Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Dicyclohexylmethylmethane-4,4'-diisocyanate is used to react with polyoxytetramethylene diol at different temperatures. N,N-Dimethyl acetamide is used as solvent.In situFT-IR is used to monitor the reaction to work out rate constant, Arrhenius equation and Eyring equation. The polymerization has been found to be a sec…
The Slotted Waveguide Antenna Stiffened Structure (SWASS) utilizes conventional hat-stiffeners or blade stiffeners in aircraft sandwich structures as microwave waveguides. Slotted waveguide antenna arrays may therefore be integrated into the structure by machining slots through the outer skin. However, the primary mec…
A classical superluminal propagation in systems with anomalous dispersion is compared with recently introduced superluminal propagation in non-Foster active epsilon-near-zero (or mu-near-zero) metamaterials. It is shown that the underlying physics of non-Foster superluminal propagation is fundamentally different from…
Ensembles of InAs quantum dots with a very low density (∼10 6 cm −2 ) are grown by molecular beam epitaxy, which allows the spectral characteristics of emission of single quantum dots to be studied by the method of cryogenic microphotoluminescence. With increasing quantum dot size, the splitting of exciton states is d…
t is one of precondition of determining rock material dynamic parameters for one-dimension assumption of the elastic pressure bar. In order to analyze its effect by loading wave type, the dynamic stress was simulated with Ls-dynamic finite element software, when SHPB(Split Hopkinson Pressure Bar) pressure bar with dia…
The paper is proposed that we can use single factor experiment method and range analysis method to investigate four technological parameters (Melt temperature, Weight loss, Injection time and Gas content) of the technological parameters in the process of microcellular foam injection molding. By investigating the rules…
We explain the experimental improvement in long wavelength response by hydrogen plasma treatment (HPT) in n/i interface. The absorption coefficient of the intrinsic microcrystalline silicon (μc-Si) is decreased in the low energy region (0.8~1.0 eV) by HPT, which indicates a lower defect density in μc-Si layer deposite…
The corrosion inhibition of N,N-diethylammonium O,O-di (3-methylphenyl) dithio-phosphate (NDOMD) for Q235 steel in HCl solution was studied by electrochemical measurements and weight loss measurements. And the effects of temperature, HCl concentration and immersion time were also studied. Polarization curves indicate…
Particulate reinforced titanium matrix composites (PTMCs) are attracting increasingly attention in various engineering applications. In this paper, comparative grinding experiments of PTMCs were carried out using WA abrasive wheel and CBN abrasive wheel. The morphology of the ground surface was observed by scanning el…
Polypropylene/organoclay modified by dodecanol phase change material were prepared by melt blending method. The thermal stability and crystallization behavior was studied by thermogravimetry (TG), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). TG results indicated the window of processing of PP…
The cyclic voltammograms (CVs) of polyacrylonitrile (PAN)-based carbon fibers (CFs) were measured in different electrolyte aqueous solutions, temperatures and concentrations. By analyzing the CVs, the mechanism of the anodic oxidation of PANbased CFs was investigated. The results show that the anodic oxidation of CFs…
Samples of structured carbon particles have been obtained with a high concentration of functional oxygen-containing groups on their surfaces. The introduction of an SCP with plasmochemically modified surfaces raises adhesive strength of polyamide-6 based coatings used for tribological purposes. The mechanism of intera…
This contribution investigates an original solution that can be used in the design of AFPM machines, whenever a constrained shaft height requirement penalizes a standard design. The machine is tailored for electrical traction, but the ideas that are set forth are valid for any application with constrained shaft height…
The quality of thermal contacts between a graphene flake and metal electrodes was shown to improve strongly by laser annealing. The improvement of thermal contacts to initially rough metal electrodes is attributed to local melting of the metal surface under laser heating, and increased area of real metal-graphene cont…
Electrochemical properties of defect-introduces graphenes for lithium ion batteries were investigated. Graphene sheets (GSs) were prepared from graphite through treating with oxidizing agent followed by rapid thermal exfoliation. Defect concentration was controlled by selecting the number of times of oxidation of grap…
We investigated the effect of hydrochloric acid concentration for preparing the superhydrophobic surface on aluminum alloy by etching and PP coating. The superhydrophobicity of the surface was characterized by water contact angle. The morphologies of the surface were observed by SEM. The results showed that the acid c…
Chemical sensing is one of the most promising applications of graphene based nanostructures. Here, we present a study of the effects of lithium adsorption on the electronic properties of graphene derivatives and its ability to serve as a chemical linker for different organic molecules. Lithium adsorption is found to s…
In this paper, design based on tapered circular grating structure was studied, to provide broadband enhancement in thin film amorphous silicon solar cells. In comparison to planar structure an absorption enhancement of ~ 7% was realized.
We present DNA-directed self assembly of two-dimensional (2D) trimer and three-dimensional (3D) symmetric tetramer. Polarized scattering spectra are investigated to elucidate the coupled plasmon modes in each cluster, which are compared with Finite Element Method (FEM) modeling. We conclude that drastically enhanced l…
In the previous study on PPS race-PTFE retainer Hybrid polymer bearings, the relationship between thrust load, rotation speeds and wear loss under dry condition was investigated. It was found that the wear loss obviously changed under the thrust load ranging from 400N to 500N at the rotation speeds of 450rpm and 600rp…