Baozhong Sun、Bohong Gu2007-11-05Journal of Composite Materials
This article presents Fourier transform and wavelet packet analysis of stress waves in a split Hopkinson pressure bar apparatus where the compressive behaviors of 3-D angle-interlock woven composite were tested at strain rate of 800/s, 1600/s and 2100/s. The stress waves in incident and transmission bar are transforme…
Mechanical Behavior of CompositesHigh-Velocity Impact and Material BehaviorStructural Response to Dynamic Loads
J. Agostinho Moreira、A. Almeida、M. R. Chaves 等 6 位作者2007-11-05Physical Review B
This work reports a detailed study of the temperature dependence of the lattice dynamics of single crystal sodium ammonium sulphate dihydrate (SASD) obtained from polarized Raman scattering. The phase transitions in SASD are marked by the appearance of new weak bands and anomalies in the temperature dependence of wave…
Nonlinear Optical Materials ResearchAcoustic Wave Resonator TechnologiesSolid-state spectroscopy and crystallography
Ronnie O. Frederick、Lai F. Bergeman、Paul G. Blommel 等 20 位作者2007-11-05Journal of Structural and Functional Genomics
A simple approach that allows cost-effective automated purification of recombinant proteins in levels sufficient for functional characterization or structural studies is described. Studies with four human stem cell proteins, an engineered version of green fluorescent protein, and other proteins are included. The metho…
Protein purification and stabilityEnzyme Structure and FunctionViral Infectious Diseases and Gene Expression in Insects
Zengping Zhang、Guozheng Liang、Penggang Ren 等 4 位作者2007-11-05Polymer Composites
Abstract The thermodegradation kinetics of a hybrid inorganic–organic epoxy system formed by diglycidyl ether of bisphenol A, DGEBA/DDS, modified with octahedral oligomeric silsesquioxane, octa(aminopropylsilsesquioxane) was studied. The average activation energy of thermodegradation of this system was calculated by t…
Polymer Nanocomposites and PropertiesSynthesis and properties of polymersSilicone and Siloxane Chemistry
Zhonghua Li、Yan Dong、Shu Li 等 5 位作者2007-11-05Applied Physics Letters
A simple expression has been derived for the prediction of the creep rate controlled by electromigration-induced grain boundary diffusion. The creep rate depends linearly on the current density and the grain boundary diffusivity, and inversely on grain size squared. It is also demonstrated that the electromigration-in…
Microstructure and mechanical propertiesCopper Interconnects and ReliabilitySemiconductor materials and interfaces
S. Sathiyanarayanan、S. Syed Azim、G. Venkatachari2007-11-05Journal of Applied Polymer Science
Abstract Polyaniline‐phosphate polymer was prepared chemically by oxidation polymerization of aniline in phosphoric acid medium using ammonium persulphate. The PANI‐phosphate polymer was characterized by FTIR, XRD, and SEM. The paints using PANI‐phosphate as pigment in acrylic and epoxy binder were prepared. The prote…
Corrosion Behavior and InhibitionConducting polymers and applicationsAnalytical Chemistry and Sensors
Takenori Sakuma、Atsushi Kumagai、Naozumi Teramoto 等 4 位作者2007-11-05Journal of Applied Polymer Science
Abstract Itaconate‐unit‐containing poly(butylene succinate) (PBSI) was synthesized by the reaction of 1,4‐butanediol, succinic acid, and itaconic acid in a molar ratio of 2.0 : 1.0 : 1.0, and the obtained PBSI was reacted with methacryl‐group‐substituted polysilsesquioxane (ME‐PSQ) in the presence of benzoyl peroxide…
Polymer Nanocomposites and Propertiesbiodegradable polymer synthesis and propertiesSilicone and Siloxane Chemistry
Hamid Yeganeh、Shahram Mehdipour‐Ataei、Mehdi Ghaffari2007-11-05High Performance Polymers
Polyurethane networks with enhanced thermal stability and electrical insulation properties were prepared from the reaction of epoxy-terminated urethane prepolymers (EPU) and polyimides containing pendant phenol groups (HPI). EPUs were prepared by the reaction of glycidol with NCO-terminated urethane oligomers. The oli…
Polymer composites and self-healingEpoxy Resin Curing ProcessesSynthesis and properties of polymers
K. C. Gupta、Alekha Kumar Sutar2007-11-05Polymers for Advanced Technologies
Abstract The metal complexes of N , N ′‐bis ( o ‐hydroxy acetophenone) propylene diamine (HPPn) Schiff base were supported on cross‐linked polystyrene beads. The complexation of iron(III), copper(II), and zinc(II) ions on polymer‐anchored HPPn Schiff base was 83.4, 85.7, and 84.5 wt%, respectively, whereas the complex…
Metal-Organic Frameworks: Synthesis and ApplicationsCorrosion Behavior and InhibitionPolyoxometalates: Synthesis and Applications
Jan Kalfus、J. Jancar2007-11-05Polymer Composites
Abstract Dynamic‐strain softening known as the Payne effect was investigated in the case of poly(vinyl acetate)‐hydroxyapatite (PVAc‐HA) model nanocomposites in which the nanoparticles served as reversible physical cross‐links. HA nanofillers with different particle shape and with size ranging from 5 to 60 nm were use…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesPolymer Nanocomposite Synthesis and Irradiation
