Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Carrier injection from organic contacts to tetramethyltetrathiafulvalene (TMTTF) is investigated in the thin-film transistors. When 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) is patterned on a TMTTF film, the resulting (TMTTF)(TCNQ) works as highly conducting source and drain electrodes. Such self-contact transistors,…
Abstract Fluorescent silica nanoparticles (FSNs) are prepared by incorporating dye into a mesoporous silica nanoparticle (MSN) synthesis procedure. FSNs containing sulforhodamine B, hydrophobically modified sulforhodamine B, and Cascade Blue hydrazide are made. The MSN‐based FSNs do not leach dye under simulated physi…
The effects of film thickness and epitaxial strain on the magnetic properties of commensurate EuO thin films grown on single crystalline (001) yttria-stabilized zirconia (YSZ) and (110) LuAlO3 substrates are presented. Magnetic measurements show a reduction in the Curie temperature (TC) for EuO/YSZ films thinner than…
Abstract The method of atomistic molecular dynamics simulations is used to investigate the static properties of the organic–inorganic interface in a polymer nanocomposite consisting of polyimide and silica nanoparticles with modified surface. Alkylsilane chains are used as the surface modifiers. The surface density an…
In this work, the structural, electrical, and magnetic properties of orthorhombic TbMnO3 and Tb0.67Ho0.33MnO3 ceramics are presented. The lattice parameters and the Mn-O-Mn bond angle were found to decrease with Ho-substitution as evidenced by Rietveld refinement of the X-ray diffraction data and Raman spectroscopy me…
Thermoelectric elements, made of semiconductor slices laminated onto highly conductive interconnector materials, are termed composite thermoelectric device (TED). An integrated TED is a composite TED with the interconnector designed as an internal heat exchanger with flow channels directing the working fluid between t…
We explore ground-state structures and stoichiometries of the Be-B system in the static limit, with Be atom concentrations of 20 % or greater, and from P = 1 atm up to 320 GPa. At P = 1 atm, predictions are offered for several known compounds, the structures of which have not yet been determined experimentally. Specif…
The unique properties of gallium nitride (GaN) crystal, such as a wide band-gap and high thermal conductivity, make it ideal material for electronic and optoelectronic devices. Achieving room temperature (RT) ferromagnetism in GaN becomes crucial. In previous works, gallium vacancy (VGa) was expected to be promising f…
Organically modified nanoclays have been reported to play the role of a compatibilizer for immiscible polymer blends. However, the mechanism of compatibilization by nanoclay has been reported differently. In this work, we investigated the exact mechanism of compatibilization of nanoclay in immiscible polystyrene (PS)/…
Poly(3,4-ethylenedioxythiophene):poly(stylenesulfonate) (PEDOT:PSS)/n-Si hybrid solar cells were studied with and without embedding green-tea modify multiwalled carbon nanotubes (MWCNTs) at interface. Devices fabricated with embedding green-tea modified MWCNTs show much better performance than that of a device without…
We report high conductivity of 185 (Ω cm)−1 and superior electron field emission (EFE) properties, viz. low turn-on field of 4.88 V/μm with high EFE current density of 6.52 mA/cm2 at an applied field of 8.0 V/μm in ultrananocrystalline diamond (UNCD) films due to gold ion implantation. Transmission electron microscopy…
We have studied the low spin to high spin phase transition induced by nanosecond laser pulses outside and within the thermal hysteresis loop of the [Fe(Htrz)2 trz](BF4)2-H2O spin crossover nanoparticles. We demonstrate that, whatever the temperature of the compound, the photo-switching is achieved in less than 12.5 ns…
The Cr³⁺₋Yb³⁺ codoped YAG crystals were synthesized by the solid state reaction method, in which the intense near-infrared emission around 1000 nm originated from Yb³⁺ ²F₅/₂ →²F₇/₂ transition was obtained due to the efficient energy transfer from Cr³⁺ to Yb³⁺. The stable and transient spectral measurements revealed th…
Abstract Natural polymers are defined as high value polymeric materials because of their biocompatibility with medical applications. The chemical modification of these materials by grafting synthetic polymers has received considerable attention in recent years. As the first part of this research, transmutation of the…
Metal oxide precursors (ca. 90 wt pct Ti, 6 wt pct Al, and 4 wt pct V) were prepared with a hollow structure in various shapes such as a sphere, miniature golf club head, and cup using a one-step solid slip-casting process. The precursors were then electro-deoxidized in molten calcium chloride [3.2 V, 1173 K (900 °C)]…
Single-layer graphene sheets grown on Cu foils by chemical vapor deposition were transferred on 300 nm SiO2/n-type Si wafers and subsequently doped with 10 mM AuCl3 solution. The doped graphene sheets were annealed at various temperatures (TA) under vacuum below 10−3 Torr for 10 min and characterized by atomic force m…
In this study, PP and Talc/EPDM/PP composite materials are used. Foaming process is achieved by a conventional injection molding method. The influence of injection pressure and melting temperature on the average cell dimension, cell number, skin layer thickness, foam density and mechanical properties of investegated f…
Using molecular dynamics simulations, we demonstrate that the efficiency of heat exchange between a solid and a gas can be maximized by functionalizing solid surface with organic self-assembled monolayers (SAMs). We observe that for bare metal surfaces, the thermal accommodation coefficient (TAC) strongly depends on t…
Experimental measurements and ab initio modeling of the optical transitions in strained $G$-type antiferromagnetic ${\mathrm{LaCrO}}_{3}$ resolve two decades of debate regarding the magnitude of the band gap and the character of the optical absorption spectrum in the visible-to-ultraviolet (up to $\ensuremath{\sim}5\t…
In this article, the authors describe an efficient process for the fabrication of a composite superhydrophobic coating on Mg-Mn-Ce alloy. The authors show that the preliminary plasma electrolytic oxidation of alloy, with controlled density of surface hydroxyl groups, allows manipulation of the adhesion, structure and…