Nur Izzati Zulkifli、Noorasikin Samat2013-09-01Advanced materials research
Recycled polypropylene/microcrystalline cellulose (rPP/MCC) composites were prepared by adding different loadings of maleic anhydride grafted polypropylene (MAPP) coupling agent. The tensile, impact and morphological properties of the composites were investigated. The obtained results show that the tensile and impact…
Polymer crystallization and propertiesNatural Fiber Reinforced Compositesbiodegradable polymer synthesis and properties
N. Balakrishnan、K. Mayilsamy2013-09-01Journal of Renewable and Sustainable Energy
Oxidative thermal degradation and flame retardant behavior of cotton with intumescent formulations containing nanoclay as well as biodiesel (B0, B23, and B100) are studied by thermogravimetry (TG), differential thermal analysis, and limiting oxygen index (LOI). Activation energy of thermal degradation of cotton and co…
Polymer composites and self-healingFire dynamics and safety researchFlame retardant materials and properties
Zheng Jin、Yuan Tian、Lin Su 等 7 位作者2013-09-01Advanced materials research
This essay describes the findings of generating the electrode composite of polyaniline/activated carbon fiber ( PANI/ACF) by repeatedly immersing eigenstate PANI into the solution of NMP and CHCl3 added with VC. A samples surface profile and structure were represented using SEM and FT-IR. Thereafter the composite was…
Supercapacitor Materials and FabricationElectrochemical sensors and biosensorsConducting polymers and applications
Somrerk Chandra-ambhorn、Thublaor Tummaporn、Pongpankasame Jiradech2013-09-01Advanced materials research
The SiMo cast iron with 5.45 wt% of Al has been developed for using as an automotive exhaust manifold. Cyclic oxidation test of that alloy and the conventional SiMo cast iron was conducted at 850 oC in 5%CO2+12%O2+83%N2 and 10%CO2+12%O2+78%N2. It was found that oxidation kinetics of the SiMo cast iron alloyed with 5.4…
Aluminum Alloys Composites PropertiesIntermetallics and Advanced Alloy PropertiesMetal Alloys Wear and Properties
S. Ningshen、Masatoshi Sakairi、K. Sukuki 等 4 位作者2013-09-01Advanced materials research
An oxide dispersion strengthened steels are one of the most promising high temperatures, and high performance advanced structural material being developed for future fast reactors and high-temperature Generation IV reactors. In the present work, the corrosion resistance and its correlation with the passive film compos…
Fusion materials and technologiesNuclear Materials and PropertiesNuclear Physics and Applications
Yu. N. Ivanov、A. A. Sukhovskiĭ、Н. В. Волков2013-09-01Journal of Structural Chemistry
The 11B NMR method is used to study the crystals of trigonal alumina borates Ho1−x Y x Al3(BO3)4 (x = 0, 0.5, 1). The temperature-field evolution of quadrupole and hyperfine interactions in these compounds is studied and described.
Ferroelectric and Piezoelectric MaterialsMultiferroics and related materialsCrystal Structures and Properties
Zélia Maria Velloso Missagia、Júlio César dos Santos、Túlio Hallak Panzera 等 6 位作者2013-09-01Ambiente Construído
Este trabalho tem como objetivo investigar propriedades físicas (densidade volumétrica e absorção de água) e mecânicas (módulo de elasticidade e resistência à compressão) de materiais compósitos particulados em matriz epóxi reforçados com serragem de madeira, cimento Portland e silicato de magnésio. Um planejamento ex…
Wood Treatment and PropertiesNatural Fiber Reinforced CompositesLignin and Wood Chemistry
Anna Portell、Xavier Alcobé、Latévi Max Lawson Daku 等 5 位作者2013-09-01Powder Diffraction
The crystal structure of the third polymorph of dibenzylsquaramide (Portell, A. et al., 2009 ), (fig. 1) has been determined from laboratory X-ray powder diffraction data by means of direct space methods using the computing program FOX. (Favre-Nicolin and Černý, 2002) The structure resolution has not been straightforw…
Crystallography and molecular interactionsX-ray Diffraction in CrystallographyPolymer Synthesis and Characterization
Akihito Ogawa、Takashi Usui、Hideaki Okano 等 5 位作者2013-09-01Japanese Journal of Applied Physics
We propose a physical address format suitable for the separated guide layer of a multilayered optical disc. Since the track format of the guide layer is different from that of conventional multilayered discs, a novel address format is required. The proposed format adopts a land-and-groove-track structure to generate a…
Liquid Crystal Research AdvancementsPhase-change materials and chalcogenidesAdhesion, Friction, and Surface Interactions
Yi Wu、Jian Wei、Dun Qiu Wang2013-09-01Advanced materials research
This paper reviews the emerging applications of mesoporous silica materials to be as adsorbents for heavy metals removal from the wastewater. Functionalization of the ordered mesoporous silica with organic or hybrid function groups provides new opportunities for fine-tuning the chemical, physical and mechanical proper…
