (Mn) and long spacings (L) of treated samples decreased as the concentration of amines or the treating time increa…
biodegradable polymer synthesis and properties
Ikuji Takagi1992-01-01Journal of Nuclear Science and Technology
Diffusion, permeation and trapping of deuterium in nickel exposed to a deuterium plasma were studied experimentally at temperatures of 455 to 568 K.One side of a nickel membrane was exposed to the plasma and the plasma-driven permeation was monitored.A beam of 3 He irradiated the same side simultaneously to observe de…
Fusion materials and technologiesNuclear reactor physics and engineeringNuclear Materials and Properties