Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Polymer-based composite materials are being used extensively in semiconductor packaging as thermal interface materials. In the flip-chip technology these materials are inserted between the chip and the heat spreader and also between the heat spreader and heat sink. The composites generally have a polymer base and high…
Described in this article is an apparatus in which thermopower and resistivity can be measured almost simultaneously from 10 to 300 K in a closed cycle refrigerator system. A distinction of this system is that the samples are mounted on integrated circuit (IC) chips for rapid introduction of the sample into the measur…
The synthesis and characterization of a soluble metal-free polyethyleneoxide-capped phthalocyanine and the corresponding lead compound are described. This phthalocyanine was designed to allow the formation of dimers but to inhibit formation of higher aggregates. The monomer/dimer equilibrium constant in chloroform sol…
The silicon–cerium oxide interface is studied using x-ray photoelectron spectroscopy. The oxidation and reduction of species at the interface are examined as a function of annealing temperature both in vacuum and oxygen ambient, in order to determine their relative stabilities. By depositing a very thin CeO2 film (∼30…
An antireflection surface with sub-wavelength structure has been successfully fabricated on a fused silica substrate. The fabricated antireflection structured surface consists of a microcone array of fused silica with a period shorter than the wavelengths of visible light. The microcone array is made by a reactive ion…
Recent developments in solid oxide fuel cell (SOFC) materials and stacks have been reviewed mainly from the viewpoint of the materials chemistry associated with stack development. Firstly the general features of SOFCs are described to clarify the materials problems which need to be solved and the technology that needs…
Highly conductive and transparent aluminum-doped zinc oxide thin films have been prepared from the solution of zinc acetate and aluminum nitrate in ethanol by the sol–gel process. The effect of changing the aluminum-to-zinc ratio from 0 to 5 at. % and annealing temperature from 0 °C to 700 °C in air has been investiga…
Stable hollow polyelectrolyte capsules were produced by the layer-by-layer assembling of non-biodegradable polyelectrolytes – poly(allylamine) and poly(styrenesulfonate) on melamine formaldehyde microcores followed by the core decomposition at low pH. A proteolytic enzyme, α-chymotrypsin, was encapsulated into these m…
We here tabulate and describe all currently recognized proteins of the phosphoenolpyruvate:sugar phosphotransferase system (PTS) and their homologues encoded within the genomes of sequenced E. coli strains. There are five recognized Enzyme I homologues and six recognized HPr homologues. A nitrogen-metabolic PTS phosph…
We present a new interatomic potential capable of describing the cubic and tetragonal phases of zirconia. From an analysis of molecular‐dynamics simulations of the structural fluctuations in the cubic phase close to the transition temperature, we show that the cubic‐to‐tetragonal transition is displacive. In addition,…
Highly weathered kaolinitic soils in Brazil often have adequate levels of K and Mg to support plant growth. The source of K and Mg in these soils and their relationship with the dominant mineral, kaolinite, is addressed in this article. Crystallographic, chemical, and morphological properties of kaolinite, from select…
Using the Lagrangian formalism, equations of radial and translational motions of two coupled spherical gas bubbles have been derived up to terms of third order in the inverse distance between the bubbles. The equations of radial pulsations were then modified, for the purpose of allowing for effects of liquid compressi…
This article presents experimental results of the dynamic yield strength and dynamic tensile strength (“spall strength”) of aluminum single crystals at shock-wave loading as a function of temperature. The load duration was ∼40 and ∼200 ns. The temperature varied from 20 to 650 °C which is only by 10 °C below the melti…
Freeze‐drying concepts were utilized in the shape forming of alumina parts by pressureless slip molding using aqueous slurries. A water solidification modifier, glycerol, was utilized to eliminate the defects associated with the expansion and ceramic particle rejection of water during freezing. Castable alumina slurri…
Liquid crystals are molecular materials that combine anisotropy with dynamic nature. Recently, the use of hydrogen bonding for the design of functional liquid crystalline materials has been shown to be a versatile approach toward the control of simple molecularly assembled structures and the induction of dynamic funct…
OBJECTIVE: Previous tissue engineering approaches to create small caliber vascular grafts have been limited by the structural and mechanical immaturity of the constructs. This study uses a novel in vitro pulse duplicator system providing a 'biomimetic' environment during tissue formation to yield more mature, implanta…
The magnetostriction (/spl lambda//sub 100/) of b.c.c. Fe is increased over 10-fold at room temperature by the substitution of /spl sim/20% gallium for Fe. Fe/sub 1-x/Ga/sub x/ alloys with x between 0.19 and 0.214 that are quenched from 800/spl deg/C exhibit magnetostrictions /spl sim/25% higher than those furnace-coo…
Abstract This paper discusses the competing chemical reactions involved in the peroxide vulcanization of elastomers. Each of these reactions can have a profound effect on the cure characteristics as well as on the properties of the final vulcanizate. The balance between these reactions is determined by several factors…
Two silica-precipitating peptides, silaffin-1A(1) and-1A(2), both encoded by the sil1 gene from the diatom Cylindrotheca fusiformis, were extracted from cell walls and purified to homogeneity. The chemical structures were determined by protein chemical methods combined with mass spectrometry. Silaffin-1A(1) and -1A(2)…
The conduction process in conducting polymers has some unusual features. Even for highly conducting samples, the electronic transport properties show a mixture of metallic and non-metallic character, which is most easily explained in terms of the heterogeneous morphology of the polymers. The Figure shows the character…