Adsorption and biosorption for pollutant removalZeolite Catalysis and SynthesisMesoporous Materials and Catalysis
E. Guzik、D. Wierzchowski2013-09-01Archives of Metallurgy and Materials
Abstract Below are described results of the analysis concerning the use of two cored wire injection method (2PE- 9) and the unique application of a drum ladle as a treatment, transport and casting one, instead of a vertical treatment ladle. Parameter optimization, like: length of nodulariser wire, residual magnesium c…
Aluminum Alloy Microstructure PropertiesMetal Alloys Wear and PropertiesInduction Heating and Inverter Technology
You Wang、Sha Sha Jiang、Yu Peng Liu2013-09-01Advanced materials research
Silicone rubber have been aged in air while under 25% compression at temperature up to 250°C. These studies examined the compression set of silicone rubber at accelerated (elevated) temperatures and were then used to make predictions about compression set at room temperature. The data obtained could be amenable to tim…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesThermal and Kinetic Analysis
Isidro D. Obregon、Brandi S Betts-Obregon、Brian Yust 等 7 位作者2013-09-01Advanced materials research
Nanoparticles are presently being studied for optical and biomedical applications such as medical imaging and drug delivery. Nanoparticles impact the cellular environment due to many variables such as size, shape, and composition. How these factors affect cell viability is not fully understood. The purpose of this stu…
Nanoparticles: synthesis and applicationsAdvanced Nanomaterials in CatalysisGraphene and Nanomaterials Applications
Stevan Arsenijević、Cedomir Petrovic、László Forró 等 4 位作者2013-09-01Europhysics Letters (EPL)
To identify possible spin texture contributions to thermoelectric transport, we present a detailed temperature and pressure dependence of thermopower S in MnSi, as well as a low-temperature study of S in a magnetic field. We find that S / T reconstructs the phase diagram of MnSi encompassing the Fermi liquid, partiall…
Advanced Thermoelectric Materials and DevicesAdvanced Physical and Chemical Molecular InteractionsChemical and Physical Properties of Materials
Su Min Cui、Li Li Ren、Feng Cao2013-09-01Advanced materials research
Mesoporous inorganic alumina with framework walls has been synthesized using a new and simple non-supercritical drying method. As a substitute solvent, hexamethyl disilylamine (HMDS) plays a definitive part for synthesis of the mesoporous alumina due to its special characters. The resulting alumina product shows high…
Advanced ceramic materials synthesisSemiconductor materials and devicesMesoporous Materials and Catalysis
Neil M. Ram、Larry McTiernan、Lauren Kinney2013-09-01Remediation Journal
Abstract Environmental professionals are often tasked with projecting the cost to bring a contaminated site or portfolio of sites to regulatory closure. Fortunately, there are a number of useful guidance documents and industry publications available to assist in such cost projections. However, the usefulness of such t…
Risk and Safety AnalysisEngineering and Material Science ResearchNuclear and radioactivity studies
Jae Sung Yoon、Suk-Kwon Kim、Eo Hwak Lee 等 5 位作者2013-09-01Fusion Science & Technology
Korea (KO) has developed and participated in the Test Blanket Module (TBM) program in the ITER, in which Ferritic Martensitic (FM) steel was used as the structural material for the TBM first wall (FW). To develop the fabrication method for the TBM FW and verify its integrity, a half-scale sub-module mock-up was fabric…
Fusion materials and technologiesNuclear Materials and PropertiesSuperconducting Materials and Applications
L.V. Boccaccini2013-09-01Fusion Science & Technology
In the last years EU started a new effort for the definition of a Roadmap for the fusion beyond ITER up to the construction of the DEMO reactor. The blanket technology, key issue for the development of the fusion breeder reactor, is an important part of this review. In the last 10 years the R&D of EU in blanket has be…
Fusion materials and technologiesNuclear reactor physics and engineeringNuclear Materials and Properties
V. F. Onyshchenko、Л. А. Карачевцева2013-09-01Ukrainian Journal of Physics
The effective conductivity and the photoconductivity in two-dimensional macroporous silicon structures have been measured, and their dependences on the macropore concentration and diameter have been calculated. The effective conductivity of macroporous silicon structures is found to decrease as the concentration and t…
Semiconductor materials and devicesSilicon Nanostructures and PhotoluminescenceNanowire Synthesis and Applications
Fatemeh Mokhtari、Payam Mirzadeh Vaghefi、Mahnaz Shamshirsaz 等 4 位作者2013-09-01Journal of Engineered Fibers and Fabrics
Analysis of Compressibility Behavior in Warp Knitted Spacer Fabrics: Experiments and Van Wyk Theory
Mechanical Behavior of CompositesNatural Fiber Reinforced CompositesTextile materials and evaluations