Cheng-Jun Sun、Zhihua Xu、Bin Hu 等 6 位作者2007-11-05Applied Physics Letters
In an attempt to overcome the technical challenges in the conventional solution-processed near infrared (NIR) photodetectors, we have used NaYF4:Yb, Er upconversion fluorescence nanocrystals to replace the semiconductor quantum dots in conjugated polymers. Under NIR excitation, the NaYF4:Yb, Er nanocrystals emit visib…
Luminescence Properties of Advanced MaterialsPerovskite Materials and ApplicationsQuantum Dots Synthesis And Properties
F. Ya. Nad、P. Monçeau、Hiroshi Yamamoto2007-11-05Physical Review B
We present results of measurements of the conductance and dielectric permittivity at various cooling and heating rates through the phase transition into the charge-ordered state in $\ensuremath{\theta}\text{\ensuremath{-}}{(\mathrm{BEDT}\text{\ensuremath{-}}\mathrm{TTF})}_{2}\mathrm{Rb}\mathrm{Zn}{(\mathrm{S}\mathrm{C…
Perovskite Materials and ApplicationsMagnetism in coordination complexesOrganic and Molecular Conductors Research
Yao‐Hsuan Tseng、Wen-Hung Tseng、Ching‐Hsiung Lin 等 4 位作者2007-11-05Advanced Materials
A straightforward and effective method for the fabrication of double-length-scale patterned (i.e., composite micro- and nanopatterned) carbon nanotube (CNT) arrays can be achieved by block copolymer templating on a prepatterned conducting substrate followed by electroplating to deposit Ni (see figure). Significant imp…
Organic Electronics and PhotovoltaicsBlock Copolymer Self-AssemblyNanopore and Nanochannel Transport Studies
Yimin Yao、Zhongze Gu、Jinzhong Zhang 等 6 位作者2007-11-05Advanced Materials
A novel fiber-oriented scattering polarizer is prepared by infiltrating liquid crystal into an aligned-fiber film (schematically shown in the figure), which is fabricated by using an optimized strategy of anisotropic electrospinning. The new-style polarizer has a high polarizing efficiency, is simple to fabricate and…
Surface Modification and SuperhydrophobicityAdvanced Sensor and Energy Harvesting MaterialsElectrospun Nanofibers in Biomedical Applications
Vijayalakshmi Rao、Jobish Johns2007-11-05Journal of Applied Polymer Science
Abstract Thermoplastic chitosan/natural rubber blends (Cs/NR) were prepared from natural rubber latex and chitosan by solution casting technique. The blends were characterized by mechanical analysis (stress–strain) and the mechanical properties were found to vary with chitosan/natural rubber ratios. Experimental value…
Nanocomposite Films for Food PackagingPolymer Nanocomposites and Propertiesbiodegradable polymer synthesis and properties
J. Durinck、Philippe Carrez、Patrick Cordier2007-11-05European Journal of Mineralogy
International audience
Microstructure and mechanical propertiesHigh-pressure geophysics and materialsX-ray Diffraction in Crystallography
Feng Xiang、Hong Wang、Kecheng Li 等 7 位作者2007-11-05Applied Physics Letters
The Ba0.6Sr0.4TiO3 (BST)/poly(methyl methacrylate) (PMMA) tunable composites in 1-3-type structure consisting of BST rods in low-permittivity PMMA matrix are fabricated by dice and fill technique. For the composite containing 41.6vol% BST, the permittivity and the loss tangent of the composite are 1212 and 0.026 at 10…
Ferroelectric and Piezoelectric MaterialsDielectric materials and actuatorsMicrowave Dielectric Ceramics Synthesis
Hui Pan、Guichuan Xing、Zhenhua Ni 等 9 位作者2007-11-05Applied Physics Letters
High-quality CdS nanowires with wurtzite structure were produced by thermal evaporation of CdS powder. The nanowires were core-shell structures, consisting of crystalline core and amorphous/polycrystal shell. The intensity of the second-order longitudinal phonon mode in the Raman spectrum of the CdS nanowires is highe…
Quantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin FilmsNanowire Synthesis and Applications
Kai Wang、Lin Fan、Jingang Liu 等 5 位作者2007-11-05Journal of Applied Polymer Science
Abstract Two series of melt‐processable polyimides were prepared from 4,4′‐bis(3‐amino‐5‐trifluoromethylphenoxy)biphenyl ( m ‐6FBAB) and 4,4′‐bis(4‐amino‐5‐trifluoromethylphenoxy) biphenyl ( p ‐6FBAB) with various aromatic dianhydrides. The effects of the chemical structures of the polyimides on their properties, espe…
Epoxy Resin Curing ProcessesSynthesis and properties of polymersSilicone and Siloxane Chemistry
Sharon L. Webb、M. Banaszak、Ursula Köhler 等 5 位作者2007-11-05European Journal of Mineralogy
The viscosity of melts in the Na 2 O-CaO-Al 2 O 3 -SiO 2 system follows the same trend as a function of composition as that observed in the Na 2 O-Al 2 O 3 -SiO 2 system; in that there is a local maximum in viscosity at the condition Na 2 O+CaO ~Al 2 O 3 . This is despite the difference in charge of Na + and Ca 2+ , t…
Glass properties and applicationsMetallurgical Processes and ThermodynamicsNuclear materials and radiation effects