Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Fermented tapioca which is a new starting material was used as a carbon precursor. Carbon nanotubes (CNTs) were deposited on silicon wafer (Si) by Thermal Chemical Vapor Deposition (TCVD). The gas flow of Argon (Ar) was constant at 70 bubbles per minute and 20 minutes of deposition time. Before the deposition process,…
The mechanical properties and corrosion performances of the ZL101 alloy modified by the composite master alloy were investigated. The results showed that the master alloy had not only obvious effect of grain refinement, but also a significant role in refining dendrite grain of ZL101 alloy. The grain size decreased dra…
The Co2Z ferrites noise suppression sheet was prepared by tape casting. Its microstructural characterization was performed by electron microscopy and noise suppression effect was measured by a microstrip line method. Results indicate that as the sinter temperature increases, the imaginary permeability increases leadin…
The heterogeneous dielectric in the form of a statistical mixture of nonextended particles is considered; the existence of through conductivity in each component is examined, and an expression for the complex dielectric permeability of this system is obtained. The conditions for the development of strong relaxation po…
Usually the prediction of the lifetime of building materials is based on costly and time-consuming laboratory experiments. Numerical simulation of transport processes and the resulting chemical reactions in building materials is a versatile tool to estimate durability and corrosion processes of structures. Several stu…
Holographic diffraction gratings can measure micro movements, with a system that detects each period of the moving grating. One of the important features of this device is the grating period, which determines the measurement accuracy. The period can be on the order of fractions of micron, with high reproducibility and…
쾌속조형기술을 이용한 3 차원 형상의 인공지지체가 조직공학 적용을 위해 개발되고 제작되었다. 본 연구에서는 폴리머 적층 시스템을 이용한 스캐폴드 제작에 있어 시린지 노즐 부분에 노즐 가이드를 장착하여 폴리머 적층 폭과 높이 실험을 수행하였다. 이 때 인공지지체 제작을 위한 생체재료로 폴리카 프로락톤이 사용되었다. 폴리머 적층 공정 조건으로는 600 kPa 의 공압과 125℃의 온도가 이용되었다. 성공적인 와셔 인공지지체 제작을 통해 폴리머 적층 시스템에 적용된 노즐 가이드의 성능이 검증되었다. 결론적으로, 향상된 폴리머 적층 시스템을 이용함으로써 복잡한 형상의 조직…
Heat conductivity is a well-known energy transfer method and it is here applied to the study of metal foams and laser processing. Metallic hollow sphere structures (MHSS), a relatively new group of advanced composite materials, combine the advantages of cellular metals without major scattering of their material parame…
Effect of coil temperature on the texture and microstructure evolution during cold rolling and annealing were investigated by OM, ODF and EBSD. The results indicate that the {223}<110> and {114}<110> textures appeared after cold rolling are inherited followed by annealing, whose intensities would be higher as the coil…
Multiple target magnetron sputtering technique was employed for the deposition of (Cr,V)2AlC thin films, on the substrate of Si wafer at temperatures ranging from ambient to 840 K. The chemical composition and crystal structure of the deposited thin films were analyzed, surfaces as well the cross sections observed. Th…
Al2O3 matrix composites reinforced with Ba-b-Al2O3 phase were synthesized through reactive sintering using Al2O3 and BaCO3 as starting powders. Dense Al2O3/Ba-b-Al2O3 composites can be obtained by spark plasma sintering from Al2O3/BaO•Al2O3 powder, which was prepared by calcining Al2O3/BaCO3 powder mixture. The Ba-b-A…
Στην παρούσα διατριβή, το ενδιαφέρον επικεντρώνεται στην μελέτη των διασυνδετικών ταλαντώσεων οι οποίες ανήκουν στις ηλεκτρομηχανικές ταλαντώσεις και εμφανίζονται συνήθως λόγω των ασθενών διασυνδέσεων μεταξύ ηλεκτρικών συστημάτων. Η διαρκής λειτουργία των ΣΗΕ κοντά στα όριά τους σε συνδυασμό με το γεγονός ότι οι ταλαν…
A tripodal receptor bearing the S,N donor sites was investigated for the extraction and transportation of metal ions. The receptor showed selectivity towards nickel ion as it could extract 87% of nickel ion from aqueous medium. Subsequently, nickel nanoparticles were synthesised by reduction of Ni2+ with NaBH4 at an o…
Two reactive azo dyes Reactive yellow 84 (RY84) and Reactive Red 120 (RR120) were investigated voltammetrically using plain glassy carbon electrode (GCE) and multiwalled carbon nanotube modified GCE (MWCNT/GCE). Influence of pH, scan rate and concentration on voltammograms were studied. The irreversible oxidation proc…
Ni-doped titanate nanorods were synthesized from anatase TiO2 powder and Ni nitrate using a one-step hydrothermal reaction in alkaline solution. The nanorods are straight with lengths a few micrometer and diameters between 80 and 120 nm. The Ni-doped nanorods have the similar structure as hydrogen titanate nanorods of…
In this paper, carbon nanotubes were characterized by several characterization methods such as FESEM (field emission scanning electron microscopy), Raman spectroscopy and fourier transform infrared (FTIR) spectroscopy. FESEM is used to characterize the morphology of carbon nanotubes, the structural is characterize by…
The Journal of Nuclear Science and Technology (JNST) dates back to 1964 when it was first established by the Atomic Energy Society of Japan (AESJ), and the journal remains to be one of their offici...
Amorphous Pb(Zr0.52Ti0.48)O3 (PZT) thin films were deposited on LNO/SiO2/Si and Pt/Ti/SiO2/Si substrates by a sol-gel method and then crystallized by microwave irradiation in the microwave magnetic field. The crystalline phases and microstructures as well as ferroelectric property of the PZT films were investigated, a…
The hot rolling processes of slabs have been simulated by 3-D explicit dynamics Thermal-mechanical Finite Element Model (FEM) to solve the problems of edge defects. It can analyze the deformation characteristics of rolling slabs, calculate Lode parameter values in rolling deformation zone and analyze the stress-strain…
Depuis plusieurs milliers d’années, la lumière qu’elle soit naturelle ou artificielle a été utilisée comme traitement pour certaines maladies de la peau, des yeux ou contre le cancer. Ce n’est qu’au début du 20e siècle que la science s’est intéressée aux interactions « lumière-vivant ». La compréhension de l’action co…